Availability
Showing In Stock Items. Show All 41 Items.
BluePrint Engines Fuel Injected Ford 408 c.i.d. Stroker engines are complete long block dressed engine assemblies with EFI. They deliver 450 hp and 470 lbs.-ft. of torque. The engines feature a compression ratio of 9.8:1, aluminum heads, hydraulic roller cam, cast steel crankshaft, and forged pistons. Here are additional specifications: BLOCK: * Hand-picked seasoned block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 2-Bolt Main * 4.000 in. Bored * One-Piece Rear Main Seal * Mech fuel pump provision: Not applicable on "CTF" models ROTATING ASSEMBLY: * New cast steel crankshaft * 4.000 in. stroke * Forged I-Beam 6.200 in. connecting rods * Forged pistons * External 28 oz. balance front and rear CYLINDER HEADS: * BluePrint Aluminum Cylinder Heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration at .050 - 114 degree lobe separation IGNITION TIMING: * 34 degrees total at 3500 rpm ALSO INCLUDES: * Intake manifold * Distributor * EFI system * Oil pan, timing cover and valve covers * Dyno tested and shipped with results WARRANTY: * 30 month / 50,000 mile NOTES: * Not for use in pollution controlled vehicles. * Does not include fuel pump. * Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.
Not Yet Reviewed
$9,499.00
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed fuel injected long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * EFI system * Distributor * Valve covers, oil pan, and timing cover * 30-month/50,000-mile warranty
Not Yet Reviewed
$14,349.00
—
$14,499.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 12 )
$5,049.00
For those wanting maximum horsepower and durability that's pretty much ready to go, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp dressed long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 dressed long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer * MSD Pro billet distributor * 950 cfm carburetor * Aluminum intake manifold
( 1 )
$11,199.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 1 )
$9,099.00
The Chevrolet Performance 5.7L 350 HO 333 HP Turnkey long block crate engines are assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec small block ever installed at the factory. Designed, engineered, and tested to stringent Chevrolet specifications, these cast-iron blocks with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50 in. valves. In addition, durable rotating assembly has aluminum pistons that deliver a 9.0:1 compression ratio. Chevrolet Performance pioneered their high-performance crate engine half a century ago—and they have never stopped working to offer enthusiasts new and more powerful solutions for their projects. You've got a dream in your garage. Chevrolet Performance wants to help you bring it to life. Tech Specs: * Engine Type: Chevy Small-Block V-8 * Displacement (cu. in.): 350 * Bore x Stroke (in.): 4.000 x 3.480 * Block: Cast-iron with four-bolt main caps * Crankshaft: Nodular iron * Connecting Rods: powdered-metal steel * Pistons: cast-aluminum * Camshaft Type: hydraulic flat tappet * Camshaft Lift (in.): .435 intake / .460 exhaust * Camshaft Duration (@.050 in.): 212° intake/222° exhaust * Cylinder Heads: Vortec iron; 64-cc chambers * Valve Size (in.): 1.940 intake/1.500 exhaust * Compression Ratio: 9.0:1 nominal * Rocker Arms: stamped steel * Rocker Arm Ratio: 1.5:1 * Water Pump: cast iron, long-style * Flexplate: 12.750 in. * Recommended Fuel: premium pump * Ignition Timing: 32° Total @ 4,000 rpm * Maximum Recommended RPM: 5100 * External balance
( 1 )
$8,634.77
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 2 )
$6,215.21
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
( 2 )
$9,949.00
—
$11,949.00
For those wanting maximum horsepower and durability, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp base long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 base long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer
( 3 )
$10,049.00
Ford Performance Parts has taken their popular 302 based stroker engines and built them into these Ford Performance Parts 363 c.i.d. 500 hp Boss long block crate engines. They accomplished this by maxing out 347 stroker engine blocks with a 4.125 in. bore, giving you 363 cubic inches of Ford power! Ford engineers designed these Z363 engines to work both on the street and the strip with a strong torque curve that delivers over 390 lbs.-ft. of torque from 3,500 to the 6,500 rpm redline. Additional technical specifications: * 500 hp at 6,500 rpm * 450 ft.