Free Shipping on Orders Over $125 at Summit Racing

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$23,499.00

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,395.00

—

$8,995.00

RideTech Subframes

Ridetech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put Ridetech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or Shockwaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions

Not Yet Reviewed

$6,495.00

—

$6,645.00

Magnuson Magnum TVS2650R Supercharger Kits

Take your Z06 to the next level with Magnuson's TVS2650 Magnum Supercharger System! Built off of Magnuson's premium Magnum Performance Line, their Corvette Magnum System will give your engine an incredible 76 extra horsepower: 726 hp and 690 ft-lbs at the crank! The system has been designed to fit under the hood of a stock C7 Z06, all while featuring two massive charge air coolers for maximum cooling capability. At Magnuson, they only use the highest quality components in their supercharger kits. Everything you need to supercharge your Corvette is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnum Supercharger on your Corvette!

5.0 out of 5 stars ( 1 )

$7,595.00

BluePrint Engines Ford 347 C.I.D. 415 HP Dressed Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan

4.5 out of 5 stars ( 8 )

$10,799.00

Magnuson Radix TVS1900 Supercharger Kits

Down to the smallest part, the Magnuson line of TVS1900 bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don't lose track of parts in the middle of your installation. All the hardware needed for a full and complete installation is also included so you won't be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step installation manuals will walk you through the install process with exact attention to detail. Magnuson's TVS1900 superchargers utilize EATON's latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson's patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in their TS16949 certified facility – the highest ISO OEM quality certification standard in the market.

3.4 out of 5 stars ( 5 )

$7,195.00

—

$7,595.00

Ford Performance Parts F-150 Supercharger Kits

These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.

5.0 out of 5 stars ( 1 )

$9,752.99

QA1 1988-98 C1500 Front and Rear Coilover Conversion Systems

QA1 1988-98 C1500 front and rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 front control arms and rear torque arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long lasting durability. Topped off with performance ball joints and low-friction, maintenance-free bushings. Complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This kit will add more stability and allows for optimum camber adjustment in a lowered truck. Easily bolt in this system--no welding or bed removal required. Everything needed is included, all the way down to the hardware.

Not Yet Reviewed

$5,597.95

—

$6,879.95

Speedtech Performance USA Pro Touring 1967-69 F-Body Complete Front Subframes

Speedtech Performance USA Pro Touring 1967-69 F-body complete front subframes are designed as bolt-in packages that will elevate your first generation F-body to an entirely new level of performance. They include a specially matched, high-clearance tubular control arm front suspension; double-adjustable coilover shocks; and power steering rack and pinion for the optimum in handling performance and daily drivability. These suspension packages are available for a variety of classic muscle cars from the 1960s. Additional features: * Strong box-type, laser-cut and JIG-welded construction * Reduced weight over factory frames * Factory-alignment holes offer ease of aligning frame to body * Guldstrand mod geometry already built-in * Upper control arm mounts feature additional camber curve adjustability * Increased header and exhaust clearance * Fully adjustable rear crossmember fits all GM transmissions, as well as T-56 and TKO * Built-in tow/tie-down hooks eliminate strapping around painted frames * Accepts most aftermarket suspension components which fit a factory frame--and that clear coilover shocks * Heat-treated tubular 1 1/4 in. sway bar kit * Power rack and pinion unit with steering arms * QA1 double adjustable coilover shocks with thrust washers and adjusting wrench included; allows for 2 1/2 in. of ride height adjustment * Mounting hardware, instructions, and custom alignment specs

5.0 out of 5 stars ( 1 )

$7,211.36

—

$7,452.00

MaxJax M7K Supreme Lift Packages

MaxJax M7K Supreme vehicle lifts enable you to raise up to 7,000 lbs. while retaining a minimal footprint. The unique portable 2-post design offers great versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems. Each Supreme package includes a 2-post car lift, tall adapter pins, frame cradle pads, upright oil drain, and rolling work seat. Built with safety features from the ground up: * Low-pressure HVLP Direct-Drive cylinders eliminate the need for lifting chains or screw mechanisms most commonly found on other lift designs * Hydraulic cylinders feature integrated velocity-fuse safety valves * A robust, gear-type flow divider precisely distributes hydraulic pressure, providing consistent, equalized lifting * Rugged safety lock bars are capable of holding three-times the rated lifting capacity * Arm restraints automatically engage each time the lift is raised * Detailed installation, maintenance and safety instructions accompany each MaxJax car lift Additional features: * Perfect for Advanced Driver Assistance Systems (ADAS) * Pop-Up Bay Ready * Clear undercar access * Portability * Stow to go in less than 15-minutes * Mobile power unit cart * Adjustable lifting arms and stackable adapters * Low-profile arms * Automatic arm restraints * Maintenance-free slide blocks * Single-piece columns * Direct-Drive technology * Industrial-grade hydraulic cylinders * Two lifts in one (optional motorcycle adapter kit allows you to safely lift motorcycles, ATV's or other motorized vehicles to a comfortable working height)

