Availability
Showing In Stock Items. Show All 57 Items.
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$5,296.82
—
$7,204.82
The EMAX 3-in-1 air compressor with welder and generator is ran by a 14 hp Kohler Command series engine and a 5 hp two-stage all cast iron pressure lubed pump. These units provide compressed air, three 120 V and 240 V power outlets and a DC 190 amp welder, which makes them ideal for any job site. You can use these 3-in-1 systems in commercial and industrial applications on a jobsite or on the go with the units solid pneumatic tires, or the tires can be removed to make the unit stationary. The two-stage all cast iron pressure lubed pump delivers high cfm output and reliability. The two ASME twin tanks provide 20 gallons of air storage with removable handles, quick disconnects, rubber isolator pads, and liquid filled gauges. The assembly also includes a heavy-duty steel belt guard to make these units ready for any task! In addition, the 3-in-1 compressor units are backed by an EMAX 5-year parts warranty.
Not Yet Reviewed
$5,718.70
EMAX rotary screw compressors distribute the quietest, most dependable air technology with programmable control! Utilizing innovative product design, the highest quality components, and professional workmanship, EMAX compressors provide you with the features you want and the energy efficiency you need, backed by one of the best warranties in the industry. EMAX energy-efficient rotary-screw air compressor features: * State-of-the-art screw air ends have precision-aligned, back-to-back, tapped roller bearings with close tolerances to guarantee long life cycles and outstanding reliability * Each air end is tested to meet consistent high-quality standards * Premium industrial high-efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste-heat output, and less vibration * Drive-Tek design reduces energy demand up to 33 percent * Variable speed soft-start motors provide reduced energy demand and amp-draw on start-up * Spin-Tek design offers unique, easy access to oil filters and air/oil separators—requires no tools to remove/install, saving you time and money * Heavy-duty sound attenuated cabinet provides lower decibel operation than a typical rotary screw * Programmable logistic controller—user-friendly Logika PLC features variable speed control, adjustable pressure range, low oil shutdown, reverse fault, high-voltage fault, over-amp shutdown, hour meter, fault history, maintenance service schedule, air differential control, built-in timer, on-line demand, self-start, and master slave; plus clock and date settings, daily/weekly scheduling, and a built-in light.
Not Yet Reviewed
$8,438.66
—
$15,474.94
Save that energy! When a motor starts at full load voltage it causes a voltage sag on the power system and can cause shock damage creating long-term damage to your motor. EMAX energy-efficient direct-drive rotary screw air compressors have variable frequency drives installed allowing a savings of 25 to 70 percent energy. EMAX energy-efficient direct-drive rotary screw air compressors are built to exacting standards, providing years of dependable service under demanding conditions. And because they use only high-quality OEM components, they offer a full 10-year warranty on the rotary screw pump and a 5-year warranty on the motor and all other components with the purchase of their oil and filters to ensure the correct oil with the specs needed is used for optimal operation. The heart of these compressors are the air ends—the part of the machine that actually compresses the air. EMAX uses only the best German and Finnish name brand air ends that are good for up to 70,000 running hours with only routine maintenance and the correct oil. Also, EMAX uses only premium, high-efficiency industrial motors to run the compressors delivering units with higher service factors, longer bearing lives, lower waste- heat output and less vibration. EMAX direct-drive rotary screw air compressors offer a lot of functionality, including a user-friendly Logika Programmable Logic Controller (PLC) that makes the units bulletproof, and allows easy, intuitive scheduling and operation of the compressor. Key features and benefits: * Ultra-quiet rotary screw operation -- Delivers enhanced reliability with ultimate energy efficiency -- Drive-Tek reduces energy demand up to 33 percent for huge savings -- Continuous 100 percent duty cycle operates at normal conversation level * Premium Industrial TEFC direct-drive motor -- Runs at 1,750 rpm for less wear and tear -- No belt maintenance and longer bearing life for worry-free performance * Variable speed soft start -- Reduces energy demand and amp draw on