Free Shipping on Orders Over $109 at Summit Racing

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$5,025.00

—

$5,025.95

BendPak Add-On Shared Column and Platform 2-Post Parking Lifts

The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations. Product specs and advantages: * Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required * Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work * Ganged column design allows multiple installations in minimum space * Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg) * Galvanized and corrugated anti-slip platform * Freestanding design when ganged two or wide * Overhead power unit provides smooth quiet hydraulic operation * Platform can be stopped at different heights to fit various vehicles and ceiling heights * Full-width channel-locked center panels protect lower vehicle * Wide deck platform accommodates pickups, vans, and cars * Dual direct-drive hydraulic cylinders * Automatic safety lock combined with anti-fall device to hold platform securely * Virtually maintenance-free composite carriage bearings * Electric key switch for security and safety * Automatic shut-off when operator releases key switch * Manual lock release available in case electricity failure (optional) * Hydraulic overloading protection * Photocell sensor prohibits lift to be lowered if vehicle is parked below Safety features: * Mechanical safety locks are spaced every 4 inches * 24 V operator controls and lock release * Photocell sensor prohibits lift to be lowered if vehicle is parked below * Electric protection for power overload or improper voltage * Automatic locking system during power outage * Emergency stop button * Upper limit switch * Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting * Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

Not Yet Reviewed

$9,395.00

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$5,725.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$5,805.99

—

$7,012.99

Brodix Cylinder Heads Aluminum Big Block Chevy Engine Blocks

Brodix Cylinder Heads aluminum big block Chevy engine blocks feature Brodix's proprietary A-356 virgin aluminum that is designed to ensure the maximum potential for strength and repairability. They are manufactured right here in the USA, are oil-restricted from the front, and can be machined for roller camshaft bearings. They feature the strongest main webbing in the business, 1044 steel billet main caps, splayed center main caps, and accept both standard and stroker oil pans. These Brodix aluminum engine blocks are also available with a standard or raised camshaft location, and have 1/4 in. thick registers to allow for bore sizes, up to a whopping 4.625 in. Specify the deck height and cam location before ordering. Let Brodix satisfy your high performance, high-horsepower needs with one of these fabulous aluminum big block Chevy engine blocks.

Not Yet Reviewed

$6,669.99

—

$7,682.99

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$8,394.60

GearStar GM 200-4R Level 2 Transmissions

GearStar offers Level 2, 3, and 4 GM 200-4R performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar GM 200-4R Level 2 transmissions deliver improved performance, a straightforward installation, and a surprisingly affordable price tag. A great replacement for an older 2-speed Powerglide or a 3-speed Turbo Hydra-Matic, you don't have to make major adjustments, plus the fourth gear lets the engine rotate at a lower rpm, reducing fuel consumption and wear and tear on the drivetrain. You can also change the larger rear axle ratios without affecting street-ability. Features and specs: * 400 hp and up to 400 lb.-ft. of torque * Stall: 1,800 to 2,400 * Master overhaul kit with high-energy frictions and new steel plates * Wide carbon fiber intermediate band * Transgo recalibration shift kit * New valve body separator plate * Original equipment-style filter * High-capacity servo * New Torrington bearings * Bushing kit * Thrust washer kit * High-capacity 10-vane pump assembly with new rotor and slide * Hardened stator shaft * New vanes and hardened rings * 0.500 boost valve * Updated pressure regulator valve * Extra-capacity direct drum assembly * Hardened sun shell * Reinforced forward drum assembly * New speedometer drive gear * New speedometer driven gear * Vacuum lock-up system * Installation kit: -- Universal fill tube and stick -- Universal throttle valve pressure cable -- Universal transmission mount -- Universal converter cover (plastic)