Not Yet Reviewed

$5,140.99

Ridetech 1967-70 GM B-Body Coilover Suspension Systems

Ridetech 1967-70 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These complete kits contain Strongarms, MUSCLEBar sway bars, and HQ Series coilovers, removing the guesswork out of purchasing the right components that will deliver the best performance and ride quality. Features include: * Upper Strongarms--powdercoated black and fully assembled with ball joints, bushing, and cross shafts. They feature corrected ball joint angles and the upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. * Lower Strongarms--double sheer lower mount for increased strength. They are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. * HQ Series coilovers--utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via rebound knob located at the top of the shock for underhood access. * Hyperco springs are used to provide a consistent spring rate that will last a lifetime. * Front MUSCLEBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. * Rear MUSCLEBar allows for fine tuning by sliding the arm on the bar to increase or decrease rate * Rear Strongarms provide added strength to get power to the pavement. R-Joint technology provides smooth operation and reduced roll bind. Lower is double sheer mount for coilovers, locating them in place of the stock springs. Upper arm and panhard bar are adjustable, allowing axle to be centered and pinion angle to be set.

Not Yet Reviewed

$5,330.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$27,799.00

Ridetech 1965-66 GM B-Body Coilover Suspension Systems

Ridetech 1965-66 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. Engineered by Ridetech and wound by Hyperco, the rear coil springs offer the perfect lowered stance. Hyperco springs are CNC cold-wound and machined from high-tensile chrome silicon steel—the highest grade spring material available. Enjoy Ridetech's passionate commitment to finding the perfect spring rate and components for your vehicle in their 1965-66 Chevrolet coilover suspension kits. Features, items, and specs: * For cars with two rear upper control arms, an additional Strongarm is required * Black powdercoated upper Strongarms feature corrected ball joint angles, and are fully assembled with ball joints, bushing, and cross shafts * Upper ball joints moved back to allow for additional caster setting (improves high speed stability and steering feel) * Black powdercoated lower Strongarms feature a double-sheer lower mount for increased strength, and are fully assembled with ball joints, bushing, and cross shafts * Both front coilovers and rear shocks utilize an impact-forged aluminum body and monotube design to allow fine-tuning—and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front shocks for underhood access) * Hyperco springs provide a consistent spring rate that will last a lifetime * Front and rear MUSCLEBars help reduce body roll and include PosiLink endlinks that provide immediate engagement between chassis and control arms * Rear Strongarms provide added strength to help get the power to the pavement * Upper arm and panhard bar utilize R-joint technology to provide smooth operation and reduce roll bind

Not Yet Reviewed

$5,330.00

BD Diesel Performance Automatic Transmissions

BD Diesel Performance automatic transmissions are designed to transfer the power from high-torque modified diesel engines. They feature redesigned clutch packs with 50 percent more holding surface, steel 6-pin planetary gear carriers, and new lube ports added for high-load areas. Shift strategies and pressure circuits are also modified to handle the high-torque applications. BD Diesel transmissions are not rebuilt factory transmissions--they are custom-tailored to work with your modified truck.

3.0 out of 5 stars ( 1 )

$5,894.95

Magnuson Magnum TVS1320 Supercharger Kits

Magnuson TVS1320 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. These TVS1320 systems were developed to be direct bolt-on kits with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The TVS1320 also looks and fits like OEM, almost like it belongs there. With no cutting or welding, it's also easily reverted to stock. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharge your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,495.00

Summit Bucks

Edelbrock E-Force Jeep Wrangler Supercharger Kits

Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy

3.0 out of 5 stars ( 2 )

