Availability
RideTech 1964-66 Mustang air suspension systems are the perfect choice to deliver modern ride quality and handling to your classic muscle car, while providing an ultra-low show stance. (To complete this air suspension system, a RideTech compressor system is required/recommended.) RideTech 1964-66 Mustang air suspension systems include: * Upper StrongArms: feature corrected ball joint angles for the tall spindles (the upper ball joint has been moved back to allow for additional caster setting, which improves high-speed stability and steering feel). Billet cross shafts are included, with a lowered mounting point to increase camber gain and correct suspension geometry; they house a stout double sheer lower shock mount * Lower StrongArms: feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. (Additional caster is designed into the arms, and includes a robust bearing in aluminum housing at the front mount to replace the soft factory rubber units) * TruTurn System: includes tall spindles, which induce more negative camber gain to maximize tire contact patch during cornering (also includes steering arms, center link adapter, tie rods and adjusters—to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires). This spindle is designed for use with 1967-69 Camaro brake systems (compatible with OEM manual steering, and with the Borgenson power steering conversion box). * HQ Series Shockwaves: utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (they also allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access). * Front MuscleBar: helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link: installation does not require any major modifications to the floor pan, and requires only minimal welding to the axle tube; also works with minitubs. The R-joint rod ends combine the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.
Not Yet Reviewed
$8,130.00
Detroit Speed DECAlink independent rear suspension kits feature no compromises and exclusive suspension geometry for superior handling and ride quality. The IRS utilizes modern CV axle shafts and hub bearings, keeping suspension loads from being transmitted through the axle shafts, and works with an original 17-spline differential assembly or a Hammerhead 12-bolt differential. All suspension link lengths are adjustable, and the kits have adjustments for rear anti-squat geometry and roll center height. The suspension points are hard mounted to eliminate stock rubber mounted suspension deflection. The kits are available with base, single adjustable, or double adjustable shocks. Choose your kit. Detroit Speed DECAlink rear kits include: * Forged Detroit Speed aluminum uprights * 2-piece cast aluminum/steel cradle assembly which eases differential housing removal * "Detroit Tuned" coilover shocks/springs that allow spring rate tuning and ride height adjustments * Rear anti-roll bar * Uses OEM cross-axis pivot bushings at all pivot points * Torrington bearings * Spanner tool for easy spring height adjustments Shock choices: * Base shocks are "pure blood pedigree" racing shocks in their most efficient form as a non-adjustable unit, yet they share all the increased dynamic responses of all the JRi adjustable models while providing excellent ride quality on the street * Single-adjustable shocks include all features of base shocks with "Detroit Tuned" valving, plus installed rebound adjustment with the simple turn of a knob, while providing excellent ride quality on the street * Double-adjustable remote canister monotube shocks incorporate a gas charged bladder to provide high-frequency and low-speed dampening control
Not Yet Reviewed
$10,154.95
—
$12,153.95
Detroit Speed QUADRALink rear suspension kits offer 4-link geometry for the best possible handling. These kits are a great way to upgrade from your original leaf spring suspension. They feature Detroit Speed's patented Swivel-Link that allows the suspension to fully articulate with smooth, solid motion and no binding—and it's done without Heim joints! QUADRALink uses tuned high-Durometer rubber bushings, rather than noisy, short-life Heim joints or squeaky urethane bushings. Plus, unlike other kits, these suspensions utilize an adjustable panhard rod that provides precise and effective rear axle lateral location during hard cornering. The long upper links provide great pinion and U-joint angle control, while the rear upper shock crossmember strengthens the rear body and frame section. QUADRALink rear suspension kits are available for a variety of specific vehicle applications; select the model to enhance your ride!
( 1 )
$5,211.95
—
$6,587.95
Build the ultimate Jeep and be ready for any terrain with JKS J-Max Fox Factory Race Series suspension systems. These kits pull out all the stops to offer truly performance driven suspension packages. At each corner of these J-Max lift kits are custom-tuned 10 in. travel Fox 2.5 in. diameter Factory Race Series coilovers with DSC adjustment to provide the ultimate in tuning options. Custom dual rate springs dial-in ride height and the DSC adjusters providing both high- and low-speed compression adjustments. The kits feature J-Flex (flex bushing end) or J-Link (rubber bushing) adjustable control arms to improve strength, off-road performance, and adjustability, plus high-strength bolt-on coilover mounting brackets, an adjustable front track bar, rear track bar brackets, sway bar quicker disconnects, and bump stop extensions. Take your Jeep's off-road performance and strength to the max with JKS J-Max lift kits. Select the kit designed for your Jeep with the preferred control arm bushing option. Fox 2.5 in. Factory Race Series DSC coilovers feature: * High-strength steel body -- Zinc plated for a long-lasting finish -- Front remote reservoir, rear piggyback designs -- Bolt-on brackets -- Improved performance, strength, and tunability * Dual Speed Compression (DSC) Adjuster allows you to easily adjust high- and low-speed dampening control Note: An aftermarket front driveshaft is strongly recommended due to additional travel capability.
