Availability
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty
Not Yet Reviewed
$8,999.00
—
$10,999.00
On Sale
BendPak LR-1000 low-rise lifts are your solution for quick maintenance and increased productivity when servicing today's passenger cars and light trucks. From tire and brake service … to vehicle detailing and body repair, these lifts will facilitate your work on a wide variety of vehicles. Additional facts and specs: * Low-profile height that accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs * Single-point safety release make this lift easy to operate and very safe to use * Dropped crossbar in the center provides added vehicle drive-over clearance. Suspension work, oil changes, wheel and brake service, and detailing are easier than ever * Industrial-grade hydraulic cylinder * Solid rubber lift blocks
Not Yet Reviewed
$5,495.00
$5,195.00
BendPak P-900LT low-mid-rise lifts are heavy-duty. With increased lift capacity of 30 percent over past models, they maintain all the features you love—like the dual-approach design, open-center access, and a hands-free safety check. This is the industry's ultimate pit lift, perfect for quick-lube shops, full auto centers, and home garages. The P-900LT offers a minimal footprint and full access to the wheels and undercarriage. Ramps detach quickly to convert a flush-mount unit to a floor unit. Additional facts and specs: * 9,000 lb. capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick setup
Not Yet Reviewed
$6,995.00
Boost your workshop's efficiency and tackle heavy-duty lifting tasks with the BendPak PCL-18B Low Voltage Mobile Lift Systems. Built for stability, these lift column systems are ideal for various vehicle types and lifting needs and can be used individually or in sets of two, four, six, or eight for versatile lifting options. Select the BendPak PCL-18B Low Voltage Mobile Lift System that is best suited for your specific needs and shop setup. Key features and benefits: * Available in configurations of two, four, six, or eight columns to accommodate heavy-duty trucks and light duty passenger vehicles—offers flexibility to use individual columns or sets for versatile lifting options * Durable, heavy-duty steel construction with powdercoat finish for protection against wear and tear * Heavy-duty steel carriage rollers feature turned, ground and polished axle pins * Single, pair, or Team operation * 208-240V, 3-phase main power system (optional voltages available upon request) * Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle service requirements necessitate specific rise heights * User-friendly controls, ergonomic design, and minimal maintenance requirements * Overload protection and Emergency shut-off switches on each column quickly shut-off power to the lift in the event an unsafe condition is detected by the operator * Multiple automatic safety locks are evenly spaced throughout each column * Separate key lock enclosure on each column * Portable and versatile—no permanent installation needed * Multi-width wheel forks with locking pins accommodate the widest range of wheels, eliminating the need for specialty wheel adapters * Tandem polyurethane-covered steel wheels and pallet-jack style steering wheels for smooth maneuverability * Intuitive controls for easy programming and operation from any column * Smart electronics with self-diagnostics and self-calibration functions for simplified maintenance * Quiet operation—enclosed electric-hydraulic power system ensures quieter operation * Each column is equipped with a warning light and audible alarm for critical warning alerts * Manual safety override valves on each column permit the lift to be lowered in the event of a power outage without the need for manual hand cranks * Compliance with safety standards ensures operator and vehicle safety—meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
Not Yet Reviewed
$31,495.00
—
$93,095.00
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with exciting performance. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer, fuel pump and feed line, 750 cfm carburetor, and front accessory drive * 30 month/50,000 mile warranty
Not Yet Reviewed
$9,949.00
These OTC 12-ton capacity jack stands will not dig or sink into asphalt or sand. OTC manufactures these jack stands out of quality steel to ensure performance. Sold individually.
( 1 )
$17,733.99
BendPak P-9000LTF low-rise open-center pit-style lifts have a lot of lifting potential. With their optional arm extension kit, high-stance trucks and SUVs can be easily serviced. Shops run faster and earn more with one of these lifts at their disposal. A host of clever engineering devices and standard features ensure this car lift will last for many years of valuable service. Additional facts and specs: * 9,000 lb. lifting capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick set-up
Not Yet Reviewed
$6,895.00
Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results
( 60 )
$7,949.00
Summit Bucks
Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 TVS supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation that's made in America with these Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.
( 1 )
$7,508.95
Summit Bucks
Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 3 )
$8,739.95
—
$9,286.95
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$5,016.00
—
$13,332.00
Scott's Hot Rods bolt-on IFS packages are the ultimate improvement to the ride quality and handling to your classic ride. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling while adding the convenience and feedback of rack-and-pinion steering. Designed, manufactured and fabricated in-house ensures precise and accurate fitment. Making the conversion process even easier, the bolt-on version of Scott's IFS packages offer simple installation advantages without sacrificing the factory system. Available in a wide array of ride heights, suspension options, brake configurations and even wheel bolt patterns! Features include: * Bolt-on installation for easy conversion * Stock, mild, or low-ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
Not Yet Reviewed
$5,034.99
—
$13,332.00
Used in place of the wheel and tire for an even more precise setup, the Intercomp Racing RFX Precision Hub Plate Scale System is the industry's first vehicle alignment system with a self-contained wireless scale system. Eliminating the wheels and tires provides easier access for suspension adjustments—as well as removes tire pressure, weight, and size variations. (A variety of hub adaptors are available to fit the most requested applications; blank adaptors are also available separately.) Intercomp Racing's RFX Wireless Precision Hub Plate Scale System is available in a standard or low-profile model. Features include: * 1,500 lb. (700 kg) capacity per scale * 6,000 lb. (2,800 kg) system capacity * Fully Integrated RFX wireless weighing technology * Transmit weight data from the indicator to a mobile device using Bluetooth technology * Weights displayed on RFX wireless indicator and in RaceWeigh software simultaneously * Simulates loaded tire diameter with a 2.88 in. (73mm) * Shielded steel ball bearings increase durability and allow the system to move freely with the suspension to settle without binding * Adjustable toe stance: 18 to 26 in. (460 to 610mm) * Adjustable toe rulers measure relative to hub face in 1/16 in. or 1mm increments * Vertical adjustable rulers allow measurement of camber (inches/mm) * Steel insert accommodates Intercomp's magnetic caster/camber gauge adapter * Reflective stickers increase laser visibility * Compatible with Intercomp caster/camber gauges and turn plates * Stores 100 chassis setups; baseline setup recall * Center of gravity calculation * User-selectable display modes * Target tune feature * View ANY combination of scale pad weight and percentage
Not Yet Reviewed
$9,995.00
Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system
Not Yet Reviewed
$7,152.99
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan
( 1 )
$7,845.00
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 2 )
$6,215.21
QA1 1988-98 C1500 front and rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 front control arms and rear torque arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long lasting durability. Topped off with performance ball joints and low-friction, maintenance-free bushings. Complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This kit will add more stability and allows for optimum camber adjustment in a lowered truck. Easily bolt in this system--no welding or bed removal required. Everything needed is included, all the way down to the hardware.
