Availability
Showing In Stock Items. Show All 154 Items.
BendPak P-9000LTF low-rise open-center pit-style lifts have a lot of lifting potential. With their optional arm extension kit, high-stance trucks and SUVs can be easily serviced. Shops run faster and earn more with one of these lifts at their disposal. A host of clever engineering devices and standard features ensure this car lift will last for many years of valuable service. Additional facts and specs: * 9,000 lb. lifting capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick set-up
Not Yet Reviewed
$7,295.00
BendPak MDS-6LP mid-rise open-center lifts are designed for home garages, full-service shops, and quick-lube centers. Basically anyone that works on cars! Additional facts and specs: * 6,000 lb. lifting capacity * Four solid steel-scissor frame support bars make this one of the strongest mid-rise lifts in its class * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 lb. capacity * Push-button safety lock release system * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas * Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to operate at a different working heights to increase productivity
Not Yet Reviewed
$7,995.00
BendPak MDS-6LPF mid-rise open-center flush-mount lifts are designed for full-service shops and quick-lube centers. They will collapse perfectly parallel with your flooring for those full-service bays. Additional facts and specs: * 6,000 lb. lifting capacity * Four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 lb. capacity * Push-button safety lock release system * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas * Comes standard with four durable cushioned-rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to operate at a different working heights to increase productivity
Not Yet Reviewed
$7,895.00
Using long-wheelbase vehicles as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lifts to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their open-center design, just like their standard length MDS-6LP and MDS-6LPF models. The MDS-6EXTF extended-length, flush-mount, mid-rise lifts provide quick-lube stations looking to install a car lift flush over work pits. If your shop wants to be ready for longer-wheelbase vehicles and minimize the lift's footprint, you can't do better than BendPak's MDS-6EXTF mid-rise open-center car lift. Key features: * 6,000-lb. lifting capacity * Open-center design/flush-mount * Adjustable arm assemblies * Solid-steel safety lock bars * Multiple lock positions * Hinge-point with Zerk grease fittings * Low-profile design * Rubber blocks included * Removable ramps
Not Yet Reviewed
$8,295.00
The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
Not Yet Reviewed
$8,395.00
Expand the limits of your creative possibility and take your passion to a whole new level with the Powermatic 4224B Lathe with Lamp Kit—the newest member of the industry-leading family of lathes. At over 900 lbs., the 4224B lathe is the biggest, heaviest, and most capable machine Powermatic has ever built. With newly designed, top of its class features, the 4224B Lathe pushes the limits of design, innovation, and durability. Highlights and features: * Motor Power (HP) 3 * Bed construction cast iron * Motor Phase 3 * Recommended circuit size (Amps.) 30 * 15-amp quad receptacle for easy reach of powered accessories * Variable frequency drive allows machine to run on single- or three-phase power * Air nozzle with quick-connect for clearing dust/chips * Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers * Includes two 100-watt task lamps to provide ideal lighting and safety guard * Magnetic-backed moveable control box for versatility and safety * Set of dead centers—which holds a spindle for visual comparison * Sliding headstock with electronic variable-speed * Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes and other equally spaced features * Vacuum system provides quick method of chucking bowl blanks
Not Yet Reviewed
$7,799.00
Build your project exactly how you want with QA1 Level 2 Big Wheel kits! Get the perfect look by easily adjusting your ride height with front and rear coilovers. Raise or lower your car 2 in. the front. Raise it up to 2 in. or lower it by up to 3 in. in the rear. QA1 Level 2 Big Wheel kits allow you to dial-in the exact style you want in minutes with the included spanner wrench. These complete bolt-on suspension kits are designed to fit up to 28 in. wheels on your vehicle and include everything needed to get your Box sitting right, while giving you a better ride and improved handling. Product features and benefits: * Double-adjustable coilovers give you the ability to individually tune your shock compression and rebound to get the perfect ride and get more grip off the line for drag racing * Adjustable upper and lower trailing arms allow your wheel and tire package to fit with adjustable trailing arms that center your rear axle in the wheel well to gain more clearance for up to 28 in. wheels * Tubular control arms are much lighter and stronger than stock and will upgrade front-end geometry for better drivability—and are designed specifically for big wheel cars with corrected suspension angles for large wheels and tires * Tubular sway bars help reduce body roll and improve stability with front and rear sway bars to reduce handling issues that come from big wheels and raised ride heights * Easy, bolt-in installation * Parts come powdercoated and ready-to-install with all necessary hardware to allow you to bolt up the kit right in your garage or work with your local shop * Works with original factory rear axle housings or Quick Performance 9 in. rear axle housings
( 2 )
$5,094.95
—
$5,371.95
QA1 1988-98 C1500 front and rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 front control arms and rear torque arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long lasting durability. Topped off with performance ball joints and low-friction, maintenance-free bushings. Complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This kit will add more stability and allows for optimum camber adjustment in a lowered truck. Easily bolt in this system--no welding or bed removal required. Everything needed is included, all the way down to the hardware.
