Availability
Unlock your shop's full potential with BendPak V-Max Elite air compressors. The extreme-duty 4-cylinder pumps are engineered to operate at maximum efficiency under all load conditions. The compressors have rugged 2-stage, 100 percent cast iron pumps that feature splash lubrication and a V-4 finned cylinder configuration. These enhancements result in total reliability and 360 degree cooling. Heavy-duty, disc-type valves are dependable and accessible without even having to remove the cylinder head or other needlessly complicated valve maintenance procedures. A built-in intercooler and air-cooled aftercooler chill the air, reducing both heat and moisture from condensation. The compressors run quiet due to significantly slower pump rpm speeds and energy-efficient pumps. Additional features of BendPak V-Max Elite air compressors: * Cast iron pump and heads * Dual belt drive for less load on bearings * Fully enclosed belt guard * ASME-rated tank * Large surface cooling fins * Oversized ductile iron crankshaft * Tapered roller main bearings * Precision-balanced flywheel * Magnetic starter * Cast iron oil reservoir with large oil drain and sight-gauge glass
Not Yet Reviewed
$5,195.00
—
$7,295.00
iDEAL Equipment EV/Hybrid lift tables are portable, high-rise commercial and industrial grade tables incorporating a "multi-adjustable" EV platform primarily designed to assist with controlled lifting and lowering tasks to safely remove, replace, or service heavy vehicle components, especially for electric and hybrid vehicles, such as EV battery packs, motors, powertrain assemblies, or other similar heavy components. Available as a 2,500 lb. air-hydraulic or a 3,300 lb. 12 VDC battery-powered electric-hydraulic style table, both are equipped with a durable EV insulated platform that includes a multi-directional "sliding" platform with latch clamps, along with tilt and height adjustments. Each one also has their own unique features that combined provide maximum strength, stability, and safety for added efficiency and convenience. Select the iDEAL Equipment EV/Hybrid lift table model you prefer. Additional features and notes: The LT-EV2500AH-X incorporates an exclusive fully operational pneumatic hand operated stainless steel control panel with integrated air gauge and water separator. Also included are high-quality locking swivel and directional poly casters, tool tray, removable hand bar, double lift scissors, HD air-hydraulic pump and hydraulic cylinder, and four rubber pads. The LT-EV3300DC-X incorporates a fully operational remote hand controller and control box panel buttons for dual-control function operations, and includes a high-quality deep-cycle 12 VDC sealed battery, integrated battery charger, and 12 VDC auxiliary outlet port. This table comes standard with a pallet jack dolly with poly casters, leg support stands, front locking swivel and directional poly casters, utility/tool tray, double lift scissors, powerful DC electric motor, dual hydraulic cylinders, and four rubber pads.
Not Yet Reviewed
$6,380.00
—
$8,790.00
iDEAL Equipment powertrain lift tables are portable, high-rise commercial and industrial grade tables incorporating a "multi-adjustable" powertrain platform primarily designed to assist with controlled lifting and lowering tasks to safely remove, replace, or service heavy vehicle components, such as engines, transmissions, drive-axle and transaxle assemblies, or other similar heavy components. Available as a 2,500 lb. air-hydraulic or a 3,300 lb. 12 VDC battery-powered electric-hydraulic style table, both are equipped with a durable powertrain platform that includes extendable length along with tilt and height adjustments. Each one also has their own unique features that combined provide maximum strength, stability, and safety for added efficiency and convenience. Select the iDEAL Equipment powertrain lift table model you prefer. Additional features and notes: The LT-PT2500AH-X incorporates an exclusive fully operational pneumatic hand operated stainless steel control panel with integrated air gauge and water separator. Also included are high-quality locking swivel and directional poly casters, tool tray, removable hand bar, double lift scissors, HD air-hydraulic pump and hydraulic cylinder, tie-down anchors, and a heavy-duty ratchet strap. The LT-PT3300DC-X incorporates a fully operational remote hand controller and control box panel buttons for dual-control function operations, and includes a high-quality deep-cycle 12 VDC sealed battery, integrated battery charger, and 12 VDC auxiliary outlet port. This table comes standard with a pallet jack dolly with poly casters, leg support stands, front locking swivel and directional poly casters, utility/tool tray, double lift scissors, powerful DC electric motor, dual hydraulic cylinders, tie-down anchors, and a heavy-duty ratchet strap.