$6,772.95

—

$8,347.95

Summit Bucks

Edelbrock E-Force FR-S and BRZ Supercharger Kits

Edelbrock E-Force FR-S and BRZ Supercharger kits have finally arrived for your 2.0L equipped FR-S and BRZ. These kits are designed exclusively for the FA20/4U-GSE engine. The unique inverted design features long runners that allow for maximum flow at high rpm, while retaining great daily driving characteristics. The superchargers have been designed from the ground-up and utilize Eaton 1320 TVS rotor assemblies for maximum efficiency in a compact package. As with all Edelbrock E-Force superchargers, these systems feature an efficient high-flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. A large dual pass air-to-water intercooler and heat exchanger cool the incoming air. All of these features help the E-Force supercharger to deliver dramatically improved performance—especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, each supercharger assembly is finished in a durable black powdercoat with red accents for a unique look that will let everyone know your car is E-Force powered! Kits are available with or without tuner. Order the model recommended for your vehicle. Additional product features: * High-flow intake box and filter that allows for twice the airflow * Compact design fits under the stock hood without modification * Supplied with preformed hoses for ease of installation * Bolt-on installation; everything fits right out of the box with no cutting or welding required * Features Eaton Gen VI 1320 TVS rotor assembly—the same high-quality rotors used by many OEM manufacturers * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Includes an EcuTek ProECU Programming Kit with E-Force tune pre-installed * Integrated bypass valve for minimal decrease in fuel economy * 50-state emissions pending with Edelbrock tune * 3-year / 36,000 mile powertrain warranty

4.78 out of 5 stars ( 9 )

$6,187.95

—

$7,350.95

Ridetech 1988-98 Chevy/GMC C1500 Complete Coilover Systems

Ridetech C1500 complete coilover systems include everything needed to create modern drivability with an aggressive stance for the 1988-98 Chevrolet and GMC C1500 trucks. The package contains front upper and lower Strongarm tubular A-arms, front and rear HQ Series coilover shocks, front sway bar, HD drop spindles, and rear wishbone with integrated C-notches. The benefit of a Ridetech complete suspension system is that it removes all the guesswork as to which components to purchase—saving you time and money. Overview of features, specs, and parts: * Ride height is approximately 4 in. lower than stock in the front and 6 in. in the rear (coilovers add adjustability for rebound and ride height) * Front coilover setup includes HQ Series shocks and bolt-on upper shock mounts to allow more ground clearance and maximum suspension travel * HQ Series aluminum body shocks are a monotube design, rebound adjustable, and come with a 1,000,001 mile manufacturer warranty * Upper Strongarm A-arms feature corrected ball joint angles for the lowered ride height, and the length has been altered to create more camber adjustment. Injection-molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. Also includes integrated brake line mounting brackets. * Lower Strongarm A-arms feature a double-sheer lower shock mount for increased strength; the injection-molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. Also included are quality ball joints for a completely bolt-on experience. * Front MUSCLEBar sway bar is included to reduce body roll and includes the Delrin liners to minimize suspension bind * HD drop spindles are used to all the use of a longer stroke shock and improve suspension geometry and bump steer * Bolt-on wishbone system greatly improves traction, handling, and ride quality. Installation does not require welding or major modifications to the bed floor. -- Includes patent-pending R-joint rod ends to eliminate binding and noise -- Wishbone upper link (rather than panhard bar) for zero lateral movement during suspension travel allows extremely tight wheel/tire fitment -- Optimized anti-squat, instant center and pinion angle migration for dramatic improvements in handling and traction -- Bolt-on C-notch reinforces OEM frame rails and features integrated suspension mounts -- Simple installation with minimal OEM rivet removal

Not Yet Reviewed

$6,880.00

QA1 Mopar Front Street Performance Coilover Conversion Systems

QA1 Mopar front street performance coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. QA1 Mopar street performance systems are available with single or double adjustable shocks in kits offering 0 to 2 in. or 2 to 4 in. of drop. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Single-adjustable shocks are recommended for cars used primarily on the street * Double-adjustable coilovers are recommended for consistent drag racing, autocross or road racing * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations

4.33 out of 5 stars ( 3 )

