Availability
BluePrint Engines Fuel Injected Ford 408 c.i.d. Stroker engines are complete long block dressed engine assemblies with EFI. They deliver 450 hp and 470 lbs.-ft. of torque. The engines feature a compression ratio of 9.8:1, aluminum heads, hydraulic roller cam, cast steel crankshaft, and forged pistons. Here are additional specifications: BLOCK: * Hand-picked seasoned block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 2-Bolt Main * 4.000 in. Bored * One-Piece Rear Main Seal * Mech fuel pump provision: Not applicable on "CTF" models ROTATING ASSEMBLY: * New cast steel crankshaft * 4.000 in. stroke * Forged I-Beam 6.200 in. connecting rods * Forged pistons * External 28 oz. balance front and rear CYLINDER HEADS: * BluePrint Aluminum Cylinder Heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration at .050 - 114 degree lobe separation IGNITION TIMING: * 34 degrees total at 3500 rpm ALSO INCLUDES: * Intake manifold * Distributor * EFI system * Oil pan, timing cover and valve covers * Dyno tested and shipped with results WARRANTY: * 30 month / 50,000 mile NOTES: * Not for use in pollution controlled vehicles. * Does not include fuel pump. * Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.
Not Yet Reviewed
$9,499.00
Give your ride a new breath of life with BluePrint Engines GM 496 c.i.d. 600 hp stroker dressed fuel injected long block crate engines with aluminum heads. These engines crank out an incredible 600 hp and 568 ft.-lbs. of tire-shredding torque. Each engine is hand-built and balanced to provide you with a powerful mill that is sure to kick some fresh life into your project car or hot rod. Block: * Hand-picked seasoned Chevy 454 big block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed to within .0002 straightness and roundness * Cylinders are sonic-tested for thickness Rotating assembly: * Forged steel crankshaft * OEM-type connecting rods with 150,000 psi rod bolts * Hypereutectic pistons * Hydraulic roller camshaft Additional features: * Aluminum cylinder heads * EFI system * Distributor * Valve covers, oil pan, and timing cover * 30-month/50,000-mile warranty
Not Yet Reviewed
$12,399.00
—
$14,499.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines with fuel injection are available in three models—two with complete front accessory drive systems. All engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum Holley Sniper 2 EFI System Pro Billet Distributor Harmonic balancer Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. -- INCLUDED ONLY ON MODEL BP454CTFKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. -- INCLUDED ONLY ON MODEL BP454CTFK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
Not Yet Reviewed
$10,999.00
—
$13,049.00
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,959.00
—
$8,509.00
Summit Bucks
Edelbrock E-Force FR-S and BRZ Supercharger kits have finally arrived for your 2.0L equipped FR-S and BRZ. These kits are designed exclusively for the FA20/4U-GSE engine. The unique inverted design features long runners that allow for maximum flow at high rpm, while retaining great daily driving characteristics. The superchargers have been designed from the ground-up and utilize Eaton 1320 TVS rotor assemblies for maximum efficiency in a compact package. As with all Edelbrock E-Force superchargers, these systems feature an efficient high-flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. A large dual pass air-to-water intercooler and heat exchanger cool the incoming air. All of these features help the E-Force supercharger to deliver dramatically improved performance—especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, each supercharger assembly is finished in a durable black powdercoat with red accents for a unique look that will let everyone know your car is E-Force powered! Kits are available with or without tuner. Order the model recommended for your vehicle. Additional product features: * High-flow intake box and filter that allows for twice the airflow * Compact design fits under the stock hood without modification * Supplied with preformed hoses for ease of installation * Bolt-on installation; everything fits right out of the box with no cutting or welding required * Features Eaton Gen VI 1320 TVS rotor assembly—the same high-quality rotors used by many OEM manufacturers * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Includes an EcuTek ProECU Programming Kit with E-Force tune pre-installed * Integrated bypass valve for minimal decrease in fuel economy * 50-state emissions pending with Edelbrock tune * 3-year / 36,000 mile powertrain warranty