Not Yet Reviewed

$6,745.00

Brodix Cylinder Heads Aluminum Small Block Chevy Engine Blocks

Brodix aluminum small block Chevy engine blocks are the strongest and most versatile in the industry. Features include: * Proprietary A-356 virgin aluminum * Strongest main webbing in the business * Available raised camshaft location * Standard billet steel main caps * Optional deck heights available * Optional camshaft bearing styles * 100 percent CNC-machined in-house * Optional lightening packages available

5.0 out of 5 stars ( 2 )

$5,452.99

—

$7,413.99

GearStar GM 6L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 6L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Master overhaul kit with gaskets, seals, rings, and pistons * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity clutch packs using the latest generation friction and steels: -- 3-5 reverse clutch pack -- 1-2-3-4 clutch pack -- 4-5-6 clutch pack -- Low/reverse clutch pack -- 2-6 clutch pack * Updated ACDelco pump cover (stator support) * New ACDelco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body * New ACDelco transmission control module and solenoid body * Hardened and reinforced clutch hubs

Not Yet Reviewed

$9,745.00

—

$10,245.00

Ranger R26FLT Super-Duty Truck Tire Changers

Ranger R26FLT Super-Duty truck tire changers are efficient tools for changing tubeless truck, agricultural, and off-road tires from 14 in. to 26 in. diameter in just minutes. A portable remote control unit allows multiple functions for time-saving convenience. Ranger explored all aspects of truck wheel service to devise the fastest floor-to-floor service, making your job easier and more profitable. The tire changers are built with forged, hardened, and ground components designed to resist scoring, grooving, and wear. This equipment is simple to operate, and engineered for speed and safety. Features include: * Super-duty electric motor and hydraulic drive for superior torque and wheel-holding power * Self-centering hydraulic clamping chuck * Heavy, tapered roller bearings and a dual-direction hydraulic motor provide smooth torque * Quick positioning and locking mount/demount arm * Hydraulic sled carriage for positioning, bead loosening, mounting, and demounting procedures * Single-piece frame for superior rigidity * Hydraulically operated spreader-type jaws ensure secure clamping of virtually all rims and off-road style wheels * Massive chuck spindle handles the heaviest loads * Sturdy spindle, chuck, and mount/demount head hydraulically rotates, raises, and lowers with simple operator controls * Very gentle on over-the-road tires and tubeless tires mounted on aluminum wheels

Not Yet Reviewed

$12,795.00

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$5,026.99

—

$5,696.99

Speedtech Performance USA ExtReme Front Suspension Packages

Upgrade your front suspension with the Speedtech Performance USA ExtReme subframe featuring forged spindles. These packages are designed to handle all driving conditions with ease—ideal for daily driving, autocross, and track days. The box welded construction and tabbed through frame gusseting provide added torsional rigidity, while the fully adjustable wheel alignment and corrected Ackerman for better grip during cornering facilitate a customizable driving experience. The kit includes custom designed upper and lower control arms, a durable Sweet Mfg. dual power rack and pinion steering, QA1 custom valved single adjustable coilover shocks, and a splined front sway bar with spring rate options. The exclusive ExtReme forged spindles offer optimized geometry and improved KPI/SAI angles, providing increased tire grip and a more precise driving experience. Order the front suspension package recommended for your vehicle. ExtReme Front Subframe Includes: * Full ExtReme subframe * Custom designed upper and lower control arms with high clearance to accommodate wide wheels * Durable Sweet Mfg. dual power rack and pinion steering * QA1 custom valved single adjustable coil over shocks, spring rates of your choice included * Tuned, adjustable, splined front sway bar with spring rate options for street, pro-touring/auto cross and road course * Exclusive ExtReme forged spindles with C7 hubs and maintenance free sealed bearing * Fully adjustable transmission crossmember that will accommodate all engine and transmission combinations ExtReme Front Subframe Features and Benefits: * Boxed construction welded with tabbed through frame and crossmembers for added torsion rigidity * Speedtech Performance chassis and subframes come exclusively with forged 7075 aluminum ExtReme spindles * 78 percent motion ratio for faster shock response and more precise control * Increased shock length providing more suspension travel * Virtually zero bump steer, .005" over the full travel of the system * 30 +/- 3 degree of steering angle * Exclusive system provides optimum Ackerman for up to 20 percent more inside tire grip when cornering * Industry exclusive optimized roll center for low, mid and high travel * 3-piece chromoly tubular splined sway bar standard, optional spring rates * Excellent system for street, autocross and track days * Ride heights to meet your vision for styling the car exactly the way you want it * Accommodates greater than 315/30/18 tire with full steering ExtReme Forged Spindle Features: * Forged from 7075 aircraft-grade aluminum * Optimized geometry unmatched in any other Corvette style spindle * Significantly improved KPI/SAI angle * Requires less caster to achieve maximum tire contact patch * Significantly reduced scrub radius * Billet steering arm provides increased Ackerman angle * Achieves optimum tire slip-angles, increasing front tire grip * Maintains optimum tire grip with less backspaced wheels * Brake caliper bolt pattern is direct carryover from Corvette C5 and C6, opening up many options * Comes standard with a maintenance-free factory GM Corvette C7 hub and sealed bearing * From parking lots to tracks, it simply drives and turns better

