Availability
Showing In Stock Items. Show All 62 Items.
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,195.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$6,050.00
—
$7,750.00
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,499.99
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$7,096.70
—
$7,416.82
$6,741.86
—
$7,045.98
On Sale
EMAX vertical solo-mounted alternating silent expandable airlink systems meet high-demands with "whisper-quiet" performance. These systems are equipped with an advantageous alternating switch that will allow the units to alternate from one pump to another. The units will pump up to set pressure, then under the next start-up sequence the opposing pump will start, eliminating excessive running and allowing the pumps to cool under heavy loads. Plus, if one pump will not maintain set pressure and is not keeping up with demand, then both units will come on and run until the unit hits the pressure setting, after which it will go back into normal alternating mode. EMAX alternating silent air compressors have many features that make them easy to use, from automatic tank drains to belt tensioners. With EMAX's patented Whisper100 silent air onboard, these low-profile systems add four levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35 percent. Key features: * Alternating switch that will allow the units to alternate from one pump to another * Two low-rpm solid cast iron patented pressure lubricated pumps * Two industrial grade 1750 rpm TEFC motors * Two magnetic starters with relay switch * Two ASME certified vertical tanks * Whisper100 Silent Air system * Re-usable oil filter * Oil pressure gauge
Not Yet Reviewed
$11,340.94
—
$11,446.94
$10,773.89
—
$10,874.59
Baileigh Industrial SH-5214 hydraulic medium-duty metal shears offer dependability and strength, at a great price. With 35 strokes per minute and their rigid, fully welded steel plate construction, the SH-5214 shears will make efficient, accurate cuts every time. Features include: * 52 in. length * 14-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 3 hp motor runs on 220 V single-phase power * Adjustable 24 in. back gauge ensures precise repeatability * Front arm extensions and table guides keep the material square to the blade * Three modes on the operator console: -- Inch mode: Jog the control and ease the blade down to the material -- Single mode: Makes one-cut cycle per foot-pedal push -- Auto mode: Continue cycling as you hold the pedal down * High-carbon chromium blades with four shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life
Not Yet Reviewed
$13,419.00
With a welded steel frame, the Baileigh Industrial SH-5210-HD hydraulic sheet metal shears offer a long lifespan for cutting thick materials for high production, and adjustable blade gap and rake angle ensure quality cuts. Baileigh Industrial SH-5210-HD hydraulic sheet metal shears feature: * 52 in. length * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 7.5 hp motor runs on 220 V 3-phase power * Industrial-grade hydraulic system located in the front for easy fluid changes * 35 to 47 strokes per minute for speedy production * Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction * Manually adjustable 23.62 in. back gauge ensures precise repeatability * Heavy duty table with roller bars slides material into the machine more easily * Side gauges keep the cut at 90 degrees (if you so choose) without you needing to make a guiding line on the material * Switch between three modes as needed: Jog mode to inch the blade down to the material, single cycle mode for one cut for one pedal push, and automatic cycling mode for continuous cutting for production runs * Adjustable rake angle dial makes it easy to fit your material thickness to minimize burr and put less strain on hydraulics * Convenient blade gap adjustment lets you eliminate folding and twisting * Comes standard with high carbon chromium blades * 2-sided upper blades and 4-sided lower blades can be flipped and resharpened as needed, saving money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy * Shadow line creates a reference line on the material so you know exactly where the cut will be * The SH-5210-HD plate shear is covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience
Not Yet Reviewed
$32,899.99
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
On Sale
The BendPak RBJ15000 rolling bridge jacks are made for the HDS-35 four-post lift—which is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can't get to the wheels. BendPak rolling bridge jacks open the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak's exclusive, optional airline kit. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy! Additional product features: * 15,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Three safety-lock positions—raise your jack to three different heights—whatever is most comfortable for you! * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,695.00
$5,245.00
On Sale
FTI Performance 4L80E Level 3 transmissions are built with unbeatable performance and durability. They are 1,000 hp rated, offered in early (1991-97) and late (1997-up) styles, and available as transmission only or in a kit. The kits include transmission, an FTI SRLS4 Series billet torque converter in your selected stall speed, locking filler tube and dipstick, and a case of High Performance ATF. Choose the 4L80E Level 3 transmission or transmission/converter combo in the style needed for your build.
Not Yet Reviewed
$5,745.99
—
$5,995.99
$5,458.69
—
$5,696.19
Up the ante in your truck with the style and performance of BDS Suspension Fox 2.5 Elite coilover lift kits. Designed to improve stance, performance, and capability, kits include everything necessary to set your truck up right with clearance for big tires. Fox 2.5 Elite coilovers include a Dual Speed Compression (DSC) adjuster that allows easy high-speed and low-speed compression tuning for optimal performance in any terrain. Each kit will also include Fox performance rear shocks available in different options, heavy-duty control arms for increased suspension travel, and other matched components to take your truck to the next level. Select the kit designed for your truck.