( 9 )
$6,187.95
—
$7,350.95
Ready to take your 2024 5.0L Mustang GT to the pinnacle of performance? Roush Phase 1 supercharger kits are engineered to transform your Mustang into a 740 hp powerhouse with unbeatable durability, cooling, and power delivery. The 740 hp, 600 lbs.-ft. of torque Roush S650 Mustang Phase 1 supercharger kit is engineered to provide exceptional performance through innovative design and cutting-edge components, tailored specifically for Mustang enthusiasts seeking peak horsepower and reliability. Roush achieved a 10.55 second 1/4-mile at 133 mph and 0-60 3-seconds with a 1.39G acceleration force on a stock car with this supercharger and slicks on a prepped track (10R80 automatic transmission, 3.55 rear gear ratio). Additional product features and benefits: * This supercharger features a dual front inlet and front-drive setup, maximizing airflow with an optimized, high-flow inlet port. It's designed for ultimate airflow capacity, ensuring your engine breathes freely to produce unparalleled horsepower. * The supercharger head unit boasts a unique Roush Red finish, adding an unmistakable, high-performance look to your engine bay. * The kit reuses the factory twin 80mm throttle bodies, retaining a symmetrical appearance and allowing you to reuse stock induction components for a clean and streamlined look. * Featuring an inverted design, the Roush Phase 1 kit houses dual high-efficiency intercoolers. This setup maximizes heat transfer while lowering intake air temperatures, keeping your engine cool under high demand. * High-Flow Dual Cone Fuel Injectors: Equipped with optimized director plates, the injectors target fuel precisely for efficient combustion and enhanced performance. * Billet aluminum fuel rails provide maximum flow with minimal restriction, ensuring correct injector alignment and a consistent fuel supply to meet the demands of high performance driving. * Designed with a custom FEAD, 90mm pulley, and strategic hardware placement, the supercharger belt runs closer to the engine, reducing crankshaft load and enhancing overall reliability. * The large front heat exchanger delivers exceptional intercooling with minimal restriction to the factory cooling module. Its custom design makes installation straightforward, with no need to remove the front fascia, saving install time and minimizing any risk of damage. * Each kit includes a high-capacity degas bottle that prevents coolant aeration, offering superior cooling capacity for consistent performance. * The intercooler pump is a high-flow Bosch PCE model, delivering reliable cooling to support long-lasting supercharger performance. * Every hose in this kit is custom-formed to ensure a clean installation and streamlined underhood appearance, making the system as easy to install as it is to admire. * The entire kit is engineered to fit beneath the stock Mustang hood and K-brace without any modification. The K-brace doesn't need to be removed, making installation simpler and preserving the structural integrity of your Mustang. * All wiring is plug-and-play, offering a smooth and straightforward installation process. * Colder heat range spark plugs with a reduced gap come pre-installed, ensuring optimal performance and durability under increased boost. * The kit is calibrated with Roush's Diagnostic Tuning Software, delivering best-in-class performance while maintaining seamless diagnostic capabilities. This software ensures the kit runs smoothly while adhering to Roush's high standards. * Developed in partnership with Magnuson, a company with over 50 years of supercharging experience, this kit brings together Roush's and Magnuson's expertise for a product that excels in performance, durability, and innovation.
