Availability
Showing In Stock Items. Show All 29 Items.
Bowler Performance GM LS T-56 Magnum 6-speed transmission packages are designed, tested, and built for the aftermarket. The Magnum offers a "no compromise solution" for your hot rod project, and is rated to handle tire blistering torque. Weighing in at 135 lbs., the T-56 features a single rail shifter design, 3-piece synchronizer assemblies, and three shift lever locations. Choose the Magnum model with the gear ratios you prefer. Packages feature: * T-56 Magnum 6-speed transmission * LS aluminum bellhousing * OE LS throwout bearing/hydraulic slave with -4AN inlet and remote bleeder * Flywheel, clutch, bolts * Billet 31-Spline 1350 Series slip yoke * Dial indicator plate for concentric bellhousing alignment * All-in-One harness with reverse lock-out control module * Energy Suspension mount * 4 qts. of Royal Purple Synchromax fluid * 12-month warranty
Not Yet Reviewed
$6,742.99
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 61 )
$5,455.99
—
$6,190.99
Manufacturer Rebate
GearStar Ford 6R80 Level 4 transmissions come with a custom billet Yank Performance lockup torque converter. This is the first of many upgrades that go into making sure that each transmission is built for performance applications to handle up to 750 crank horsepower or 700 crank foot-pounds of torque. These units have a brand-new valve body, brand new pump, billet intermediate shaft, expanded capacity clutches and steels, upgraded transmission cooler bypass valve, several valve body upgrades. They come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every Level 4 transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go! Ford 6R80 Level 4 transmission models are available for 4WD or RWD applications.
Not Yet Reviewed
$9,745.00
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$5,229.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,850.00
—
$6,100.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$6,050.00
—
$7,250.00
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$5,100.00
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
On Sale
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,499.99
$7,819.99
—
$9,309.99
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Building transmissions since 1963, Bowler believes in detail, and each of their Tru-Street automatic transmissions are fully remanufactured (not "rebuilt") by one qualified technician, dyno tested, and then custom packaged for safe shipping. The Tru-Street Series includes torque converter and may include other components, as well. Choose the one you prefer.
Not Yet Reviewed
$5,369.99
When the name of the game is horsepower, you need an FTI Performance TH400 Level 5 transmission to manage it. Rated up to 2,000 hp, these race-prepped, factory-cased, short-shaft units pack one heck of a punch. Each hand-built case includes a billet aluminum forward clutch hub and pro-mod direct drum, a 36-element sprag, and race material clutches. An FTI billet aluminum full manual reverse valve body provides firm shifts, while tough ER310 material input and intermediate shafts hold them all together. The standard deep aluminum pan holds more fluid for improved cooling. Be ready each race day, equipped with an incredibly strong FTI Performance TH400 Level 5 transmission.
Not Yet Reviewed
$5,349.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