Not Yet Reviewed
$5,218.69
—
$8,357.54
Icon's entry-level offering, Stage 5 suspension systems improve performance and ride quality with the added lift and wheel travel you desire to tackle everything from rock crawling to high-speed desert running, and then drive home in comfort. Available in several lift heights, the kits include Icon's no-sag dual rate and/or multi-rate coil springs and their rebuildable, revalvable Vehicle-Specific (VS) Aluminum Series shocks or Omega Series 2 shocks with or without remote/piggyback reservoirs. Remote reservoir shocks are great for additional heat dissipation to prevent shock fade during off-road use. Together with other complementing components, these kits give your Jeep the superb ride, precise handling, and clearance to perform its best on and off-road. Choose the Icon Vehicle Dynamics Stage 5 suspension lift kit best suited to your Jeep.
Not Yet Reviewed
$6,094.64
Icon's entry-level offering, Stage 8 suspension systems improve performance and ride quality with the added lift and wheel travel you desire to tackle everything from rock crawling to high-speed desert running, and then drive home in comfort. Available in several lift heights, the kits include Icon's no-sag dual rate and/or multi-rate coil springs and their rebuildable, revalvable Vehicle-Specific (VS) Aluminum Series shocks with remote/piggyback reservoirs. Remote reservoir shocks are great for additional heat dissipation to prevent shock fade during off-road use. Together with other complementing components, these kits give your vehicle the superb ride, precise handling, and clearance to perform its best on and off-road. Choose the Icon Vehicle Dynamics Stage 8 suspension lift kit best suited to your vehicle.
Not Yet Reviewed
$9,344.95
H&S Autoshot HSM 250 Double-Pulse Synergic MIG welders are multi-purpose MIG, TIG, and stick welding units. These compact machines offer three MIG wire feed and torch drives with 28 synergic, synergic single-pulse, or synergic double-pulse programs for steel, aluminum, and silicone bronze welding. They accommodate wire sizes from 0.023-0.045 in.—and are lift-arc DC TIG and electrode welding capable. With 250 amps of power, they're capable of welding all steel and aluminum alloys from 20-gauge to 1/2 in., and they offer twin cylinder racks and dual gas inputs for mixed and 100 percent gases. Operating features include: a digital control panel, infinitely variable output power from 10-250 amps, operator selectable pre and post gas, slow feed, burn back, spot, ramp, slope, frequency, duty, arc length, spool gun, hot start, and arc force. Each kit includes: * Double-pulse synergic inverter power supply * Three dedicated MIG guns * Compact TIG torch with thumb-wheel control and 12 1/2 ft. quick-connect welding cable * 250 amp work clamp with a 10 ft. quick-connect welding cable * 250 amp electrode holder with a 10 ft. quick-connect welding cable * Dual gas regulators * AK-2 torch kit * Spool of steel, aluminum, and silicone bronze wire * V & U drive rolls * Operators manual
( 2 )
$5,141.99
BDS Suspension's leveling kits with Fox 2.5 Performance Elite coilover shocks offer a wide range of upgrade options to increase your truck's ground clearance and suspension travel while making room for larger wheels and tires. These BDS leveling kits are engineered for high performance on and off-road and designed to improve the stance and capability of your truck. Each BDS Suspension leveling kit features heavy construction, steel fabrication, and powdercoated components. Give your truck a level attitude with BDS Suspension leveling kits. Select the kit made for your vehicle.
Not Yet Reviewed
$5,426.90
—
$5,482.49
On Sale
FTI Performance 4L80E Level 2 transmissions are built with unbeatable performance and durability. They are 700 hp rated, offered in early (1991-97) and late (1997-up) styles, and available as transmission only or in a kit. The kits include transmission, an FTI SRLS4 Series billet torque converter in your selected stall speed, locking filler tube and dipstick, and a case of High Performance ATF. Choose the 4L80E Level 2 transmission or transmission/converter combo in the style needed for your build.
Not Yet Reviewed
$5,399.99
—
$5,649.99
$5,129.99
—
$5,367.49
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 59 )
$5,455.99
—
$6,190.99
Baileigh Industrial BS-250M mitering band saws make an ideal single-miter horizontal band saw investment. With a welded steel framework, these metal-mitering band saws offer decades of precision work. They run on 110 V single-phase power—so you can use them practically anywhere. Baileigh BS-250M mitering band saws feature a swivel head that miters up to 60-degrees, plus a cast iron saw head and bow that reduce vibrations and keep the saw accurate. Other product features and specs include: * Accepts a standard 1 in. blade * Angle changes take seconds—and the vise stays in place * Rectangular capacity (90 x 45 degrees): 10.230 x 4.330 in. * Round capacity (90/45/60 degrees): 8.930 x 5.900 x 3.540 in. * Square capacity (90/45/60 degrees): 8.660 x 5.700 x 3.340 in. * Adjustable speed from 66 to 280 fpm for the blade and the material, increasing the blade life and decreasing costs * Patented blade tension device (liquid-filled gauge) makes it easy to check the tension and correct it * Inverter drives the 2 hp motor through a gearbox, so there are no pulleys to adjust or belts to break * (2) operational modes (manual or hydraulic descent) * Manual descent: using the pull-down arm and trigger switch to activate the blade and coolant * Hydraulic descent: for production runs, you can switch the machine over to cut using the pressure you input, causing it to automatically shut down the blade and coolant system when the cut is complete * Powerful coolant pump that washes away metal debris, cools the blade teeth, and lubricates the blade, helping it last longer
Not Yet Reviewed
$5,642.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