Not Yet Reviewed
$9,995.00
Roush 2021-25 5.0L F-150 Phase 1 supercharger kits provide instant throttle response and can generate increased power through the engine's entire powerband. They utilize the 2.65L R2650 TVS supercharger, adding an additional 305 hp over stock, boosting power output to 705 hp and 635 lb.-ft. torque! As always, this power comes with peace of mind. This Roush Performance system is backed by their in-house 3-year/36,000-mile limited powertrain warranty when installed by a certified ASE technician. The roots-type positive displacement supercharger with twin 4-lobe rotors that are twisted 170 degrees offers a long list of benefits including, greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Roush supercharger kits have completed hot development trips to validate cooling performance, AC performance, and towing capability. Over 900 hours of dyno engine durability and testing were completed to validate the supercharger and meet Roush Performance's engine durability requirements. Key features and benefits: * Billet aluminum viscous crankshaft damper developed by Roush engineers to reduce the increased torsional inputs needed to handle the increased power level, improving durability and longevity of supercharger * Uniquely developed spark plugs, optimized for forced induction application * 107 percent larger LTR surface area for increased cooling (2 times larger than the previous Roush low-temperature radiator) * Retains all factory driving modes * 3-year/36,000-mile Limited Powertrain Warranty included when installed by Ford dealer or an Automotive Service Excellence-certified technician * Includes all necessary installation hardware * Roush Performance calibration included (to be downloaded using the Roush RDT software) * Calibration optimized for 93 octane fuel (premium fuel recommended, compatible with 91 octane) * Roush calibration removes the cylinder deactivation feature (Variable Displacement Engine)
Not Yet Reviewed
$8,649.99
APR K04.3 GTS turbocharger system converts your 991.2 911 3.0T to the larger factory GTS turbochargers and includes APR's Stage 3 ECU upgrade, making the conversion plug-and-play. Up-to 615 hp and 549 lb.-ft. of torque is available with no other modifications--a substantial increase in power and torque. Expect up to an additional +263 hp and +266 lb.-ft. over stock on the base engine, and +244 hp and +223 lb.-ft. on the S engine. APR K04.3 GTS turbocharger systems features include: * Massive power and torque increase eclipsing GTS model power figures * Direct, bolt-on turbocharger upgrade using genuine and OEM parts * Compatible with all factory hardware including all emissions and fueling * Compatible with most bolt-on upgrades * Up to 649 hp with additional cooling * Genuine Borg Warner turbochargers * Genuine Porsche gaskets and O-rings * Backed by APR's industry leading support
Not Yet Reviewed
$7,599.95
ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models
Not Yet Reviewed
$8,154.00
—
$9,759.00
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$5,249.99
—
$10,390.99
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
Roush 2018-21 5.0L Mustang Phase 2 supercharger kits delivers thrilling power, unparalleled performance, and versatility across both manual and automatic transmissions. They build on the enhanced performance of the Phase 1 supercharger system and boosts the stock 5.0L V8 Ford Mustang GT to an astounding 750 hp and 670 lb.-ft. of torque--a gain of 290 hp over the stock engine. The high-capacity, low-temperature radiator provides increased cooling capability and works with Eaton's TVS R2650 technology for greater power output. The larger LTR and upgraded calibration work in harmony to improve cooling and optimize performance, giving drivers extra laps at the track. Additional features: * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * 3-year/36,000 mile limited Roush powertrain warranty included * Includes all necessary installation hardware
Not Yet Reviewed
$8,399.99
Keep your Mustang at the front of the pack with one of these NOVI-2200 Mustang supercharger kits from Paxton. These race-proven systems are available in complete kits for a variety of Mustang models. These supercharger systems will increase horsepower from an approximately 300 to 470 and torque from 320 lb.ft to 420 lb.ft. They are designed to run with stock engines with boost pressure of 9.5-10.5 psig. These systems include: * Massive 24 inch x 13 inch x 3.5 inch charge cooler core with 3 inch mandrel bent aluminum tubing assembly capable of supporting up to 900 horsepower * Fuel management upgrade includes replacement high-flow fuel injectors and replacement high-flow fuel pump for safe, reliable operation * DiableSport Predator hand-held programmer to re-flash factory processor plus provides additional functions, such as fuel and timing adjustments, speedometer calibration for changes in tire size, automatic shift firmness adjustment and data logging * High-flow re-useable air filter * High-flow compressor bypass valves provide surge free operation * Inlet and discharge duct connections utilize heat resistant silicon sleeves and premium quality stainless steel clamps * Oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions * Billet aluminum supercharger mounting bracket assemblies include all hardware
Not Yet Reviewed
$6,800.99
—
$9,051.99
No more cookie-cutter supercharger kits! With these NOVI-2000 Mustang tuner supercharger kits from Paxton, you can custom-tune to fit your heavily modified Mustang. These are non-tuned kits that let you do the calibrations. The heart of these kits is the race-proven NOVI-2000RR reverse rotation supercharger that is capable of extreme boost numbers for extended time periods. The kits come with 1/2 in. thick, black anodized billet aluminum mounting brackets, a cast aluminum rock-honed discharge tube, a high-flow air filter, an air inlet assembly, oil lines, and an air/air charge cooler assembly. Power increases will vary, depending upon the fuel system and computer chip calibration. These systems do not include a fuel system or calibration components. An aftermarket fuel pump, injectors, and ECM tuning will be required for proper operation. To eliminate the need for an extra belt, they use the NOVI-2000RR reverse rotation unit. This allows the drive pulley to be spun by the engine accessory belt, eliminating the need for an additional supercharger drive system.