Not Yet Reviewed
$5,328.95
—
$6,547.95
RideTech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put RideTech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or ShockWaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions
Not Yet Reviewed
$6,495.00
—
$6,645.00
The RideTech 1970-81 Camaro/Firebird Complete CoilOver suspension systems include everything you need to completely upgrade your existing suspension. The package contains front upper and lower StrongArm control-arms, front MuscleBar, a rear Bolt On 4-Link, and 4 HQ Series CoilOvers shocks for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. RideTech Complete CoilOver systems include: - Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. - Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. - HQ Series CoilOver shocks utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling. The rebound knob is located at the top of the shock for under hood access. - Front MuscleBar helps to reduce body roll and creates room for wider front tires. It includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. - Bolt On 4-Link greatly improves traction, handling and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. Equally important, the unique design addresses production variations and frame rail thickness issues that are common to the second-generation F-Body platform. Works with minitubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!
Not Yet Reviewed
$5,605.00
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
RideTech 1967-69 Camaro/Firebird complete coilover suspension systems include everything you need to completely upgrade your existing suspension. The package contains front upper and lower StrongArm control arms, tall spindles, front MuscleBar, a rear bolt-on 4-link, and four HQ Series coilover shocks for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all the guesswork out of what are the best parts to purchase. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. RideTech complete coilover systems include: * RideTech tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. It also offers a 2 in. pin drop which allows for the use of longer shocks creating more suspension travel. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. The lower shock mount is dropped to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilover shocks utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MuscleBar helps to reduce body roll and creates room for wider front tires. It includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-Link greatly improves traction, handling, and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini tubs. The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.
Not Yet Reviewed
$5,975.00
RideTech 1964-67 GM A-body coilover suspension systems are specifically designed for the 1964-67 GM A-body platform. The package contains front upper and lower control arms, tall spindles, front and rear MuscleBars, rear StrongArms, and four HQ Series coilovers. RideTech 1964-67 GM A-body coilover suspension kits include everything needed to create modern drivability from vintage muscle. Features, parts, and specs: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering (they also offer a 2 in. pin drop which allows for longer shocks creating more suspension travel) * Upper StrongArms feature corrected ball joint angles for the tall spindles * Upper ball joints have been moved back to allow for additional caster setting (improves high speed stability and steering feel; offset slugs available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Dropped lower shock mount to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Brackets included with rear coilovers for easy attachment to the frame and the 10/12 bolt rear-end or Currie 9 in. (brackets for a Moser rear-end also available) * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear StrongArms provide added strength to help get the power to the pavement; they utilize R-joint technology to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing
Not Yet Reviewed
$5,645.00
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,398.99
RideTech 1959-64 GM B-body coilover suspension systems are specifically designed for the Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood. They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. Get the benefit of a complete suspension system that takes all of the guesswork out of your upgrade with a RideTech 1959-64 GM B-body coilover suspension kit. Features, items, and specs: * Tubular upper StrongArms feature corrected ball joint angles and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * Upper ball joint moved back allowing for additional caster settings for improved speed stability and steering feel * Tubular lower StrongArms feature a double-sheer lower mount for increased strength, and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * HQ Series coilovers utilize impact-forged aluminum body and monotube design to deliver excellent ride quality and handling; standard 1,000,0001 mile warranty included * Rebound knob located at top of shock for under hood access; allows fine-tuning of ride quality and handling * Hyperco springs provide consistent spring rate that will last a lifetime * Rear StrongArms provide added strength; utilize R-joint technology to provide smooth operation and reduce roll bind * Lower arms feature a double-sheer mount for coilovers, locating them in place of the stock springs and keeping load where it belongs. * Adjustable panhard bar allows axle to be centered at new ride height * Front and rear MuscleBars replace tiny factory sway bars, where applicable; they feature significantly higher rates, performance end links, and Delrin-lined bushings
( 1 )
$5,145.00
RideTech 1978-88 GM G-body coilover suspension systems include everything needed to provide modern drivability for your classic muscle. The rear StrongArm R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1978-88 GM G-body coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, items, and specs: * Upper StrongArms feature tall ball joints for increased camber gain * Upper ball joints have been moved back to allow for additional caster setting (improves high speed stability and steering feel; offset slugs available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Dropped lower shock mount to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series coilovers allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front coilovers for underhood access) * Brackets included with rear coilovers for easy attachment to the frame and the 10/12 bolt rear-end * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink end links that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement
Not Yet Reviewed
$5,420.00
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MuscleBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower StrongArms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MucleBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)
Not Yet Reviewed
$7,670.00
RideTech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * TruTurn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.