startup -- Creates less heat to increase compressors lifetime * Precision-engineered rotary air end -- Highly efficient design provides maximum discharge * Advanced Programmable Logistic Controller (PLC) -- Easy-to-use remote with timed start/stop and low oil shutdown -- Monitors maintenance, temperature, oil level, filtration, hours, and much more * Heavy-duty sound attenuated cabinet -- Offers lower decibel rating with easy access to critical components -- Designed for use with stationary air receiver (not included) -- Air receivers can be purchased separately to meet your specific needs * Spin-Tek -- Unique tool-less oil filters and air/oil separators -- Genuine Mann filters reduce air end contamination and harmful elements
Not Yet Reviewed
$38,691.06
—
$84,457.62
Unlock your shop's full potential with BendPak V-Max Elite air compressors. The extreme-duty 4-cylinder pumps are engineered to operate at maximum efficiency under all load conditions. The compressors have rugged 2-stage, 100 percent cast iron pumps that feature splash lubrication and a V-4 finned cylinder configuration. These enhancements result in total reliability and 360 degree cooling. Heavy-duty, disc-type valves are dependable and accessible without even having to remove the cylinder head or other needlessly complicated valve maintenance procedures. A built-in intercooler and air-cooled aftercooler chill the air, reducing both heat and moisture from condensation. The compressors run quiet due to significantly slower pump rpm speeds and energy-efficient pumps. Additional features of BendPak V-Max Elite air compressors: * Cast iron pump and heads * Dual belt drive for less load on bearings * Fully enclosed belt guard * ASME-rated tank * Large surface cooling fins * Oversized ductile iron crankshaft * Tapered roller main bearings * Precision-balanced flywheel * Magnetic starter * Cast iron oil reservoir with large oil drain and sight-gauge glass
Not Yet Reviewed
$5,195.00
—
$7,295.00
Campbell Hausfeld two-stage air compressors are ideal for automotive repair in a shop environment. They are designed for the frequent use of automotive air tools. Their tanks are approved by ASME, the American Society of Mechanical Engineers, for 200 psi maximum pressure, which ensures safe operation.
( 1 )
$5,157.99
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$7,096.70
—
$7,416.82
EMAX vertical solo-mounted alternating silent expandable airlink systems meet high-demands with "whisper-quiet" performance. These systems are equipped with an advantageous alternating switch that will allow the units to alternate from one pump to another. The units will pump up to set pressure, then under the next start-up sequence the opposing pump will start, eliminating excessive running and allowing the pumps to cool under heavy loads. Plus, if one pump will not maintain set pressure and is not keeping up with demand, then both units will come on and run until the unit hits the pressure setting, after which it will go back into normal alternating mode. EMAX alternating silent air compressors have many features that make them easy to use, from automatic tank drains to belt tensioners. With EMAX's patented Whisper100 silent air onboard, these low-profile systems add four levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35 percent. Key features: * Alternating switch that will allow the units to alternate from one pump to another * Two low-rpm solid cast iron patented pressure lubricated pumps * Two industrial grade 1750 rpm TEFC motors * Two magnetic starters with relay switch * Two ASME certified vertical tanks * Whisper100 Silent Air system * Re-usable oil filter * Oil pressure gauge
Not Yet Reviewed
$11,340.94
—
$11,446.94
Looking for a fume extractor that can really remove fumes at a high rate? Introducing the FE-1200 Heavy-Duty Portable Fume Extractor from Baileigh Industrial. Fume extractors are an important part of any welding shop. They help keep the areas clean and the air the workers breathe safe. The FE-1200 is a mobile unit that has many of the features that most shops are looking for. Additional details: * Includes 8 in. x 10 ft. extractor arm * 1.5 hp * 1,110 cfm * 110 V * 3 stage filter: Aluminum mesh; Fire-resistant cartridge filter; HEPA filter * Air pulse cleaning: When flow is restricted, simply shut the machine off, and press the air pulse button (requires 60-90 psi air connection). An internal air tank automatically backflushes the cartridge filter, knocking off accumulated dust and debris (the debris falls into a removable pan for easy cleanout). The extractor can now be turned on and work resumed. * Full steel construction * CSA – U.S. certified * Tool-less filter maintenance