-lbs. at 5,300 rpm * Boss 302 block with 8.200 in. deck height * 4.125 in. bore x 3.400 in. stroke * Forged steel crankshaft * Forged steel I-beam connecting rods * 10.1:1 compression ratio * Forged pistons with floating wrist pins, * Hydraulic roller camshaft and lifters * Valve lift (in.): 0.580 intake/0.602 exhaust * Duration at .050 in. of lift: 232 intake/240 exhaust * Ford Performance Parts aluminum Z2 cylinder heads * Exhaust port raised 5/8 in.; may require custom headers * 2.05 in. intake and 1.60 in. exhaust valves * Roller rocker arms with 1.65 ratio * Ford Performance Parts cast aluminum valve covers; fit most non-EFI applications * SFI-approved harmonic balancer; may require spacer for pulley alignment * 7-quart high performance oil pan with windage tray and scraper * Available with front or rear sump oil pan and pickup * Aluminum high performance water pump * Internally balanced; use neutral balance flywheel (sold separately) * Ignition timing recommended, 32 degrees BTDC at 4,000 rpm * Maximum recommended rpm: 6,500 * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed; allows use of mechanical fuel pump * Intake manifold not included * Includes intake gaskets and pilot bearing * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor sold separately * Steel distributor gear required * Shipping weight approximately 500 lbs. * Engine power rating based on long tube headers, Edelbrock intake manifold Super Victor with 750 Holley carburetor and 1 in. spacer * Built with currently available parts; photo and specifications may vary
( 1 )
$12,973.50
BluePrint Engines is your premium choice in aftermarket, high-performance, drop-in LS crate engines, and their Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy LS 427 c.i.d. 625 hp EFI fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully Dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 427 stroker GM LS3-style fuel injected engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and a complete front accessory drive system with a polished or black finish. Additional features: * 6-bolt main block * Forged connecting rods * Cylinder head specs: -- 72cc chamber -- 2.165 in. intake/1.600 in. exhaust valves -- 259cc intake/102cc exhaust runners * Camshaft specs: -- .624 intake/.624 exhaust -- 239 intake/255 exhaust duration -- at .050—114-degree lobe separation * ECM supplied with calibration * 87mm LT5 DBW throttle body * Installed accessory drive with A/C, P/S, alternator, belts, and pulleys * LS3 intake manifold * 42# injectors and return-less fuel rail * Harmonic balancer * Valve covers, retro-fit oil pan, and timing cover * Coil packs * All sensors required for engine to run * Spark plug wires and wiring harness * Gas pedal * Dyno test results shipped with engine
Not Yet Reviewed
$17,949.00
You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 385 HP turn-key crate engine. They put out 385 HP and 405 lbs.-ft. of torque for a thrilling feeling of immediate performance. The long block crate engines feature new lightweight aluminum cylinder heads based on the proven Fast Burn design—with large intake runners, and 2 in. diameter intake and 1.55 in. exhaust valves. New beehive-style valve springs enable greater high-rpm performance and durability—as the egg-shaped springs have less reciprocating mass in motion, require less spring pressure for greater valve control, and handle valvetrain stresses more efficiently. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Hypereutectic pistons (9.6:1 compression ratio) * Hydraulic roller camshaft: .474 intake/.510 exhaust lift, 208 intake/221 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 36 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)
Not Yet Reviewed
$12,667.94
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 72 )
$5,151.99
—
$6,554.99
Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm
( 5 )
$16,940.27
Blueprint Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy 632 c.i.d. 815 hp fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that's been fully dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 632 Stroker GM-style drop-in ready engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and complete front accessory drive system with a polished or black finish (your choice). Additional features: * Tall deck with 4-bolt main (approximately .400 taller/wider than OEM block) * Forged H-beam connecting rods * Cylinder head specs: -- 119cc chamber -- 2.30 in. intake / 1.88 in. exhaust valves -- 358cc intake / 125cc exhaust runners * Camshaft specs: -- .698 intake / .698 exhaust -- 272 intake / 282 exhaust duration -- at .050 - 110-degree lobe separation * Installed accessory drive with A/C, P/S, alternator, water pump, belts, and pulleys * Dyno test results shipped with engine
Not Yet Reviewed
$19,149.00
—
$20,399.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