Not Yet Reviewed
$6,125.00
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$5,749.99
RideTech 1967-70 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These complete kits contain StrongArms, MuscleBar sway bars, and HQ Series coilovers, removing the guesswork out of purchasing the right components that will deliver the best performance and ride quality. Features include: * Upper StrongArms--powdercoated black and fully assembled with ball joints, bushing, and cross shafts. They feature corrected ball joint angles and the upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. * Lower StrongArms--double sheer lower mount for increased strength. They are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. * HQ Series coilovers--utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via rebound knob located at the top of the shock for underhood access. * Hyperco springs are used to provide a consistent spring rate that will last a lifetime. * Front MuscleBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. * Rear MuscleBar allows for fine tuning by sliding the arm on the bar to increase or decrease rate * Rear StrongArms provide added strength to get power to the pavement. R-Joint technology provides smooth operation and reduced roll bind. Lower is double sheer mount for coilovers, locating them in place of the stock springs. Upper arm and panhard bar are adjustable, allowing axle to be centered and pinion angle to be set.
Not Yet Reviewed
$5,330.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
—
$6,100.00
RideTech C1500 complete coilover systems include everything needed to create modern drivability with an aggressive stance for the 1988-98 Chevrolet and GMC C1500 trucks. The package contains front upper and lower StrongArm tubular A-arms, front and rear HQ Series coilover shocks, front sway bar, HD drop spindles, and rear wishbone with integrated C-notches. The benefit of a RideTech complete suspension system is that it removes all the guesswork as to which components to purchase—saving you time and money. Overview of features, specs, and parts: * Ride height is approximately 4 in. lower than stock in the front and 6 in. in the rear (coilovers add adjustability for rebound and ride height) * Front coilover setup includes HQ Series shocks and bolt-on upper shock mounts to allow more ground clearance and maximum suspension travel * HQ Series aluminum body shocks are a monotube design, rebound adjustable, and come with a 1,000,001 mile manufacturer warranty * Upper StrongArm A-arms feature corrected ball joint angles for the lowered ride height, and the length has been altered to create more camber adjustment. Injection-molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. Also includes integrated brake line mounting brackets. * Lower StrongArm A-arms feature a double-sheer lower shock mount for increased strength; the injection-molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. Also included are quality ball joints for a completely bolt-on experience. * Front MuscleBar sway bar is included to reduce body roll and includes the Delrin liners to minimize suspension bind * HD drop spindles are used to all the use of a longer stroke shock and improve suspension geometry and bump steer * Bolt-on wishbone system greatly improves traction, handling, and ride quality. Installation does not require welding or major modifications to the bed floor. -- Includes patent-pending R-joint rod ends to eliminate binding and noise -- Wishbone upper link (rather than panhard bar) for zero lateral movement during suspension travel allows extremely tight wheel/tire fitment -- Optimized anti-squat, instant center and pinion angle migration for dramatic improvements in handling and traction -- Bolt-on C-notch reinforces OEM frame rails and features integrated suspension mounts -- Simple installation with minimal OEM rivet removal
Not Yet Reviewed
$6,880.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