Not Yet Reviewed
$9,576.99
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$8,264.82
—
$9,792.28
OTC's 10-ton air lifts are designed to provide powerful and efficient lifting solutions for heavy vehicles and equipment. They are typically used in automotive and industrial settings for tasks like vehicle maintenance, repair, and tire changes. The air-powered operation reduces the physical effort required for lifting, and the sturdy construction ensures safety and durability for demanding jobs. Whether it's a specialty tool or unique piece of service equipment, OTC provides top solutions to automotive service challenges while increasing technicians' productivity and shop profits. Value is at the core of the OTC tool and equipment portfolio. Key features and benefits: * The OTC 10-ton air lifts are particularly useful for vocational vehicles, bucket trucks, school buses, and other large vehicles, as well as for highway maintenance and service fleets * The robust construction, including features like adjustable lifting saddles and a wide stance for stability, ensure safer lifting operations * Designed to withstand the rigors of heavy-duty use, these lifts are built to last and provide reliable service for extended periods * Air-powered operation allows for quick and effortless lifting, saving time and effort compared to manual jacks * Air lift provides 10-tons of lift at 200 psi air pressure * Adjustable lifting saddles and an extra wide stance for extra stability * Lifting range is 13-inches up to 52 inches * Automatic mechanical safety catch engages in five height positions
Not Yet Reviewed
$7,020.99
Built of fully integrated and welded all-steel plate, Baileigh Industrial SH-5216A air powered metal shears can provide years of service. These air powered sheet metal shears are designed to cut 16-gauge mild steel or lighter, making them a great choice for pro and school workshops alike. Baileigh Industrial SH-5216A air powered metal shears feature: * Cuts up to 52 in. wide sheet metal * Requires only compressed air between 90 and 115 psi (no electrical power needed) * Regulator lets you control the airflow * Can cut at 20 strokes per minute for high production * High-chromium carbon blades have multiple cutting surfaces for extended life between re-sharpening * Oilers make maintenance easy and allow you to keep the machine running smoothly with less friction * Working table offers integrated squaring stops with scale * Includes front and back material supports as well as side guide * Manual rack and pinion back gauge with quick lock and measuring scale help you easily make repeatable cuts * Covered by a 1-year parts manufacturer warranty * Baileigh keeps replacement blades and other parts in stock at their Wisconsin headquarters for fast shipping * Baileigh offers lifetime technical support by phone from their in-house team of knowledgeable representatives
Not Yet Reviewed
$8,169.99
The OTC air/hydraulic powertrain lifts are built to handle heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more! By facilitating easier and safer handling of powertrain components, these air-hydraulic powertrain lifts can contribute to faster, more efficient repairs, potentially saving time and labor costs. Key features and benefits: * Offers several benefits for automotive and other repair applications—designed for safely lifting and maneuvering heavy components like engines, transmissions, fuel tanks, and electric vehicle batteries * Scissors-type design allows access to all four sides of a component * Powered by an air over hydraulic foot pump for precise lifting and lowering control * Independent adjusting screws tilt the table 15 degree side-to-side, or fore-and-aft, and ensure maximum stability of the table in any position * Large, 8 in. swivel casters accommodate heavy loads * Meets ASME PASE standards
Not Yet Reviewed
$7,605.99
OTC's mobile vehicle lift systems have a unique design that provides lift from the tires, not the frame or axle members. They are ideal for situations where limited ground clearance or a lack of clear access complicates lifting. The mobile tandem system is air-operated to handle Class 7 and Class 8 tractor lifting needs. No need to waste time re-blocking and making additional lifts for the clearance you need for under-vehicle service. Roll the system to the vehicle anywhere in the shop or outside on a level surface. Single controller operates both sides of the system for a smooth, level lift up to two full feet from the bottom of the tires to the ground. Units can double as support stands when retention pin is inserted. Value is at the core of OTC's tool and equipment portfolio.
