Free Shipping on Orders Over $109 at Summit Racing

Heidts Superide Independent Front Suspension Kits

Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$5,213.00

—

$6,154.00

Heidts Superide II Independent Front Suspension Kits

Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs

4.0 out of 5 stars ( 1 )

$5,317.00

—

$5,854.00

Heidts 1970-74 Mopar Challenger and Barracuda PRO-G Independent Front Suspension Kits

Heidts 1970-74 Mopar Challenger and Barracuda PRO-G independent front suspension kits are a comprehensive, bolt-in upgrade designed to replace the stock factory torsion bar suspension with a modern, high-performance, double A-arm front suspension system. Specifically engineered for 1970-1974 E-body vehicles, these kits improve handling and cornering using adjustable coilovers, rack-and-pinion steering, and Wilwood brakes. Key features: * Complete system: Hub-to-hub kit includes a new crossmember, tubular control arms, spindles, and power rack-and-pinion steering * Performance upgrades: Features QA1 adjustable coilover shocks and springs for height and ride tuning * Improved geometry: Designed to eliminate bump steer and allow for significant caster and camber adjustments * Braking: Comes standard with 11 in. Wilwood rotors and 4-piston calipers * Engine fitment: Accommodates Mopar small block, big block, and Gen 3 Hemi engines, usually requiring a rear-sump oil pan * The kit is tailored to bring modern handling capabilities to classic Mopar muscle cars, reducing unsprung weight and increasing overall torsional rigidity

Not Yet Reviewed

$7,623.00

Heidts 1962-67 Nova Superide II Independent Front Suspension Kits

Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$6,154.00

Heidts Pro-G Independent Rear Suspension Kits

Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$7,893.00

—

$15,504.00

Scott's Hot Rods IFS Packages

Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options

5.0 out of 5 stars ( 4 )

$5,398.99

BendPak MDS-6EXT Mid-Rise Open-Center Car Lifts

The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas

Not Yet Reviewed

$8,295.00

Ranger R26FLT Super-Duty Truck Tire Changers

Ranger R26FLT Super-Duty truck tire changers are efficient tools for changing tubeless truck, agricultural, and off-road tires from 14 in. to 26 in. diameter in just minutes. A portable remote control unit allows multiple functions for time-saving convenience. Ranger explored all aspects of truck wheel service to devise the fastest floor-to-floor service, making your job easier and more profitable. The tire changers are built with forged, hardened, and ground components designed to resist scoring, grooving, and wear. This equipment is simple to operate, and engineered for speed and safety. Features include: * Super-duty electric motor and hydraulic drive for superior torque and wheel-holding power * Self-centering hydraulic clamping chuck * Heavy, tapered roller bearings and a dual-direction hydraulic motor provide smooth torque * Quick positioning and locking mount/demount arm * Hydraulic sled carriage for positioning, bead loosening, mounting, and demounting procedures * Single-piece frame for superior rigidity * Hydraulically operated spreader-type jaws ensure secure clamping of virtually all rims and off-road style wheels * Massive chuck spindle handles the heaviest loads * Sturdy spindle, chuck, and mount/demount head hydraulically rotates, raises, and lowers with simple operator controls * Very gentle on over-the-road tires and tubeless tires mounted on aluminum wheels