Not Yet Reviewed
$6,650.00
—
$8,020.00
On Sale
The EMAX 3-in-1 air compressor with welder and generator is ran by a 14 hp Kohler Command series engine and a 5 hp two-stage all cast iron pressure lubed pump. These units provide compressed air, three 120 V and 240 V power outlets and a DC 190 amp welder, which makes them ideal for any job site. You can use these 3-in-1 systems in commercial and industrial applications on a jobsite or on the go with the units solid pneumatic tires, or the tires can be removed to make the unit stationary. The two-stage all cast iron pressure lubed pump delivers high cfm output and reliability. The two ASME twin tanks provide 20 gallons of air storage with removable handles, quick disconnects, rubber isolator pads, and liquid filled gauges. The assembly also includes a heavy-duty steel belt guard to make these units ready for any task! In addition, the 3-in-1 compressor units are backed by an EMAX 5-year parts warranty.
Not Yet Reviewed
$5,718.70
$5,432.76
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$7,096.70
—
$7,416.82
$6,741.86
—
$7,045.98
On Sale
Available in several cfm, voltage, and phase combinations, EMAX piston compressor with dryer bundles take the guess work out of pairing a refrigerated dryer with a compressor. At the core of all EMAX compressors are their durable, quiet pumps. They start with cast iron crankcases and precision-balanced, cast iron crankshafts with stainless steel roller bearings for smooth operation, less drag, and lower energy use. Pump rpm is critical to performance and longevity, so EMAX pumps are over-size and run at lower rpm. They still yield high-cfm outputs and the lower rpm reduces friction and heat. EMAX's raised pump platforms elevate the pump for a constant flow of cool air from the flywheel fan to the underside of the crankcase. The cooler oil pulls heat off the pistons and connecting rods--reducing wear and extending pump life. Other pump features include: * Rebuildable steel connecting rods with replaceable rod bearing inserts * Removable solid cast iron cylinders * Cast iron cylinder heads * Disc intake and exhaust valves, come out of the top of the cylinder heads and can be serviced in minutes * Top-quality compression and oil rings * Precision-ground pistons * Premium non-absorbent gaskets * Cast iron flywheels with built-in fans * Built-in head unloaders reduce internal pump heat under heavy workloads * Integral intercoolers and aftercoolers * Copper main feed line EMAX piston bundle packages include name brand, industrial-grade, 1,750 rpm motors … most competitors use 3,450 rpm motors. With their higher torque factor, 1,750 rpm motors run much cooler with low harmonic distortion, provide significantly more torque for cold weather starting, and require less electricity to start. Higher cfm models use totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulate out of the interior of the motor for worry-free use in dusty commercial and industrial environments. EMAX bundles are equipped with either a pre-wired Condor combination starter and pressure switch, or a pre-wired magnetic starter--necessary for any motor over 15 amps. Under some applications, compressors cycle on and off constantly; causing excess wear on the contacts. EMAX includes a continuous-run feature for workloads over a 50–60 percent duty cycle. With lower workloads, automatic start/stop operation is best. Additional features of EMAX piston compressors include: * Proprietary automatic belt tensioners for easy and quick adjustment * ASME code-compliant air tanks * Automatic tank drains with integrated dual timers * Top-quality, adjustable pressure switches * Brass check valves with PTFE seating * Brass ASME-approved safety valves * Quality plumbing fittings maintain proper sealing * Brass, high-quality ball valves for air receiver * Front-mounted, extended tank water drain pipes with 1/4 in. ball valves * 13-gauge, expanded metal, OSHA-approved belt guards * Taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts drive compressor pumps EMAX air dryers are energy-efficient dryer systems with refrigerated, non-corrosive inner and aftercoolers and stainless steel heat exchangers. They purify compressed air by chilling it to condense moisture; the condensate is drained away carrying oil and dirt with it. The clean, dry, compressed air minimizes maintenance and repairs; it also reduces internal dryer contamination. UL and CSA-approved with an adjustable hot bypass to avoid without freeze-up. Features and benefits of EMAX piston compressor with dryer bundles also include: * Less corrosion of pipes and tools * Avoid splotches and stains * Designed for maximum performance and dryer life * R134 refrigerant * Built-in prefilter with replaceable element * Active coalescing filter with replaceable element * Refrigerant pressure gauge * Outlet air baffle heater
Not Yet Reviewed
$10,384.82
—
$12,497.40
$9,865.58
—
$11,872.53
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