Not Yet Reviewed
$18,747.99
Within Baileigh Industrial's lineup of vertical band saws, the BSV-14VS-V2 metal cutting band saws can increase capacity and add a variable-speed pulley, which makes them a great choice for any shop that cuts a variety of materials, such as aluminum, plastic, mild steel, and chrome alloy. These Baileigh Industrial band saws include everything you need to cut out the center of the material—without having to fix a cut through it! Features of BSV-14VS-VS vertical band saws: * Thick steel plate framework minimizes vibrations to deliver accurate cuts and helps the machine last for many years * 1 hp motor runs on 120 V power * Cast iron table can pivot front to back and left to right * Includes a cast iron mitering system, rip fence, and protractor to make sure your cuts are straight and repeatable * Variable-speed from 110 to 1,200 fpm allows you to adjust the speed for cutting wood, metal, and even plastic * Change the speed with the hand wheel (just turn right for higher speed, left for lower) * Speed scale lets you see the estimated blade speed, so you can choose the right settings for your material and extend blade life * Manual shear lets you cut the blade, so you can run it through the workpiece, then weld it back together * Comes standard with a fully-integrated blade welder with a built-in grinder for finishing the weld joint—great for getting to the center of a cut or repairing blades * Air blowdown system cools the blade and keeps the saw clean from material chips and shavings * Halogen work light lets you see what you're cutting more clearly * Wide 14.17 in. throat depth * 7.08 in. maximum cutting thickness * Accepts standard 1/8 in. to 1/2 in. blades * Covered by a 1-year parts warranty by Baileigh Industrial * Includes lifetime technical support by phone so you can call their team of experienced reps whenever you need help with this metal-cutting band saw
Not Yet Reviewed
$6,465.99
Ranger R76ATR tire changers are versatile time-savers. They have tilt-back towers that allow you to work different tire-and-wheel combos without adjusting the duck head, and the swing-arm design with tower assist ensures stiff sidewalls are never a problem. They are easy to operate and rugged enough to stand up to demanding workloads. The large 30 in. capacity turntable features adjustable, hardened-steel RimGuard wheel clamps, providing an internal clamping capacity of 9 in. to 28 in. and external clamping capacity of 10 in. to 30 in. Features: * Traveling drop-center hold-down device * Inflation system * Inflation gauge and air dump valve * Inflation pressure regulator/limiter * Oiler/lubricator * Air regulator * Bead tool/tire iron * Alloy steel mount/demount head * Nylon mount/demount head * Large soap bucket * Soap brush
Not Yet Reviewed
$7,395.00
OTC 25-ton heavy-duty open throat shop presses enables ram to be positioned outside of press frame for fast axle bearing removal and installation, as well as other tasks. Two models are offered with either an air/hydraulic pump or two-stage hand pump. Features, benefits, and contents: * Press bed is raised or lowered with a hand crank * Spring-return hydraulic ram is laterally adjustable for off-center work at full capacity * Hydraulic ram with 14 in. stroke * Gauge, hose, and pump mounting bracket
Not Yet Reviewed
$8,522.99
Expand the limits of your creative possibility and take your passion to a whole new level with the Powermatic 4224B Lathe with Lamp Kit—the newest member of the industry-leading family of lathes. At over 900 lbs., the 4224B lathe is the biggest, heaviest, and most capable machine Powermatic has ever built. With newly designed, top of its class features, the 4224B Lathe pushes the limits of design, innovation, and durability. Highlights and features: * Motor Power (HP) 3 * Bed construction cast iron * Motor Phase 3 * Recommended circuit size (Amps.) 30 * 15-amp quad receptacle for easy reach of powered accessories * Variable frequency drive allows machine to run on single- or three-phase power * Air nozzle with quick-connect for clearing dust/chips * Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers * Includes two 100-watt task lamps to provide ideal lighting and safety guard * Magnetic-backed moveable control box for versatility and safety * Set of dead centers—which holds a spindle for visual comparison * Sliding headstock with electronic variable-speed * Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes and other equally spaced features * Vacuum system provides quick method of chucking bowl blanks