Not Yet Reviewed
$6,273.57
—
$6,417.57
JKS J-Krawl MAX Fox 2.5 Factory Race Series DSC coilover systems pull out all the stops to deliver truly performance driven suspension packages. At each corner are custom-tuned Fox 2.5 Factory Race Series coilovers, offering race-proven technology with a larger 2.5 in. diameter body, dual rate springs, and dual-speed compression adjustment for maximum tunability. Packaged along with the coilovers is the heart of the J-Krawl lift kit--a set of J-Flex or J-Link adjustable control arms for improved strength, off-road performance, and adjustability. In addition, these kits contain high-strength bolt-on coilover mounting brackets, an adjustable front track bar, sway bar quicker disconnects, and more to take your Jeep's trail performance and strength to the next level. Select the JKS J-Krawl MAX kit designed for your Jeep. Fox 2.5 in. Factory Race Series DSC coilovers feature: * High-strength steel body -- Zinc plated for a long-lasting finish -- Front remote reservoir, rear piggyback designs -- Bolt-on brackets -- Improved performance, strength, and tunability * Dual Speed Compression (DSC) Adjuster allows you to easily adjust high- and low-speed dampening control Note: An aftermarket front driveshaft is strongly recommended due to additional travel capable.
Not Yet Reviewed
$7,922.50
Turn your Jeep into a serious off road rig with JKS J-Krawl Fox 2.5 Performance Elite Series suspension systems. Designed for maximum articulation and adjustability with added tire and ground clearance, these complete hardcore systems take your Jeep down to its bare frame to make room for an all-new suspension using the factory pick-up points. At the heart of each J-Krawl lift kit is a set of J-Flex or J-Link upper and lower adjustable control arms and sway bar Quicker disconnects providing more strength for trails and extreme rock crawling brawn, along with adjustability to dial in front caster, rear pinion, and overall vehicle wheelbase. In addition to the high-strength adjustable control arms, the J-Krawl systems include dual rate coil springs, adjustable front track bar, rear track bar bracket, and Fox 2.5 Performance Elite Series shocks to maximize travel and performance. Select the kit designed for your Jeep. Fox 2.5 Performance Elite shocks feature: * 2.5 in. diameter bodies -- Impact extruded and CNC-machined 6061-T6 aluminum -- Type III anodized -- Weighs less than steel * External reservoirs -- Increased oil and nitrogen capacity for fade-free operation * Extreme-duty, hard chrome and heat-treated 7/8 in. steel shafts -- Add strength and rigidity * DSC—Dual Speed Compression adjusters -- Dial-in your Jeep's ride -- Adjust stiffness or softness * Race-developed high-flow pistons and proprietary seals * End treatments and components -- Black anodized aluminum
Not Yet Reviewed
$5,631.60
Turn your Jeep into a serious off road rig with JKS J-Krawl Fox 3.0 Factory Race Series suspension systems. Designed for maximum articulation and adjustability with added tire and ground clearance, these complete hardcore systems take your Jeep down to its bare frame to make room for an all-new suspension using the factory pick-up points. At the heart of each J-Krawl lift kit is a set of J-Flex or J-Link upper and lower adjustable control arms and sway bar Quicker disconnects providing more strength for trails and extreme rock crawling brawn, along with adjustability to dial in front caster, rear pinion, and overall vehicle wheelbase. In addition to the high-strength adjustable control arms, the J-Krawl systems include dual rate coil springs, adjustable front track bar, rear track bar bracket, and Fox 3.0 Factory Race Series shocks to maximize travel and performance. Select the kit designed for your Jeep. Fox 3.0 Factory Race Series shocks feature: * 3.0 in. diameter bodies -- Impact extruded and CNC-machined 6061-T6 aluminum -- Type III anodized -- Weighs less than steel -- Resists corrosion * Position-sensitive internal bypass technology -- Plush, predictable ride over normal off-road driving conditions -- Counteract harsh bottom-outs or top-outs * Aluminum-finned remote reservoir -- Recirculating Reservoir Bridge dissipates heat fast for long lasting performance * Extreme-duty, hard chrome and heat-treated 7/8 in. steel shafts -- Add strength and rigidity -- Prevents bending or damage upon impacts * DSC—Dual Speed Compression adjusters -- Dial-in your Jeep's ride -- Adjust stiffness or softness -- Tool-free high- and low-speed compression adjustment * Race-bred high-flow pistons and proprietary seals * End treatments and components -- Anodized aluminum
Not Yet Reviewed
$8,758.55
—
$8,785.55