Not Yet Reviewed
$6,547.95
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
BluePrint Engines Pro Series Chevy LS 376 c.i.d. 495 hp EFI truck long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared for those wanting maximum horsepower and durability. Features, specs, and contents: * 495 hp, 490 ft.-lb., compression ratio 10.7:1 * Cast Iron block with 6-bolt main * Nodular iron crankshaft * Connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal balanced rotating assembly * BluePrint LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.59 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller cam -- .553 intake/.553 exhaust lift -- 218 intake/224 exhaust duration at .050 -- 113-degree lobe separation, 110ICL * L92 truck intake manifold * Fuel injectors and rail * Truck water pump * Truck harmonic balancer * LS low-profile aluminum oil pan * GM-style smart coil packs * Spark plugs and wires * Valve covers * Oil pump * Dipstick
Not Yet Reviewed
$10,949.00
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 4 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp * Up to 550 lb.-ft. of torque * 10 in. custom built, custom stalled, multi-disc forged billet lock-up converter * Stall: 2,600 to 4,500 * Master overhaul kit with Alto hardened steels * Raybestos Gen II Racing frictions * High performance valve body reprogramming kit * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * High-flow filter * Complete Torrington bearing kit * New bushing kit * New reverse band * Carbon fiber wide O.D. band * 300M hardened intermediate shaft * Heat-treated and stress relived input shaft * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Wide reverse drum with mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly with new gears * Updated O.D. servo pin and piston * Updated dual O-ring 3rd accumulator piston * Custom 360-degree adjustable shift linkage arm * Transmission mount
Not Yet Reviewed
$8,095.00
iDEAL Equipment mobile single column lifts are the perfect lift for shops or homeowners with limited space or situations where lift portability is more important than a floor-mounted 2-post lift. The low-profile design and drive-over ramps make vehicle loading possible, while the pallet jack feature allows positioning under the vehicle for loading. The 72 in. lift height allows access under most vehicles making it ideal for pre-service inspections or maintenance, while also providing outer vehicle access around most vehicles for wheel service repairs. Features and benefits: * Lift capacity 6,000 lbs. * Low profile design under 4 ft. * Rigid base construction * Single point locking release * Telescoping 2-stage swing arms * Low profile spin-up lift pads * 2 in. x 4 in. stackable lift pad extensions * 21 locking positions * Durable powdercoat finish
Not Yet Reviewed
$5,610.00
Ranger's CoolCharge A/C recovery and recharging machines make vehicle A/C recovery, recycling and recharging faster and easier than ever! These automatic programmable CoolCharge AC-134 machines are designed to evacuate and recover 95 percent of old coolant and recharges vehicle A/C systems within +/- 0.5 oz. of the desired charge. There's nothing easier than programming the A/C settings, and then walking away to let the Ranger CoolCharge AC-134 machine do its job. Features and specifications: * Meets UL 1963 and SAE J2788 Standards * Refrigerant: R134a * Flushing function for rapid discharge of used coolant * Electric database * Car, truck, SUV, and bus compatibility—Electric/Hybrid vehicles excluded * Automatic oil discharge * Programmable vacuum for faster recharge and recovery * Oil injection: Solenoid/visual * Refrigerant charge: Automatic with electronic scale * A/C Pressure adjustment * Operation record for total convenience—a large display faces upright on the machine and an optional print features lets you provide results for both you and your customers * Automatic CoolCharge is 100 percent programmable, so there's no standing over and babysitting the automated recharge and recovery process—while the machine works, technicians can perform other inspections and truly provide the best possible customer care in your region * Oil that is drained during operation is stored internally in a container, and the simple LCD display will indicate how much needs to be returned to the vehicle system * The filter quality and refrigerant levels are also automatically monitored by the machine—functions will cease in the event the filter is too dirty or the refrigerant level becomes too low to service the vehicle * Massive 12 in. back wheels and lockable 4 in. front casters allow you to easily maneuver the machine virtually anywhere and conveniently lock in place with a foot-activated switch to keep unit stationary while in use * Manual and full auto modes included
Not Yet Reviewed
$5,795.00
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$6,549.00
—
$19,999.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