Not Yet Reviewed
$8,799.00
Tuxedo TC-1300 tire changers are what any high-end race shop needs. The TC-1300's low-profile arm is ideal for run flat and hard side wall tires and features a tilt back column to allow for extra room while working. Now you can change tires quickly with Tuxedo's top-quality tire changers! Product details of the TC-1300 tire changers: * Lever less design allows for user safety and convenience * Tilt back column leaves ample room for operation * Three function assist arm adds versatility in dismounting low-profile tires * Pneumatic locking hex shaft provides reliable and convenient functionality * Powerful dual bead blaster jets on all four clamps * Inflation hose and air gauge
Not Yet Reviewed
$6,446.99
iDEAL 'A-Frame' Open Front Paint Spray Booths are economic, commercial-grade open front units designed to provide optimal 'airflow' with superior lighting for high-quality spray painting and finishing applications. They're a great solution for industrial batch-type and automated production-type finishing systems. Air flows through the open front section of the booth, then passes through the work area toward the rear of booth into the filtered exhaust chamber. Filtered exhaust air is then drawn through the exhaust plenum and discharged upward through the exhaust fan and ducting. The booths are easily installed with heavy-duty, precision-punched 18-gauge panels, allowing for quick nut and bolt assembly. Each booth is standard with a bright white powdercoat finish, deluxe control panel, premium exhaust filters, hinged glass light fixtures, and high-quality tube-axial exhaust fan. Features and specs: * Commercial-grade design for optimal airflow and lighting coverage * Deluxe control panel included * White powdercoat panel finish (inside and outside) * Heavy-duty, precision-punched 18-gauge panel construction * Convenient 5/16 in. bolt and serrated lock nut assembly * UL Listed Dayton 24 in. tube-axial exhaust fan with spark-resistant fan blades * NEMA rated 2 hp, 3 phase, 230/460 V AC 60hz motor standard * Premium AFC exhaust filters * LDPI industrial light fixtures with inside access hinged glass door * (2) LPDI industrial (CLS1 / Div. 2) light fixtures – UL and ETL (Groups A, B, C, and D) * True 'daylight color' with GE T8 48 in. fluorescent lamps 32 watts, 2900 lumens, 5000K * Optimal airflow with CFM 7,983 at .5 static pressure * Inside dimensions: 13 ft. wide x 8 ft. 6 in. high x 7 ft. 6 in. deep * All assembly hardware, manometer, and sealant included * Meets or exceeds all applicable OSHA and HFPA 33 regulations * Easy to install, operate, and maintain
Not Yet Reviewed
$9,050.00
The OTC 55-ton capacity pneumatic/hydraulic heavy-duty shop presses are designed for heavy-duty pressing applications, such as pressing axle bearings, piston pins, and other components. Key features include a side-to-side positioning ram for full capacity pressing along the entire bolster length, a 13 in. stroke hydraulic ram, and a choice of hydraulic power units. The pneumatic/hydraulic operation allows for precise control and ease of use, with a hand crank for adjusting the press bed height. Whether it's a specialty tool that you need or a unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians' productivity and shop profits. Key features and benefits: * Robust steel construction and powdercoat finish ensure long-lasting performance * Press can be used for various tasks, including pressing bearings, bending metal, straightening parts, and more * Side-to-side positioning of ram allows full capacity pressing along entire bolster length without buckling or bending * Includes single-acting ram with 13 in. stroke, air/hydraulic pump, gauge, and hose * The hydraulic system provides the necessary force for pressing, with a 13 in. stroke for flexibility * The pneumatic pump provides a convenient and efficient way to pressurize the hydraulic system, often with foot pedal control * The hand crank allows for easy and precise adjustment of the press bed height
Not Yet Reviewed
$8,522.99