Do you need a replacement engine for your boat? Try one of these BluePrint Engines marine GM 383 c.i.d. 405 hp stoker long block crate engines to get the job done. They feature quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * SCAT cast iron crankshaft * Keith Black hypereutectic pistons * GM heavy beam connecting rods * Hastings moly rings * Balanced rotating assembly * Melling high-volume oil pump * COMP Cams roller lifter camshaft * Heavy-duty double roller timing set Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Brezinski cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Dyno-tested--and shipped with results
( 1 )
$7,199.00
Launch Tech USA Clear Floor multi-purpose full asymmetric 2-post lifts are height and width adjustable. They can be installed in a standard or rotated column configuration to accommodate the smallest cars to the largest SUVs and front-end heavy pickup trucks. The ALI/ETL certified lifts are available in different weight capacities, runway widths, and colors. Model TLT210-XT specs (10,000 weight capacity): * Adjustable Column Height: Provides an extra 6 in. of height adjustment for ease of installation with various ceiling heights * Adjustable Column Width: Provides extra 6 in. of width adjustment for narrow service bays to custom fit your shop * Rubber Door Guards: Provides added security against door damage * Outer Hose Guards: Protects hydraulic hoses from damage * Stackable Foot Pad Extensions: Extra tall applications are no problem with the two 6 in. tall and two 3 in. short extensions * Single Point Lock Release: Allows technicians to disengage both column locks simultaneously * Heavy-Duty Arm Restraint System: Oversize rugged steel gears, pins, and springs for trouble free operation * Double Telescoping Screw Pads: Used with or without rubber pads, offering 6.5 in. adjustment for complete vehicle coverage
Not Yet Reviewed
$5,372.99
Do you need a replacement engine for your boat? Take control of the water with BluePrint engines marine GM 383 c.i.d. 405 hp Stroker dressed long block crate engines with cast components. They get the job done with quality-built components designed for marine use. BluePrint engines are built for speed on the open water, performance, and reliability, all in one package. Block: * 4-bolt main block * Passenger side dipstick * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * Cast iron crankshaft * Hypereutectic pistons * Heavy beam connecting rods * Moly rings * Balanced rotating assembly * High-volume oil pump * Roller camshaft * Heavy-duty double roller timing set * High performance harmonic balancer Cylinder heads: * Cast iron Vortec heads * Hardened retainers and springs * 2.02 in. swirl-polished intake valves * 1.60 in. swirl-polished exhaust valves * Hardened pushrods * Cast iron marine intake manifold * 9.5 to 1 compression * BluePrint Signature Series polished aluminum valve covers * Rubber coated steel oil pan * Chrome timing chain cover * Long slot rocker arms with positive locking nuts * Mechanical fuel pump * Carburetor with electric choke * Marine billet distributor * High performance coil * Stainless steel fuel line and filter * Spark plug wires and wire looms * Spark plugs * Cast iron circulating water pump * Dyno-tested--and shipped with results
Not Yet Reviewed
$8,449.00
The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MuscleBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower StrongArms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MucleBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)
Not Yet Reviewed
$7,990.00
Variant 3 coilover kits from KW Suspensions feature state-of-the-art technology to customize your ride's stance and look sharp. These coilover systems are designed with shorter INOX-Line stainless steel strut housings for more spring travel, anodized aluminum spring collars for durability, and high-tensile racing springs for strong support and comfort. Their separate and independent compression and rebound damping options allow for a truly individual driving setup. Order the kit recommended for your vehicle.
Not Yet Reviewed
$5,294.00
—
$5,474.00
If you spend more time on the track than on the road, then the KW Club Sport coilover kits are for you. Developed for optimum performance in keeping with motorsports applications for race track and road use, these coilovers feature linear race springs with camber adjustable front top mounts. The coilover kits have stainless steel strut housings, high-quality yellow springs, and purple aluminum components. They were designed with independently adjustable compression and rebound dampers to give you the perfect setup for any race track. Order the kit recommended for your vehicle.
Not Yet Reviewed
$5,294.00
—
$13,694.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
