Free Shipping on Orders Over $109 at Summit Racing

Hughes Performance Competition Transmissions

Hughes Performance competition transmissions deliver unsurpassed strength and reliability under the most severe conditions. The finest state-of-the-art performance parts are used in Hughes competition units. All internal and external components are inspected and then assembled to exact tolerances, thus ensuring top quality and performance. These transmissions are equipped with reverse-pattern, or, in some cases, forward-pattern valve bodies for sure, solid, quick shifts. They are also equipped with Hughes "Pro III" trans-brake valve bodies. These transmissions are designed with the capacity to withstand pass after pass.

Not Yet Reviewed

$5,742.99

—

$6,098.99

BluePrint Engines Ford 302 C.I.D. 361 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.

4.55 out of 5 stars ( 11 )

$6,899.00

—

$9,499.00

BluePrint Engines 302 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

Not Yet Reviewed

$6,299.00

BluePrint Engines Ford 302 C.I.D. Bronco Edition 365 HP Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. Bronco Edition 365 hp long block crate engines are available with a carbureted or fuel injected system. The base dressed engines are loaded with impressive features: DESCRIPTION: * Horsepower and torque: 365 hp / 365 lbs.-ft. * Compression ratio: 9.5:1 * Aluminum heads * Hydraulic roller cam * Cast steel crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-piece rear main seal ROTATING ASSEMBLY: * Cast steel crankshaft * 3.000 in. stroke * OEM type 5.090 in. connecting rods * Hypereutectic pistons * 50 oz. external balance CYLINDER HEADS: * BluePrint aluminum cylinder heads - HP9009 * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners CAM SPECS: * Cam type: Roller * .533 Intake / .544 Exhaust * 215 Intake / 220 Exhaust duration * @ .050 - 114 degree lobe separation IGNITION TIMING: * 10-16 degrees initial, 32-34 total ALSO INCLUDES: * Bronco script valve covers * Harmonic balancer * Dual plane satin aluminum intake manifold * 600 cfm carburetor (model BP302MAXCTC) …. Or …. EFI system (model BP302MAXCTF) * Distributor * Painted oil pan NOTES: * Painted Ford Blue * Recommended break in oil for your BluePrint crate engine: BPP710 * Not for EGR * Engine timing cover is designed for standard rotation water pump ONLY * Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B * On EFI model: Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.

Not Yet Reviewed

$7,799.00

—

$8,899.00

BluePrint Engines Ford 302 C.I.D. 365 HP Base Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 365 hp base dressed long block crate engines are a fantastic swap option. Here are the specifications: -- 365 hp / 365 lbs.-ft. torque -- Compression ratio: 9.5:1 -- Aluminum heads -- Hydraulic roller cam -- Cast steel crank -- Hypereutectic pistons * BLOCK: New BluePrint cast iron block 4-bolt main 4.000 in. bore 1-piece rear main seal * ROTATING ASSEMBLY: Cast steel crankshaft 3.000 in. stroke OEM-type 5.090 in. connecting rods Hypereutectic pistons 50 oz. external balance * CYLINDER HEADS: BluePrint aluminum cylinder heads 60cc chamber 2.02 in. intake/1.60 in. exhaust valves 190cc intake/60cc exhaust runners * CAM SPECS: Cam Type: Roller .533 Intake / .544 Exhaust 215 Intake / 220 Exhaust duration @ .050 - 114-degree lobe separation * IGNITION TIMING: 10-16 degrees initial, 32-34 total * ALSO INCLUDES: Bronco Script valve covers Harmonic Balancer * NOTES: -- Painted Ford Blue -- Recommended break-in oil for your BluePrint crate engine: BPP710 -- Not for EGR -- Engine timing cover is designed for standard rotation water pump ONLY -- Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B or similar

Not Yet Reviewed

$7,199.00

ATK High Performance Pro Street 632 800 HP Dressed Crate Engines

ATK High Performance Pro Street 632 c.i.d. 800 hp completely dressed crate engines are sure to turn heads! Hand built; they are stuffed with name brand quality components you can trust to ensure performance. Engine specifications: * Block: Dart Big M 10.2 deck, 4-bolt main, 2-piece seal * Bore/stroke: 4.600 in. x 4.750 in. * Displacement: 632 * Crankshaft: Scat 4340 forged internal balance * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.3:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 267/277 at 50 .680 intake/.680 exhaust 110LSA * Timing chain: Double roller * Cylinder heads: Dart Pro 1 aluminum 121cc/345cc 2.300/1.880 * Rocker arms: Howards billet aluminum 1.7 roller rockers * Oil pan: Moroso 7 qt. street/strip pan with windage tray * Oil pump: Melling high volume * Balancer: Power Bond SFI 7.950 in. * Intake manifold: Edelbrock Super Victor * Distributor: Pro billet (iron gear) * Carburetor: Quick Fuel 1150 cfm mechanical secondary * Spark plugs: Autolite #3934 * Spark plug wires: 8mm

Not Yet Reviewed

$16,499.99

Edelbrock E-Force TVS2300 Mustang Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force TVS2300 Mustang Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 TVS supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. Start your custom-built racer on a winning foundation with these Edelbrock E-Force Mustang Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.