Save time and money with a Ranger combo package. They offer the R980XR tire changer and the DST30P wheel balancer together, equipping your garage with state-of-the-art machines. Here are the features of each piece: Most repair shops service everyday commuter cars, pickups and SUVs. These vehicles have tires and wheels that are relatively easy to work with, so they don't require much in the way of features and add-ons. Such specialty tools are best left for working with aluminum wheels, run-flats, and low-profile tires. Some shops simply want a space-saver that performs basic tire changes quickly and safely. The Ranger R980XR is ideal for such environments. It installs flush against the wall, so it stays out of the way, and the included non-marring duckheads are perfect for a wide variety of wheels. Additional details on the R980XR: * Wheel clamping method (adjustable clamps) * Table clamping system * Bead breaking system * Power assist towers * Tool holder * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Water filter * Oiler / lubricator * Air regulator * Breaker bar * Large soap / lubricator bucket * Brush * Alloy-steel mount/de-mount head * Plastic-polymer mount/de-mount head * Tower design * Bead lifting roller(s) * Upper bead assist roller * Traveling drop-center hold-down device * Inflation restraint device * Bead seating system * Tool tray / bin storage * Motorcycle turntable clamps * Style: Swing arm * 30 in. clamping capacity The Ranger DST30P accurately and efficiently calibrates wheel and tire configurations. Like the DST-2420 wheel balancer, the DST30P handles wheels up to a 30 in. diameter. It also contains many of the same working components as the DST-2420 but with one exception: Ranger took the 64-tooth magnetic transducer encoder from the DST-64T and built it into this smaller unit for minimal yet incredibly precise wheel weight placements. The larger encoder features precision-cut square teeth to convert rotary position to a digital electronic signal, quickly achieving maximum profile and top-dead-center positioning. Additional details on the DST30P: * Dynamic, Static, and Performance Alloy settings * A multi-user save function holds presets to increase productivity * An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times * A simultaneous retrieval of static, dynamic, and ALU1/ALU2 data; identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button * Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors * Low-rpm balancing speed and rapid 6-second cycle time * Automatic braking * Gram/ounce selection and millimeter/inch selection * Automatic round-off with top-dead-center weight position indicator * Manual or automatic start when hood is lowered * Self-calibration function * High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools * Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel adhesive tape weight convenient bulk rolls * Precision-machined, hardened-steel 36mm shaft * Quick-release hub nut for dramatically reduced set-up times * Side-position brake hold wheels at precisely 12 o'clock for proper weight placement * Side cone storage pegs keeps accessories readily available * New "open-side" hood design allows for a broader coverage of tire shapes and sizes * Style: auto and light truck
Not Yet Reviewed
$8,395.00
On Sale
If you're looking to save time, the Ranger R80EX tire machine is a must-have for busy shops. The R80EX tire changers feature a dual-assist, tilt-back tower design, so it's outfitted with the industry's best and most powerful tools. With this equipment, you get the classic rugged reliability Ranger is known for, plus dozens of standard features. A multi-profile traveling drop-center tool, top bead assist rollers, dual lower bead lifting discs and a nylon non-marring wheel restraint device are important tire shop tools designed to dramatically reduce effort, increase safety, and help minimize operator fatigue. If your shop life demands a tool that will generously handle round-the-clock use and abuse, the R80EX delivers! Key features and specifications: * Sealed electronic components for air-tight, dust-free, and contamination-proof protection of terminal leads * Updated electric motor features the best of proven technologies, including rugged copper rotor construction, high-quality bearings, thermal-cool epoxy insulation and durable rolled steel frames * Balanced flywheel helps machine run smoothly, reduces vibration, and helps minimize associated stress on other machinery components * Table clamping system * Dual pneumatic cylinders * Simple foot-pedal control—durable forged steel (instead of cast iron) and features multi-link rod connections for non-binding plunger movement and precise bilateral control * Adjustable RimGuard wheel clamps feature internal/external multi-teeth jaws * Variable clamp positioning makes wheel service simple, perfectly controlling the wheels when clamping them * Adjustable bead loosener system and pneumatic blade—bead loosener control single-lever control