Not Yet Reviewed

$9,968.00

GearStar GM 6L90E Level 4 Transmissions

GearStar offers GM 6L90E Level 4 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New AC Delco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * 258mm billet triple disc converter * All transmissions are custom-built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that the transmission and converter package are in perfect operating condition before they leave the GearStar facility.

Not Yet Reviewed

$9,945.00

—

$10,445.00

GearStar GM 6L90E Level 3 Transmissions

GearStar GM 6L90E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance and durability but longevity as well. These units come programmed with a VIN number that will work with most aftermarket transmission controllers. If this is going into a stock application, GearStar has the ability to program the transmission with your VIN number to ensure it's a direct replacement. The next upgrades for this transmission are expanded capacity performance clutch packs. Level 3 transmissions come with all new electrics, including the wiring harness, internal computer, all sensors and solenoids—along with all new bushings, bearings, and seals. To help with durability and performance, the transmissions come with a billet pump rotor, billet 4-5-6 clutch hub, hardened and reinforced clutch hubs, and a hardened rear planetary gear assembly. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the transmission, which means the break-in procedure has been done and they're ready to go!

Not Yet Reviewed

$8,945.00

—

$9,445.00

Strange Ultra Strut Packages

These Strange Ultra Strut packages are designed for the most demanding Pro and Sportsman racers. They have been developed and track-tested by chassis builders and top racers for over two years. The Strange Ultra Strut packages include a pair of coilover shocks, coilover springs, a lower control arm kit, special wheel races and bearings, a disc brake kit, and aluminum steering arms. A specification sheet must be filled out prior to ordering and a coilover spring rate is required for your application. Please call us at 1-800-230-3030 for further information.

Not Yet Reviewed

$5,396.99

GearStar GM 6L80E Level 3 Transmissions

GearStar offers GM 6L80E Level 3 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New pump vanes with hardened rings * Hardened pump rotor * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * Billet single disc converter * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.

