Availability
TeraFlex CRD60 HD axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles, including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas. Tera's exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments, and is compatible with all super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options, carriers, and will accommodate 0 to 6 in. of lift. TeraFlex full-float CRD60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$6,688.99
—
$8,661.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$5,300.00
—
$7,750.00
Clearance
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$9,772.95
—
$9,793.95
TeraFlex Tera44 HD axle housings include front inner axle shafts and TeraFlex HD ball joints, with or without an ARB air locker and a choice of pre-installed ring and pinion gears. They are the perfect replacements for some Jeeps and the ideal upgrade for others. Transfer your existing outer components (stub shafts, unit bearings, knuckle assembly, brakes, sensors) to the new housing to beef up your Jeep with TearFlex Tera44 HD front axle assemblies. Features: * 3.25 in. x 0.5 in. axle tube * UV-protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * HD forged inner knuckles * 5 x 5 in. wheel bolt pattern * Eliminates center axle disconnect * 1-Year/Unlimited Mileage Warranty
Not Yet Reviewed
$5,429.99
Hughes Performance competition transmissions deliver unsurpassed strength and reliability under the most severe conditions. The finest state-of-the-art performance parts are used in Hughes competition units. All internal and external components are inspected and then assembled to exact tolerances, thus ensuring top quality and performance. These transmissions are equipped with reverse-pattern, or, in some cases, forward-pattern valve bodies for sure, solid, quick shifts. They are also equipped with Hughes "Pro III" trans-brake valve bodies. These transmissions are designed with the capacity to withstand pass after pass.
Not Yet Reviewed
$5,834.99
TeraFlex Tera60 HD axle assemblies are perfect for replacing bent, broken or damaged axles in Jeep vehicles including Rubicon models. They can also be used as direct bolt-on upgrades for Jeep owners looking to beef up their stock axles' weak areas, and are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength. These heavy-duty axle assemblies are offered with different gear ratio options and carriers, and will accommodate 0 to 6 in. of lift. Teraflex Tera60 HD axle assemblies feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more!
Not Yet Reviewed
$9,197.99
—
$11,544.99
Hughes Performance Pro Street transmission packages are newly redesigned and built to give you the option to choose the transmission and converter package best suited for your needs. The transmission packages come with everything you need—transmission, torque converter, trans cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or you need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.
Not Yet Reviewed
$5,843.99
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$5,548.99
Hughes Performance Muscle car transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.
( 1 )
$5,673.99
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,979.99
GearStar offers GM 6L80E Level 3 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New pump vanes with hardened rings * Hardened pump rotor * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * Billet single disc converter * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$8,745.00
—
$9,245.00
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 6L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Master overhaul kit with gaskets, seals, rings, and pistons * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity clutch packs using the latest generation friction and steels: -- 3-5 reverse clutch pack -- 1-2-3-4 clutch pack -- 4-5-6 clutch pack -- Low/reverse clutch pack -- 2-6 clutch pack * Updated ACDelco pump cover (stator support) * New ACDelco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body * New ACDelco transmission control module and solenoid body * Hardened and reinforced clutch hubs
Not Yet Reviewed
$9,745.00
—
$10,245.00
GearStar offers GM 6L90E Level 4 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New AC Delco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * 258mm billet triple disc converter * All transmissions are custom-built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that the transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$9,945.00
—
$10,445.00
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
On Sale
FTI Performance 4L80E Level 3 transmissions are built with unbeatable performance and durability. They are 1,000 hp rated, offered in early (1991-97) and late (1997-up) styles, and available as transmission only or in a kit. The kits include transmission, an FTI SRLS4 Series billet torque converter in your selected stall speed, locking filler tube and dipstick, and a case of High Performance ATF. Choose the 4L80E Level 3 transmission or transmission/converter combo in the style needed for your build.
Not Yet Reviewed
$5,745.99
—
$5,995.99
$5,458.69
—
$5,696.19
On Sale
FTI Performance 4L80E Level 2 transmissions are built with unbeatable performance and durability. They are 700 hp rated, offered in early (1991-97) and late (1997-up) styles, and available as transmission only or in a kit. The kits include transmission, an FTI SRLS4 Series billet torque converter in your selected stall speed, locking filler tube and dipstick, and a case of High Performance ATF. Choose the 4L80E Level 2 transmission or transmission/converter combo in the style needed for your build.
Not Yet Reviewed
$5,399.99
—
$5,649.99
$5,129.99
—
$5,367.49
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 59 )
$5,455.99
—
$6,190.99
These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.
Not Yet Reviewed
$5,314.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