Not Yet Reviewed
$5,268.99
—
$5,518.99
Keep your Mustang at the front of the pack with one of these NOVI-2000 Mustang supercharger kits from Paxton. These race-proven systems are available in complete kits for a variety of Mustang models. They come with 1/2 in. thick black-anodized billet aluminum mounting brackets, a cast aluminum rock-honed discharge tube, a high-flow air filter, a compressor bypass valve, and a fuel control unit. Paxton has made these superchargers 50-state legal and OBD II compatible, and packaged them with all necessary hardware, plumbing, and a detailed instruction manual. To eliminate the need for an extra belt, they're available in NOVI-2000RR reverse rotation models. The NOVI-2000RRs are the same as the original NOVI-2000s, except that everything is built in a mirror image, so the supercharger can be mounted "backwards," with the intake facing towards the front of the engine. This allows the drive pulley to be spun by the engine accessory belt, eliminating the need for an additional supercharger drive system. They have all of the same other features and components as the standard rotation kits.
Not Yet Reviewed
$6,042.99
—
$6,486.99
Paxton NOVI-2000 Renegade supercharger kits are the answer for racers who have been searching for a driver side mounted supercharger. The driver side bracket allows for the use of a straight discharge supercharger, which can provide better airflow and higher boost than the 90 degree rear-discharge units. These kits utilize a straight discharge NOVI-2000 supercharger, equipped for race duty with an extrude-honed scroll for better airflow, and a cryogenically treated impeller for increased rigidity. The blower mounts to the driver side of the vehicle using the Tri-Plane race bracket design, and is capable of 18-25 lbs. of boost. Air is routed through a mandrel-bent discharge tube with two bypass valve mounting plates. An 8 in. crank pulley and 3 1/2 in. supercharger pulley are included with two 8-rib supercharger belts. Oil lines for the supercharger and a Renegade reducer sleeve are included, along with a crank pulley assembly and instruction manual. However, the racer must supply all additional fuel and air intake components.
Not Yet Reviewed
$7,674.99
ProCharger P-1X Stage II supercharger systems feature the more efficient P-1X head units to reach an even higher level of performance. With highly effective intercoolers, programmer, and additional components, these complete kits will deliver more power per psi, more maximum horsepower, and the coolest charge air temperatures. The installation is straightforward with the finished product providing an outstanding OEM-quality appearance. Cooler air means more power, and ProCharger P-1X Stage II supercharger systems deliver thermal advantages for incredible, real-world power.
( 1 )
$8,549.00
—
$10,434.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
Summit Bucks
Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.
( 4 )
$7,931.95
—
$9,038.95
Summit Bucks
Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2650 TVS supercharger rotating assembly—a seamless design with minimal elements to eliminate problems and increase airflow. Start your custom-built racer on a winning foundation with an Edelbrock E-Force TVS2650 Mustang Stage 3 Pro-Tuner supercharger kit. Order the model with options you prefer. (These systems are for competition racing use only.)