Not Yet Reviewed

$12,795.00

Speedtech Performance USA ExtReme Front Suspension Packages

Upgrade your front suspension with the Speedtech Performance USA ExtReme subframe featuring forged spindles. These packages are designed to handle all driving conditions with ease—ideal for daily driving, autocross, and track days. The box welded construction and tabbed through frame gusseting provide added torsional rigidity, while the fully adjustable wheel alignment and corrected Ackerman for better grip during cornering facilitate a customizable driving experience. The kit includes custom designed upper and lower control arms, a durable Sweet Mfg. dual power rack and pinion steering, QA1 custom valved single adjustable coilover shocks, and a splined front sway bar with spring rate options. The exclusive ExtReme forged spindles offer optimized geometry and improved KPI/SAI angles, providing increased tire grip and a more precise driving experience. Order the front suspension package recommended for your vehicle. ExtReme Front Subframe Includes: * Full ExtReme subframe * Custom designed upper and lower control arms with high clearance to accommodate wide wheels * Durable Sweet Mfg. dual power rack and pinion steering * QA1 custom valved single adjustable coil over shocks, spring rates of your choice included * Tuned, adjustable, splined front sway bar with spring rate options for street, pro-touring/auto cross and road course * Exclusive ExtReme forged spindles with C7 hubs and maintenance free sealed bearing * Fully adjustable transmission crossmember that will accommodate all engine and transmission combinations ExtReme Front Subframe Features and Benefits: * Boxed construction welded with tabbed through frame and crossmembers for added torsion rigidity * Speedtech Performance chassis and subframes come exclusively with forged 7075 aluminum ExtReme spindles * 78 percent motion ratio for faster shock response and more precise control * Increased shock length providing more suspension travel * Virtually zero bump steer, .005" over the full travel of the system * 30 +/- 3 degree of steering angle * Exclusive system provides optimum Ackerman for up to 20 percent more inside tire grip when cornering * Industry exclusive optimized roll center for low, mid and high travel * 3-piece chromoly tubular splined sway bar standard, optional spring rates * Excellent system for street, autocross and track days * Ride heights to meet your vision for styling the car exactly the way you want it * Accommodates greater than 315/30/18 tire with full steering ExtReme Forged Spindle Features: * Forged from 7075 aircraft-grade aluminum * Optimized geometry unmatched in any other Corvette style spindle * Significantly improved KPI/SAI angle * Requires less caster to achieve maximum tire contact patch * Significantly reduced scrub radius * Billet steering arm provides increased Ackerman angle * Achieves optimum tire slip-angles, increasing front tire grip * Maintains optimum tire grip with less backspaced wheels * Brake caliper bolt pattern is direct carryover from Corvette C5 and C6, opening up many options * Comes standard with a maintenance-free factory GM Corvette C7 hub and sealed bearing * From parking lots to tracks, it simply drives and turns better

Not Yet Reviewed

$9,968.00

Heidts 1964-70 Ford Mustang PRO-G Independent Rear Suspension Kits

Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$14,973.00

BendPak MDS-6EXTF Mid-Rise Open-Center Car Lifts

Using long-wheelbase vehicles as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lifts to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their open-center design, just like their standard length MDS-6LP and MDS-6LPF models. The MDS-6EXTF extended-length, flush-mount, mid-rise lifts provide quick-lube stations looking to install a car lift flush over work pits. If your shop wants to be ready for longer-wheelbase vehicles and minimize the lift's footprint, you can't do better than BendPak's MDS-6EXTF mid-rise open-center car lift. Key features: * 6,000-lb. lifting capacity * Open-center design/flush-mount * Adjustable arm assemblies * Solid-steel safety lock bars * Multiple lock positions * Hinge-point with Zerk grease fittings * Low-profile design * Rubber blocks included * Removable ramps

Not Yet Reviewed

$8,195.00

On Sale

Ranger R76ATR Tire Changers

Ranger R76ATR tire changers are versatile time-savers. They have tilt-back towers that allow you to work different tire-and-wheel combos without adjusting the duck head, and the swing-arm design with tower assist ensures stiff sidewalls are never a problem. They are easy to operate and rugged enough to stand up to demanding workloads. The large 30 in. capacity turntable features adjustable, hardened-steel RimGuard wheel clamps, providing an internal clamping capacity of 9 in. to 28 in. and external clamping capacity of 10 in. to 30 in. Features: * Traveling drop-center hold-down device * Inflation system * Inflation gauge and air dump valve * Inflation pressure regulator/limiter * Oiler/lubricator * Air regulator * Bead tool/tire iron * Alloy steel mount/demount head * Nylon mount/demount head * Large soap bucket * Soap brush

Not Yet Reviewed

$7,395.00

$6,995.00

Heidts 1947-54 Chevy Truck Complete Chassis Kits

Heidts 1947-54 Chevy Truck Complete Chassis Kits come loaded with Heidts' Mustang II independent front suspension and 4-link rear suspension with housing and coilover shocks. The Mustang II suspension features tubular control arms, 11 in. rotors with single-piston GM calipers, stock or drop spindles, steering rack, and shocks and springs. 1947-54 Chevy truck complete chassis kit details: * Brand new 1947-54 Chevy truck frame * Complete Heidts Mustang II independent front suspension with manual rack and pinion * Tubular control arms compatible with coilover shocks * 11 in. solid iron brake rotors, with GM brake calipers and Chevy bolt pattern * Choice of front spring rate with stock shocks (300 lb., 350 lb., or 375 lb.) * Stock spindles * Sway bar * 4-link rear suspension * Rear black coilover shocks with 300 lb. coil springs * 9 in. Ford housing and 31-splin axles

5.0 out of 5 stars ( 1 )