Not Yet Reviewed

$8,745.00

—

$9,245.00

Ranger R80EX Tire Changers

If you're looking to save time, the Ranger R80EX tire machine is a must-have for busy shops. The R80EX tire changers feature a dual-assist, tilt-back tower design, so it's outfitted with the industry's best and most powerful tools. With this equipment, you get the classic rugged reliability Ranger is known for, plus dozens of standard features. A multi-profile traveling drop-center tool, top bead assist rollers, dual lower bead lifting discs and a nylon non-marring wheel restraint device are important tire shop tools designed to dramatically reduce effort, increase safety, and help minimize operator fatigue. If your shop life demands a tool that will generously handle round-the-clock use and abuse, the R80EX delivers! Key features and specifications: * Sealed electronic components for air-tight, dust-free, and contamination-proof protection of terminal leads * Updated electric motor features the best of proven technologies, including rugged copper rotor construction, high-quality bearings, thermal-cool epoxy insulation and durable rolled steel frames * Balanced flywheel helps machine run smoothly, reduces vibration, and helps minimize associated stress on other machinery components * Table clamping system * Dual pneumatic cylinders * Simple foot-pedal control—durable forged steel (instead of cast iron) and features multi-link rod connections for non-binding plunger movement and precise bilateral control * Adjustable RimGuard wheel clamps feature internal/external multi-teeth jaws * Variable clamp positioning makes wheel service simple, perfectly controlling the wheels when clamping them * Adjustable bead loosener system and pneumatic blade—bead loosener control single-lever control on shovel handle * Bi-lateral power-controlled bead loosener features single-lever control on the shovel handle—this ergonomic design eliminates traditional foot-pedal controls that often force technicians into unbalanced working stances when loosening beads * Dual left and right power assist towers * Tower design tilt-back—provides greater clearance and access for tire removal and inflation * Pneumatic-lock tool head stays positioned on the tower return for instant set up for like sets of tires and wheels * Upper bead assist roller * Standard/Dual power-drop * Traveling drop-center hold-down device * Wheel centering tool/Inflation restraint device * Turbo-Blast bead seating system * Tool tray/Bin storage * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Water filter/Oiler/Lubricator * Air regulator * Tire iron/Bead lever tool * Large soap/Lubricator bucket * Brush * Motorcycle turntable clamps (optional)

Not Yet Reviewed

$11,095.00

Crower Billet Crankshafts

Crower billet crankshafts offer premium quality at not-so-premium prices. Crower manufactures these from milled round bars to produce steel billet crankshafts for just about any engine make and horsepower needs. Premium materials--either billet 4340 chromoly or EN30B steel--are used to create their cranks. They are precision CNC-machined on state-of-the-art equipment by master craftsmen for precise indexing and throw-to-throw consistency. Choose a better made billet crankshaft from Crower and choose peace of mind.

Not Yet Reviewed

$6,287.99

—

$7,736.99

Crower Lightweight Crankshafts

Crankshafts are the most critical part of your engine's performance. Crower lightweight crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. They are made of forged 4340 steel for superior performance and are available with internal and external balance. Crower lightweight crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing but the best, these Crower lightweight crankshafts are your answer.

Not Yet Reviewed

$5,819.99

—

$6,287.99

Crower Enduro Crankshafts

These Crower Enduro crankshafts will handle the horsepower of today's engines. They feature a 4340 NT forging, straight shot oiling, jumbo 1/8 in. radii, and a counterweighted correct design. The heat treating of the Crower Enduro crankshafts makes them stronger and more reliable throughout the entire rpm range. Available in your choice of 2 or 4 lightened holes, Crower Enduro crankshafts are an excellent foundation for your performance engine.

Not Yet Reviewed

$5,506.99

—

$5,757.99

Crower Maxi-Light Crankshafts

Crankshafts are the most critical part of your engine's performance. Crower Maxi-Light crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. They are made of forged 4340 steel for superior performance and are available with internal and external balance. These crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing bur the best, Crower Maxi-Light crankshafts are your answer.

Not Yet Reviewed

$6,633.99

Crower Standard Series Crankshafts

Crankshafts are the most critical part of your engine's performance. Crower Standard Series crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. Made of forged 4340 steel for superior performance, they are available with internal and external balance. These crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing but the best, these Crower Standard Series crankshafts are your answer.

Not Yet Reviewed

$5,131.99

—

$5,495.99

Crower Ultra Light Crankshafts

Crankshafts are the most critical part of your engine's performance. Crower Ultra Light crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. They are made of forged 4340 steel for superior performance and are available with internal and external balance. Crower Ultra Light crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing bur the best, these Crower Ultra Light crankshafts are your answer.

Not Yet Reviewed

$6,619.99

23 Results Found For "bearings"