Not Yet Reviewed

$6,469.95

—

$6,931.95

Edelbrock E-Force Corvette C6 Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force Corvette C6 Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. Start your custom-built racer on a winning foundation that's made in America with these Edelbrock E-Force Corvette C6 Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.

Not Yet Reviewed

$7,561.95

BluePrint Engines GM 327 C.I.D. 350 HP Deluxe Dressed Long Block Crate Engines

BluePrint Engines GM 327 c.i.d. 350 hp fully dressed long block crate engines are available with a Holley Sniper EFI system or a 670 cfm carburetor with electric choke. BASIC ENGINE SPECS: * HP and torque: 350 hp / 350 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-Piece rear main seal * Mech fuel pump provision: Yes * Passenger side dipstick * Drilled and tapped for clutch linkage ROTATING ASSEMBLY: * New BluePrint forged crankshaft * 3.250 in. stroke * Forged 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal Front / External Rear CYLINDER HEADS: * BluePrint aluminum cylinder heads * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners CAM SPECS: * Cam Type: Roller * .495 Intake .502 Exhaust * 220 Intake / 224 Exhaust duration * At .050, 114 degree lobe separation angle IGNITION TIMING: * 32-34 degrees total at 3500 rpm ALSO INCLUDES: * Premium Vintage valve covers * Premium Vintage air cleaner * 6.75 in. harmonic balancer * Spark plugs * Under header spark plug wires (perfect for Rams Horn exhaust manifolds) * Oil pan * Timing cover * Aluminum Intake manifold * Small cap ready-to-run distributor equipped with Tach Drive and coil * Dyno tested and shipped with results * Warranty: 30 month / 50,000 mile NOTES: * Not for use in pollution-controlled vehicles.

Not Yet Reviewed

$8,499.00

Edelbrock E-Force TVS2300 Mustang Stage 2 Track System Supercharger Kits

Edelbrock E-Force TVS2300 Mustang Stage 2 track system supercharger kits will transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS2300 supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the track with the added influence of these E-Force supercharger kits from Edelbrock.

Not Yet Reviewed

$8,204.95

Alcon Pro-System Brake Kits

Alcon offers Pro-System brake kits for a wide range of vehicles, including many Chevrolet Corvettes and Camaros, BMW M3's, and Volkswagen Golf models from the late 1990s and up. These replacements are manufactured from factory-style materials and specifications to ensure proper fit and long-lasting performance. Depending on the front and/or rear kit you select, components may include a vented rotor with slotted surface, aluminum caliper, and semi-metallic brake pads. The brake parts are available in a variety of diameters, thicknesses, and bolt patterns. Order the kit(s) recommended for your application.

Not Yet Reviewed

$5,600.00

—

$6,615.65

Edelbrock E-Force Camaro SS Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.

4.67 out of 5 stars ( 3 )

$8,342.95

—

$8,739.95

KW Variant 4 Coilover Kits

KW Variant 4 coilover kits are developed exclusively for supercars, sports cars, and performance oriented sedans. With coilover struts made from stainless steel or aluminum, depending on the vehicle design, you give your super-sports car the necessary equipment to further increase the driving dynamics in everyday life. The triple-adjustable high performance dampers combine leading race technology to allow the independent adjustment of the rebound and the low-speed and high-speed compression damping. Select the coilover kit designed for your vehicle.

5.0 out of 5 stars ( 1 )

$7,894.00

ATK High Performance GM 540 660 HP Stage 3 Long Block Crate Engines

Smash the competition or terrorize the street with ATK High Performance GM 540 660 hp Stage 3 long block crate engines. They are built around a rock-solid bottom-end and a free-breathing top-end to create a beast that is capable of 660 hp and 690 ft.-lbs. of tire-shredding power. ATK hand-assembles each of these mills out of top-of-the-line components to make them strong enough for the track, but reliable enough for street use, so you get the best of both worlds. ATK GM 540 660 hp Stage 3 crate engines include: * Dart Big M block * High performance aluminum cylinder heads * Intake manifold * Carburetion * 4340 forged steel crankshaft and H-beam connecting rods * Forged pistons * Hydraulic roller camshaft * Cam lift- .640 int./.640 exh. * Cam duration @ 0.50- 243 int./249 exh. * 10.0:1 compression * Distributor, plug wires, plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate

Not Yet Reviewed

$14,998.99

Chevrolet Performance LSX Bowtie Engine Blocks

Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead

5.0 out of 5 stars ( 1 )

$5,038.95

—

$5,565.20

Ford Performance Parts Megazilla Crate Engines

The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Not Yet Reviewed

$23,397.99

BluePrint Engines Marine GM 383 C.I.D. 405 HP Base Stroker Long Block Engines with Cast Components

Do you need a replacement engine for your boat? Try one of these BluePrint Engines marine GM 383 c.i.d. 405 hp stoker long block crate engines to get the job done. They feature quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * SCAT cast iron crankshaft * Keith Black hypereutectic pistons * GM heavy beam connecting rods * Hastings moly rings * Balanced rotating assembly * Melling high-volume oil pump * COMP Cams roller lifter camshaft * Heavy-duty double roller timing set Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Brezinski cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Dyno-tested--and shipped with results

1.0 out of 5 stars ( 1 )

$7,499.00

Edelbrock E-Force Camaro SS Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 TVS supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation that's made in America with these Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.

5.0 out of 5 stars ( 1 )

$7,508.95

Quicksilver Circle Track Crate Engines

Torque wins races. Reliability wins championships. Quicksilver Circle Track crate engines are designed to deliver on both counts. These small-block V8 engines are factory sealed for fair competition and will deliver season after season of reliable racing performance with minimal maintenance, while producing full power on pump gasoline. To comply with popular stock-class racing rules, Quicksilver Circle Track engines are shipped with factory seals on the intake, front cover, oil pan, and cylinder heads. Built with premium quality components, they feature a roller camshaft design and offer the best value for dirt and asphalt Circle Track racing. Order the engine needed for your build. Features: * Durable GM Gen+ remanufactured cast iron blocks -- Cost-effective and durable solution for this application -- Single-piece rear main seal -- 8-bolt 4-barrel aluminum intake manifold -- 6-quart oil pan * Roller camshaft * Hydraulic lifters * Stainless steel valves, hardened valve seats, head gaskets with stainless steel fire rings, and heavy-duty marine valve springs for extended life * 6 in. SFI-approved balancer * For off-road racing only * Shipped with a fresh fill of Quicksilver Performance Racing 25W-40 synthetic blend oil

Not Yet Reviewed

$7,079.99

—

$12,105.99

Edelbrock E-Force Corvette C7 Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force Corvette C7 Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation with these Edelbrock E-Force Corvette C7 Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.

Not Yet Reviewed

$9,051.95

FAST Gen III Hemi Supercharger/Camshaft Power Packages

FAST Gen III Hemi Supercharger/Camshaft Power Packages provided the perfect paring of products for enthusiasts to gain a 1,000+ hp potential from their Dodge. These Power Packages feature Edelbrock's 2650 TVS supercharger with patented, dual-pass, 3-core integrated intercooler, and COMP Cams' LST camshaft designed for supercharger applications. FAST Gen III Hemi Power Packages have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages include: * 2650 TVS supercharger--patented integrated intercooler with 45 percent more cooling area and the ability to generate major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.625 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Phaser limiter * Pushrods * Conical valve springs * Chromoly steel retainers * Valve locks and seals * Spring seats and shims * Installation hardware

Not Yet Reviewed

$9,279.95

Heidts Pro-G Independent Rear Suspension Kits

Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$10,717.00

Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2650 TVS supercharger rotating assembly—a seamless design with minimal elements to eliminate problems and increase airflow. Start your custom-built racer on a winning foundation with an Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner supercharger kit. Order the model with options you prefer. (These systems are for competition racing use only.)

Not Yet Reviewed

$7,931.95

Detroit Speed SpeedRay Front Suspension Packages

Detroit Speed SpeedRay front suspension systems offer a proprietary suspension geometry for superior handling and ride quality. They are available as a 100 percent bolt-on system or with a small amount of fabrication required for a competition coilover option that allows faster spring changes. The system features "Detroit Tuned" quick ratio power rack and pinion steering along with forged Detroit Speed aluminum uprights. The bolt-on powdercoated cradle assembly improves suspension geometry, provides rigid mounting for the rack and pinion, and includes integrated tie down eyelets. DSE/JRi "Detroit Tuned" coilover shocks/springs allow for spring rate tuning and ride height adjustment. Also included are a splined sway bar with aluminum arms, composite bushings, powdercoated tubular upper and lower control arms with Delrin™ bushings, and forged offset upper control arm mounting brackets with caster tuner bushings to optimize suspension geometry and provide clearance for Gen V LT4 engines. Torrington bearings and a spanner tool for easy spring height adjustments complete the kits. Please Note: The body and engine do not need to be removed for installation of the SpeedRay front suspension.

Not Yet Reviewed

$7,830.95

29 Results Found For "COMP"