Not Yet Reviewed
$7,811.95
BluePrint Engines 400 SBC-compatible performance crate engines are dyno tested with guaranteed power levels of 500 hp and 500 lb.-ft. of torque with a compression ratio of 10.3:1. These deluxe dressed, multi-port fuel injection systems, complete with ECU and full wiring harness, are specifically tuned and optimized engines that will perform well beyond most self-learn EFI systems available today. Designed for hassle-free start up and operation, they are available with or without a polished or black finish pulley kit. Select the 400 SBC-compatible performance crate engine desired for your build. Specs and features: * BluePrint Engines high-strength cast iron block -- Drilled and tapped for clutch linkage -- One-piece rear main seal -- 4-bolt main -- 4.125 in. bore * Rotating assembly: -- BluePrint forged crankshaft -- 3.750 in. stroke -- 5.700 in. connecting rods -- BluePrint forged pistons -- Internally balanced front, externally balanced rear * BluePrint Performance aluminum cylinder heads: -- 64cc chamber -- 2.08 in. intake/1.600 in. exhaust valves -- 220cc intake/65cc exhaust runners * BluePrint hydraulic roller camshaft: -- .553 intake/.576 exhaust lift -- 236 intake/242 exhaust duration at .050 -- 110-degree lobe separation * Ignition timing: -- Computer controlled by BluePrint ECU * Additional components: -- BluePrint multi-port fuel injection--self-learning electronic control unit -- Single plane machined aluminum intake manifold -- Polished chrome "BluePrint" engraved valve covers -- Polished chrome BluePrint air cleaner -- Satin aluminum water pump -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Distributor -- Oil pan * Polished or black front accessory drive (depending on kit selected): -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$9,349.00
—
$11,399.00
The LS-compatible platform is the king of street machines, and BluePrint's Chevy LS 427 c.i.d. Pro Series monsters prove why, unleashing a street-scorching 585 hp and 520 lb.-ft. of torque. These base dressed crate engines pack a 11:1 compression ratio, along with matched BluePrint components into a high-strength LSX-style cast iron block. Available with or without fuel injection ECU and wiring harness. Select GM LS-compatible Pro Series engine needed for your build. Specs and features: * BluePrint Engines high-strength cast iron (LSX-style) block -- Increased deck thickness and strength webbing -- Utilizes OEM LS3 front and rear covers -- Improved water jacket design -- Extended cylinder skirt -- Priority main oiling -- One-piece rear main seal -- 6-bolt main -- 4.0695 in. bore * Rotating assembly: -- Forged crankshaft -- 4.125 in. stroke -- Forged 6.125 in. connecting rods -- Forged pistons -- Internally balanced front and rear * BluePrint LS3 aluminum cylinder heads: -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 -- 114-degree lobe separation * Ignition timing: -- ECM supplied with calibration -- Not capable of transmission control -- Transmission controller required * Additional components: -- Drive-by-wire throttle body -- LS3 cast aluminum intake manifold -- LS swap oil pan -- Water pump -- Injectors and fuel rail kit -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Valve covers -- Coil packs
Not Yet Reviewed
$11,599.00
—
$14,149.00
BluePrint Engines Pro Series Chevy 427 c.i.d. 605 hp dressed stroker long block crate engines are factory dyno tested with a complete MPFI system. These GM LS compatible performance engines are capable of producing at least 585 hp and 520 lbs.-ft. of torque. The PSLS4278CTFK comes with LS cast aluminum intake, coil packs with spark plugs and wires, retro fit oil pan, water pump, harmonic balancer, all sensors to run the engine, gas pedal, with a polished front pulley kit. -- Description: * Horsepower and torque: 585 hp / 520 lbs.-ft. * Compression ratio: 11:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Forged pistons -- Block: * BluePrint Engines high-strength cast iron (LSX style) block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.0695 in. bore * 6-bolt main * 1-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads - PS8015 * 69cc chamber * 2.165 in. Intake / 1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners -- Cam Specs: * Hydraulic roller * .624 Intake / .624 Exhaust lift * 239 Intake / 255 Exhaust duration * at .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission controller required -- Also Includes: * Drive-by-wire throttle body * BluePrint Engines cast aluminum intake manifold * 42 lb. injectors and returnless fuel rail * Harmonic balancer * Valve covers * Retro fit oil pan * Timing cover * Coil packs * Spark plug and wires * Wiring harness * Gas pedal * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor -- Notes: * This engine requires a non-weighted flex plate/flywheel. * Recommended Fuel: 91 Octane. * The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. * BluePrint Engines recommends a 2200+ RPM stall converter. * Retro fit oil pan will fit most 1955-95 GM front engine, RWD, V8 cars. * Not for use in pollution-controlled vehicles or in dry sump applications. * The included LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for the engine; however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The included ECU is unlocked for further refinement at your local dyno shop if required. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$16,049.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
