Availability
Showing In Stock Items. Show All 204 Items.
BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines with fuel injection will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at .050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with Holley Sniper fuel injection system The engines also include an oil pan, a set of valve covers, and a timing cover to finish them off.
( 9 )
$7,549.00
—
$10,049.00
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)
( 1 )
$7,149.00
Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine
( 3 )
$6,549.00
—
$8,949.00
BluePrint Engines Fuel Injected Ford 408 c.i.d. Stroker engines are complete long block dressed engine assemblies with EFI. They deliver 450 hp and 470 lbs.-ft. of torque. The engines feature a compression ratio of 9.8:1, aluminum heads, hydraulic roller cam, cast steel crankshaft, and forged pistons. Here are additional specifications: BLOCK: * Hand-picked seasoned block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 2-Bolt Main * 4.000 in. Bored * One-Piece Rear Main Seal * Mech fuel pump provision: Not applicable on "CTF" models ROTATING ASSEMBLY: * New cast steel crankshaft * 4.000 in. stroke * Forged I-Beam 6.200 in. connecting rods * Forged pistons * External 28 oz. balance front and rear CYLINDER HEADS: * BluePrint Aluminum Cylinder Heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration at .050 - 114 degree lobe separation IGNITION TIMING: * 34 degrees total at 3500 rpm ALSO INCLUDES: * Intake manifold * Distributor * EFI system * Oil pan, timing cover and valve covers * Dyno tested and shipped with results WARRANTY: * 30 month / 50,000 mile NOTES: * Not for use in pollution controlled vehicles. * Does not include fuel pump. * Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.
Not Yet Reviewed
$9,499.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines with fuel injection are available in three models—two with complete front accessory drive systems. All engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum Holley Sniper 2 EFI System Pro Billet Distributor Harmonic balancer Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. -- INCLUDED ONLY ON MODEL BP454CTFKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. -- INCLUDED ONLY ON MODEL BP454CTFK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
Not Yet Reviewed
$10,999.00
BluePrint's Pro Series based dressed GM big block compatible 632 c.i. fuel injected engines are capable of producing 1,015 hp and 830 lb.-ft. of torque. These long block crate engines are fitted with CNC-ported cylinder heads, a solid roller camshaft, forged pistons, and a forged steel crank. BluePrint Pro Series dressed 632s also include intake manifold, Sniper Stealth 4500, distributor, harmonic balancer, spark plug and wires, timing cover, and oil pan. Here's the specs: * Compression Ratio: 10.65:1 * BluePrint Engines high-strength cast iron block -- 4-bolt main -- 4.600 in. bore -- One-piece rear main seal * Rotating assembly -- Forged steel crankshaft -- 4.750 in. stroke -- 6.635 in. connecting rods -- Forged pistons -- Internally balanced front and rear * Cylinder heads -- 95cc chamber -- 440 intake runner -- 2.400 in. intake/1.800 in. exhaust valves * Solid roller camshaft -- .873 intake/.861 exhaust lift -- .293 intake/.304 exhaust duration -- at .050-115 degree lobe separation * Ignition timing controlled by ECU
Not Yet Reviewed
$28,999.00
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed fuel injected long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * EFI system * Distributor * Valve covers, oil pan, and timing cover * 30-month/50,000-mile warranty
Not Yet Reviewed
$14,349.00
—
$14,499.00
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor
( 9 )
$5,699.00
—
$6,749.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$22,699.00
—
$23,049.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$21,249.00
Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed EFI stroker long block crate engines. They are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * Hand-picked, seasoned blocks bored .040 over * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Sniper Fuel Injection * Distributor * Valve covers * Painted oil pan * Brass freeze plugs
( 2 )
$9,409.86
Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
( 1 )
$11,701.99