$14,637.00

Heidts 1967-72 Chevy C-10 Complete Chassis Kits

Heidts 1967-72 Chevy C-10 Complete Chassis Kits are the best bang for your buck, if you're looking to replace and upgrade your truck frame. 1967-72 Chevy C-10 complete chassis kit details: * Brand new 1967-72 C-10 frame * Heidts 1967-72 Superide independent front suspension * 1 1/4 in. upper and 1 1/2 in. lower tubular control arms * Front billet single adjustable coilover shocks with 450 lb. coil springs * 11 in. iron rotors with black 4-piston Wilwood calipers and GM bolt pattern * Power rack and pinion steering with 20:1 ratio and 3 Turn-to-Lock * Stock spindles * Heidts 1967-72 C-10 rear 4-link suspension * Rear billet adjustable coilover shocks with 300 lb. coil springs * 64 in. track housing with weld-on brackets and 31-spline axles

Not Yet Reviewed

$20,231.00

—

$28,592.00

Strange Ultra Strut Packages

These Strange Ultra Strut packages are designed for the most demanding Pro and Sportsman racers. They have been developed and track-tested by chassis builders and top racers for over two years. The Strange Ultra Strut packages include a pair of coilover shocks, coilover springs, a lower control arm kit, special wheel races and bearings, a disc brake kit, and aluminum steering arms. A specification sheet must be filled out prior to ordering and a coilover spring rate is required for your application. Please call us at 1-800-230-3030 for further information.

Not Yet Reviewed

$5,396.99

On Sale

Ranger R980XR/DST30P Packages

Save time and money with a Ranger combo package. They offer the R980XR tire changer and the DST30P wheel balancer together, equipping your garage with state-of-the-art machines. Here are the features of each piece: Most repair shops service everyday commuter cars, pickups and SUVs. These vehicles have tires and wheels that are relatively easy to work with, so they don't require much in the way of features and add-ons. Such specialty tools are best left for working with aluminum wheels, run-flats, and low-profile tires. Some shops simply want a space-saver that performs basic tire changes quickly and safely. The Ranger R980XR is ideal for such environments. It installs flush against the wall, so it stays out of the way, and the included non-marring duckheads are perfect for a wide variety of wheels. Additional details on the R980XR: * Wheel clamping method (adjustable clamps) * Table clamping system * Bead breaking system * Power assist towers * Tool holder * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Water filter * Oiler / lubricator * Air regulator * Breaker bar * Large soap / lubricator bucket * Brush * Alloy-steel mount/de-mount head * Plastic-polymer mount/de-mount head * Tower design * Bead lifting roller(s) * Upper bead assist roller * Traveling drop-center hold-down device * Inflation restraint device * Bead seating system * Tool tray / bin storage * Motorcycle turntable clamps * Style: Swing arm * 30 in. clamping capacity The Ranger DST30P accurately and efficiently calibrates wheel and tire configurations. Like the DST-2420 wheel balancer, the DST30P handles wheels up to a 30 in. diameter. It also contains many of the same working components as the DST-2420 but with one exception: Ranger took the 64-tooth magnetic transducer encoder from the DST-64T and built it into this smaller unit for minimal yet incredibly precise wheel weight placements. The larger encoder features precision-cut square teeth to convert rotary position to a digital electronic signal, quickly achieving maximum profile and top-dead-center positioning. Additional details on the DST30P: * Dynamic, Static, and Performance Alloy settings * A multi-user save function holds presets to increase productivity * An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times * A simultaneous retrieval of static, dynamic, and ALU1/ALU2 data; identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button * Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors * Low-rpm balancing speed and rapid 6-second cycle time * Automatic braking * Gram/ounce selection and millimeter/inch selection * Automatic round-off with top-dead-center weight position indicator * Manual or automatic start when hood is lowered * Self-calibration function * High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools * Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel adhesive tape weight convenient bulk rolls * Precision-machined, hardened-steel 36mm shaft * Quick-release hub nut for dramatically reduced set-up times * Side-position brake hold wheels at precisely 12 o'clock for proper weight placement * Side cone storage pegs keeps accessories readily available * New "open-side" hood design allows for a broader coverage of tire shapes and sizes * Style: auto and light truck