$5,363.95

—

$6,890.95

BendPak 10AP-168 Series 2-Post Lifts

BendPak introduces a game-changing solution for auto repair shops seeking flexibility in installation—the 10AP-168 Series 2-post lifts! As the automotive landscape evolves with advanced technology, it's crucial for auto repair shops to keep pace by equipping themselves with the latest tools and technology. Enter BendPak's revolutionary AP series of two-post lifts, marking a new era in car lift engineering. These lifts are meticulously designed to integrate the best features from existing two-post lift types into an entirely novel concept, catering to extreme use, heavy loads, and operator safety and efficiency. The 10AP-168 delivers everything professionals love about the AP Series in a taller package. Unlike the standard 10AP, this lift offers an enhanced overall height of 168 in., giving taller techs the room, they need to work more effectively. Additional product features and specs: * Premium-grade materials, a cutting-edge design, as well as a 10,000 lb. lifting capacity * Boasting an expandable top beam and innovative BI-METRIC arms, this lift can accommodate virtually any vehicle lifting requirement, whether it's symmetric or asymmetric * Intelligent lift design strikes a balance between simplicity and sophistication, resulting in minimal service and maintenance costs, leading to reduced operating expenses and heightened productivity * Evolutionary Automatic Swing Arm Restraint System (ASARS) stands strong against the forces exerted when vehicles unexpectedly shift during loading or service * Innovative and patented triple-telescoping swing arms redefine lifting precision—unique three-stage design, complete with a patented nesting feature, enables greater retraction and extension (inner sliding arm movement reaches new levels without any hindrance, allowing for precise lifting action with increased efficiency) * Exclusive Low-Pro swing arms are engineered for ultimate versatility—with telescoping channels and a dropped-end pad receiver, these arms excel in servicing lowered chassis-height vehicles to provide easy access to challenging lift points while minimizing the risk of damage to vehicle side skirts, running boards, and ground effects * Height stackable adapters and two-stage spin-up screw pads offers superior vertical pad placement for secure vehicle support—customizable precision with screw pads and adapters achieve impeccable lifting alignment with double-telescoping screw adapters featuring polyurethane pads resistant to gouges and tears * Adaptability of pads ensures level lifting across all conditions—optional 2.5 in. and 5 in. stackable adapters enhance vertical pad placement for precise and secure vehicle support—with a seamless drop-in design, quick and efficient usage is guaranteed, complemented by organized and secure storage on column-mounted racks * BendPak's patented automatic safety lock system is designed for seamless engagement during lift rising and effortless release during descent—this system streamlines operator actions, enhancing overall safety and workflow

Not Yet Reviewed

$6,595.00

Summit Bucks

Edelbrock E-Force Colorado/Canyon Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Colorado/Canyon Stage 1 street-legal supercharger kits are exclusively tailored to boost the performance of your popular midsized truck. If you opted for the "best in class" horsepower of the V6, but wish you had more towing capability and torque, these kits allow you to have the best of both worlds with 340 hp and 303 ft.-lbs. of torque. Each of these E-Force superchargers increases the V6's engine power output by 24 percent and are designed to fit under your stock Colorado/Canyon hood--with no modifications. Special features of these Edelbrock E-Force Stage 1 supercharger kits: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions

4.2 out of 5 stars ( 5 )

$6,152.95

—

$6,939.95

BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos

The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.

Not Yet Reviewed

$26,499.00

Roush 2018-19 5.0L F-150 Phase 1 Supercharger Kits

Roush 2018-19 5.0L F-150 Phase 1 supercharger kits are an industry-leading calibrated systems. Boosting performance to 650 hp for the 2018-19 Ford F-150 5.0L V8, the Roush 2.65L Phase 1 calibrated supercharger kit is part of the TVS (Twin Vortices Series) line of superchargers developed by Roush Performance, raising the bar for performance and reliability. Eaton's TVS technology rotating assembly delivers more power and better fuel economy in a highly-engineered package and is part of the same line that has been used and proven for years in Roush-built Ford Mustangs. The Roush R2650 TVS supercharger is a roots-type positive displacement supercharger that features twin 4-lobe rotors that are twisted 170 degrees. By comparison, the original Eaton supercharger rotating assembly featured three lobes twisted 60 degrees. The fourth lobe and the added twist, provides a long list of benefits including: greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Unlike turbocharging, the Roush R2650 TVS supercharger provides instant throttle response and can generate increased power through the engine's entire power band. Features include: * Features R2650 rotating assembly along with newly-designed, high-flowing front inlet and outlet ports that greatly enhance thermal and volumetric efficiency across the entire rpm range * Custom, all-aluminum high efficiency intercooler and low temperature radiator along with high-capacity degas bottle provides substantial cooling technology * Increased durability with bigger bearings and thicker timing gears * Fuel charging assembly with Roush-designed upper and lower aluminum intake manifolds * Heavy-duty, first sheave FEAD system reduces stress on the engine * Roush Performance calibration included (to be downloaded using the Roush RDT software) * All necessary installation hardware

3.0 out of 5 stars ( 1 )

$8,799.99

Roush 2018-21 5.0L Mustang Phase 2 Supercharger Kits

Roush 2018-21 5.0L Mustang Phase 2 supercharger kits delivers thrilling power, unparalleled performance, and versatility across both manual and automatic transmissions. They build on the enhanced performance of the Phase 1 supercharger system and boosts the stock 5.0L V8 Ford Mustang GT to an astounding 750 hp and 670 lb.-ft. of torque--a gain of 290 hp over the stock engine. The high-capacity, low-temperature radiator provides increased cooling capability and works with Eaton's TVS R2650 technology for greater power output. The larger LTR and upgraded calibration work in harmony to improve cooling and optimize performance, giving drivers extra laps at the track. Additional features: * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * 3-year/36,000 mile limited Roush powertrain warranty included * Includes all necessary installation hardware

Not Yet Reviewed

$8,799.99

157 Results Found For "BLACK"