on shovel handle * Bi-lateral power-controlled bead loosener features single-lever control on the shovel handle—this ergonomic design eliminates traditional foot-pedal controls that often force technicians into unbalanced working stances when loosening beads * Dual left and right power assist towers * Tower design tilt-back—provides greater clearance and access for tire removal and inflation * Pneumatic-lock tool head stays positioned on the tower return for instant set up for like sets of tires and wheels * Upper bead assist roller * Standard/Dual power-drop * Traveling drop-center hold-down device * Wheel centering tool/Inflation restraint device * Turbo-Blast bead seating system * Tool tray/Bin storage * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Water filter/Oiler/Lubricator * Air regulator * Tire iron/Bead lever tool * Large soap/Lubricator bucket * Brush * Motorcycle turntable clamps (optional)
Not Yet Reviewed
$11,095.00
$10,620.00
On Sale
BendPak 10APX Pro Series 2-post lifts are designed for mechanics who constantly deal with working in uncomfortable positions on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., providing ample room to work comfortably with top-tier equipment. Like the rest of the Pro Series, these powerful units feature a 10,000 lb. lifting capacity, Low-Pro arms, Bi-Metric arms, and more. Pro Series two-post lifts boast a revolutionary design that combines the finest qualities of today's lifts into a new car lift engineering concept. The result is a lift unlike any other, purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency. * Experience the ultimate convenience with the Pro Series, offering both wide and narrow installation options in one customizable package. * Built to last, these versatile lifts ensure durability, safety, and reliability for all your automotive needs. * Improved under-car access thanks to the low-profile arms and extra-wide column spacing. Critical load-holding components are crafted from high tensile-strength steels, allowing greater telescoping movement in swing arms and tube profiles tailored for low ground clearance vehicles and outer-positioned EV lifting points. * Electric vehicles require specialized lifts to safely manage their increased weight from added batteries, reinforced frameworks, suspension systems, and protective metal armor. The Pro Series is designed to meet these demands with reinforced construction and purposefully engineered features, making it the perfect solution for EV service. * The Pro Series boasts a revolutionary Automatic Swing Arm Restraint System (ASARS), designed specifically for heavy vehicle service, setting a new standard in the industry. Engineered to withstand the rigorous pushing and pulling forces encountered during servicing, this system features a complete 360-degree load-holding grip. Its heavily forged-steel design delivers over 2,000 pounds of load-holding force, ensuring secure arm placement and preventing unintended movement during lift use and vehicle servicing. * The Pro Series also introduces revolutionary and patented swing arms tailored for accommodating a wide variety of vehicle lifting points. Unlike traditional lift arms, Pro Series arms retract shorter and extend farther, providing lift operators with extensive positioning options. * BendPak's exclusive Low-Pro swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers. This design facilitates easier access to lift points on lowered chassis-height vehicles, reducing the risk of damage to vehicle side skirts, running boards, or ground effects. * The Bi-Metric adaptable swing arms are another exclusive feature, allowing users to load vehicles symmetrically or asymmetrically without needing to switch arms. * When it comes to lifting full-sized trucks or SUVs onto a two-post lift, you can't cut corners. Reduce your risks with BendPak's Frame Cradle Pads, ensuring your vehicle stays securely in place during every lift operation. The heavy-duty steel and thick polyurethane rubber pad lining provide durability and protection. * For even more functionality, you'll love the BendPak WSA-100 Work Station. This industrial-grade utility station integrates air and electric capabilities into your two-post or four-post lift seamlessly, boosting the efficiency of your shop—with four electrical outlets and two specialized air service outlets, one for lubricating air for tire inflation and another for clean air for pneumatic tools.
Not Yet Reviewed
$7,845.00
$7,445.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