Not Yet Reviewed

$8,395.00

$8,195.00

Heidts 1932 Ford Complete Chassis Kits

Heidts' 1932 Ford Complete Chassis Kits come loaded with their Superide® independent front suspension and 4-link rear suspension with housing and coilover shocks. Upgrade to the Superide II IFS with advanced geometry for the ultimate in ride quality! These kits include 11 in. rotors with Wilwood 4-piston calipers, tubular control arms, rack and pinion, adjustable coilovers, and a sway bar. 1932 Ford complete chassis kit details: * Brand new 1932 Ford frame * Tubular control arms * Front billet coilover shocks with 400 lb. coil springs * 11 in. iron rotors, Wilwood 4-piston polished calipers with Ford bolt pattern * Manual rack and pinion steering * Standard spindles * Sway bar * Triangulated rear suspension * Billet rear coilover shocks with 250 lb. coil springs * 32-40 Ford crossmember * 9 in. Ford axle housing with 31-spline axles

Not Yet Reviewed

$17,488.00

Roadster Shop SPEC Chassis Kits

Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel

4.21 out of 5 stars ( 14 )

$13,763.99

—

$15,470.99

BendPak Autostacker PL-6SRX Extra-Wide Parking Lifts

Meet the BendPak Autostacker PL-6SRX, an extra-wide parking lift version of the world's best fully collapsible parking lift. They are the ideal home car lift for tight spaces and garages and also allow homeowners to maintain a clean, modern, and sophisticated look to their garages. Like BendPak's standard-width parking lift model, this extra-wide edition offers a safe, easy way to store two vehicles in a single parking space. Additionally, the PL-6SRX lifts offer a more spacious environment for vehicle loading on the top-level platform. Lower-level vehicles will pull into an equally roomy parking space that is protected by Autostacker's scissor superstructures. Many people who are car collectors are not mechanics, so home parking lifts need to be easy to use. With BendPak's Autostacker PL-6SRX, there are no cables to replace or maintain, and that means zero scheduled maintenance issues, which is a money saver. Key features and specs: * 6,000 lb. lifting capacity * Extra-wide construction for increased door clearance * Key-switch disconnect fully disables operation for enhanced security * Audible alarm and warning buzzer alerts operator and bystanders when the lift is in operation * Accommodates cars, light trucks, and SUVs * Rugged, welded-steel construction is strong and durable * 100 percent hot-dipped, galvanized steel platform * Attractive slate gray, baked-on powder coat finish provides added toughness * Front wheel dish acts as a wheel chock to prevent vehicles from rolling forward or backward * Extra-wide, gradual sloping platform reduces entry ramp height * Automatic safety locks engage at five different parking heights * Simple push-button controls * Dual, direct-drive hydraulic lifting cylinders * Dependable hydraulic circuit that provides precise, equalized lifting * Variable height parking accommodates a wide range of vehicle and ceiling heights * Contoured scissor legs provide rigidity, decreased deflection, and a low collapsed height * Full-width, straight-through axles increase overall stability and tracking through the vertical travel range * Full-width pivot pins promote straighter tracking of the scissor legs throughout travel—vital for eccentric loads * Extra-wide, heavy-duty steel scissor arms with cross member bracing enhance stability * Unique clevis-design scissor ends lower stress and increase rigidity by distributing loads symmetrically over the pins * Patented asymmetric scissor arms provide greater underside door clearance * Patented door-sentry car door protectors are made from energy-absorbing rubber to protect against accidental scratches or door dings * Space-saving design is perfect for commercial or residential applications * Hydraulic safety valves (velocity fuses) prevent sudden, unexpected platform collapse in the unlikely event of hydraulic system failure * UL Listed: electrical components meet National Electrical Code (NEC) requirements

Not Yet Reviewed

$14,195.00

Heidts 1955-59 Chevy Truck Complete Chassis Kits

Heidts 1955-59 Chevy Truck Complete Chassis Kits come loaded with the Superide II independent front suspension and 4-link rear suspension with housing and coilover shocks. The IFS system out-handles the competition with advanced geometry for the ultimate in ride quality. Superide II kits include 11 in.; rotors with Wilwood 4-piston calipers; tubular control arms; power rack and pinion; adjustable coilovers; and a sway bar. 1955-59 Chevy truck complete chassis kit details: * Heidts Superide® II independent front suspension * Tubular control arms * 11 in. iron rotors, Wlwood 4-piston black brake calipers * GM bolt pattern * Front billet coilover shocks with 400 lb. coil springs * Power rack and pinion steering * Stock spindles * Sway bar * Rear 4-Link suspension with weld-on panhard bar mount * Rear coilover shocks with 300 lb. coil springs * 9 in. Ford axle housing with 31-spline axles

Not Yet Reviewed

$16,310.00

20 Results Found For "arms"