BluePrint Engines Ford 302 c.i.d. 370 hp dressed long block crate engines feature hand-picked seasoned blocks, align-honed main bearing bore, and cylinders honed on computer-controlled machines to within .0002 straightness/roundness—and sonic tested for thickness. Key features: * 2-bolt main * 1-piece rear main seal * Mechanical fuel pump provision * Upgraded 5.090 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint aluminum cylinder heads with 60cc chambers * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners * Hydraulic roller camshaft: .543 intake/.554 exhaust lift, 218/226 duration at .050 with 112-degree lobe separation * Timing: 10-16 degrees initial, 32-34 total * 600cfm carburetor or Sniper EFI system * Dual plane, satin aluminum intake manifold * Distributor * Valve covers * Timing cover * 50 oz. 6.4 in. diameter harmonic balancer * Dyno test results shipped with engine * Painted Ford blue
Not Yet Reviewed
$8,451.43
BluePrint Engines Pro Series Ford 427 c.i.d. dressed EFI crate engines can deliver 541 hp along with 519 lb.-ft. of torque for your build. These Ford small block-compatible Pro Series base dressed fuel injected long blocks are dyno testing before shipping, and will be accompanied by a comprehensive, dyno-generated printout showing the critical specs, eliminating the question of what your installed engine's real-world peak horsepower and torque ratings are. Specifications: * Compression ratio: 10.0:1 * Block: -- BluePrint Engines high-strength cast iron block -- 4-bolt main -- 4.125 in. bore -- 9.500 in. deck height -- One-piece rear main seal -- Passenger side dipstick * Rotating assembly: -- Forged crankshaft -- 4.000 in. stroke -- Forged 6.2 in. connecting rods -- Forged pistons -- Internally balanced front and rear * Aluminum cylinder heads: -- 62cc chamber -- 2.08 in. intake/1.60 in. exhaust valves -- 205cc intake/70cc exhaust runners * Hydraulic roller camshaft: -- .608 intake/.608 exhaust lift -- 248 degrees intake/258 degrees exhaust duration at .050 in. with 114-degree LSA * Also includes: -- Holley Sniper 2 EFI system -- Single plane intake manifold -- Pro Series distributor -- Valve covers -- Timing cover -- Front or rear sump oil pan -- Harmonic balancer -- Spark plugs and wires
Not Yet Reviewed
$16,799.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and T56 trans combos. Product description and specifications: Block: * High-strength cast iron (LSX style) * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * Chamber – 69cc * 2.165 in. Intake /1.590 in. Exhaust Valves * 259cc Intake / 102cc Exhaust Runners Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other Components: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water Pump * Engine harness and ECU kit * Injectors and Fuel Rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611) not included. Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ rpm stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$22,049.00
BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine
( 28 )
$5,949.00
—
$7,899.00
BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.
( 8 )
$6,649.00
—
$9,049.00
Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher
( 1 )
$38,065.57
BluePrint Engines 350 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover • Aluminum intake manifold * HEI distributor • 600 cfm Carburetor * Dyno tested results shipped with engine
( 18 )
$5,549.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
( 2 )
$9,949.00
BluePrint Engines offers Ford 408 c.i.d. 450 hp Stroker base crate engines—with or without carburetor, distributor, and intake manifold. Here are the basic features and specs: * Horsepower and torque: 450 hp / 470 lbs.-ft. * Compression ratio: 9.8:1 * Hydraulic roller cam * New cast steel crankshaft * Forged pistons * Forged I-beam 6.200 in. connecting rods * Hand-picked seasoned block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 4-bolt main * 4.000 in. bored * One-piece rear main seal * Mech fuel pump provision: Yes * 4.000 in. stroke * External 28 oz. balance front and rear -- CYLINDER HEADS: * Aluminum cylinder heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners -- CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration @ .050 - 114 degree lobe separation -- IGNITION TIMING: * 34 degrees total at 3500 rpm -- ALSO INCLUDES: * Oil pan, dipstick, timing cover and valve covers * Dyno tested and shipped with results * Some models also include carburetor, distributor, and intake manifold
( 1 )
$7,799.00
—
$8,749.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
