Free Shipping on Orders Over $109 at Summit Racing

BluePrint Engines Low Profile GM 383 C.I.D. 436 HP Dressed EFI Long Block Crate Engines

BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,399.00

On Sale

BendPak P-9000LTF Low-Rise Open-Center Pit-Style Lifts

BendPak P-9000LTF low-rise open-center pit-style lifts have a lot of lifting potential. With their optional arm extension kit, high-stance trucks and SUVs can be easily serviced. Shops run faster and earn more with one of these lifts at their disposal. A host of clever engineering devices and standard features ensure this car lift will last for many years of valuable service. Additional facts and specs: * 9,000 lb. lifting capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick set-up

Not Yet Reviewed

$6,895.00

$6,445.00

On Sale

BendPak LR-1000 Low-Rise Lifts

BendPak LR-1000 low-rise lifts are your solution for quick maintenance and increased productivity when servicing today's passenger cars and light trucks. From tire and brake service … to vehicle detailing and body repair, these lifts will facilitate your work on a wide variety of vehicles. Additional facts and specs: * Low-profile height that accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs * Single-point safety release make this lift easy to operate and very safe to use * Dropped crossbar in the center provides added vehicle drive-over clearance. Suspension work, oil changes, wheel and brake service, and detailing are easier than ever * Industrial-grade hydraulic cylinder * Solid rubber lift blocks

Not Yet Reviewed

$5,495.00

$5,095.00

On Sale

BendPak P-900LT Low-Mid-Rise Lifts

BendPak P-900LT low-mid-rise lifts are heavy-duty. With increased lift capacity of 30 percent over past models, they maintain all the features you love—like the dual-approach design, open-center access, and a hands-free safety check. This is the industry's ultimate pit lift, perfect for quick-lube shops, full auto centers, and home garages. The P-900LT offers a minimal footprint and full access to the wheels and undercarriage. Ramps detach quickly to convert a flush-mount unit to a floor unit. Additional facts and specs: * 9,000 lb. capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick setup

Not Yet Reviewed

$6,995.00

$6,495.00

BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Block Crate Engines

Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results

4.79 out of 5 stars ( 62 )

$8,199.00

Edelbrock E-Force Camaro SS Stage 3 Pro-Tuner Supercharger Kits

Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 TVS supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation that's made in America with these Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.

5.0 out of 5 stars ( 1 )

$7,508.95

Edelbrock E-Force Camaro SS Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.

4.67 out of 5 stars ( 3 )

$8,739.95

—

$9,286.95

RideTech Corvette Coilover Suspension Systems

RideTech Corvette coilover suspension systems include MuscleBar sway bars, Delrin control arm bushings, and powdercoated conversion brackets. The 100 percent bolt-on kit will significantly improve your Corvette's handling, while giving you control over ride-height adjustment. RideTech engineers custom-tailored the system's HQ Series shock absorber valving for modern, world-class ride quality. Rebound adjustment knobs help you fine-tune ride and handling to your driving style and tire selection. For the ultimate track experience, upgrade to the TQ Series coilovers with a remote reservoir for high and low speed compression adjustments. RideTech's CNC-bent MuscleBar sway bars increase bar rate over stock, allowing for more comfortable, compliant coil spring rates. MuscleBars feature investment cast bar ends that perfectly engage end-link bushings as your Corvette's cornering loads change. Delrin-lined mounting bushings never squeak or need lubricating. The same is true for the kit's Delrin A-arm bushings. Overall, the C4 Corvette coilover conversion systems offer tremendous bang for the buck with real-world improvements. They're a game changer for the C4 Corvette platform. (Included shock absorbers carry a 1,000,001 mile warranty.)

Not Yet Reviewed

$7,770.00

RideTech 1967-69 Camaro/Firebird Complete Coilover Suspension Systems

RideTech 1967-69 Camaro/Firebird complete coilover suspension systems include everything you need to completely upgrade your existing suspension. The package contains front upper and lower StrongArm control arms, tall spindles, front MuscleBar, a rear bolt-on 4-link, and four HQ Series coilover shocks for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all the guesswork out of what are the best parts to purchase. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. RideTech complete coilover systems include: * RideTech tall spindles will induce more negative camber gain to maximize tire contact patch during cornering. It also offers a 2 in. pin drop which allows for the use of longer shocks creating more suspension travel. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. The lower shock mount is dropped to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilover shocks utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. The rebound knob is located at the top of the shock for underhood access. * Front MuscleBar helps to reduce body roll and creates room for wider front tires. It includes the PosiLink end links that provide immediate engagement between the chassis and control arms. * Bolt-on 4-Link greatly improves traction, handling, and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini tubs. The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.

Not Yet Reviewed

$5,975.00

Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines

Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system

Not Yet Reviewed

$5,947.99

—

$7,152.99

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$5,297.70

—

$8,147.20

GearStar GM 4L80E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan

Not Yet Reviewed

$6,845.00

RideTech 1970-81 Camaro/Firebird Complete CoilOver Suspension Systems

The RideTech 1970-81 Camaro/Firebird Complete CoilOver suspension systems include everything you need to completely upgrade your existing suspension. The package contains front upper and lower StrongArm control-arms, front MuscleBar, a rear Bolt On 4-Link, and 4 HQ Series CoilOvers shocks for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. RideTech Complete CoilOver systems include: - Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. - Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction. - HQ Series CoilOver shocks utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling. The rebound knob is located at the top of the shock for under hood access. - Front MuscleBar helps to reduce body roll and creates room for wider front tires. It includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. - Bolt On 4-Link greatly improves traction, handling and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. Equally important, the unique design addresses production variations and frame rail thickness issues that are common to the second-generation F-Body platform. Works with minitubs. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!

Not Yet Reviewed

$5,605.00

Chevrolet Performance SP350/357 Base Chevrolet Crate Engines

If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included

5.0 out of 5 stars ( 2 )

$6,215.21

QA1 1988-98 C1500 Front and Rear Coilover Conversion Systems

QA1 1988-98 C1500 front and rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 front control arms and rear torque arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long lasting durability. Topped off with performance ball joints and low-friction, maintenance-free bushings. Complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This kit will add more stability and allows for optimum camber adjustment in a lowered truck. Easily bolt in this system--no welding or bed removal required. Everything needed is included, all the way down to the hardware.

Not Yet Reviewed

$5,597.95

—

$6,879.95

RideTech 1968-72 GM A-Body Complete Coilover Systems

RideTech 1968-72 GM A-body complete coilover systems include everything necessary to create modern drivability for your vintage GM muscle car. All the parts are designed to maximize tire contact, while providing high-speed stability and steering feel. The included rear StrongArms utilize RideTech's innovative R-Joint technology—combining the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation in one bearing. Take the guesswork out of purchasing a new suspension for your classic with a RideTech complete coilover system. Kit items, features, and specs: * Front upper and lower control arms * Tall spindles induce more negative camber gain, allowing tires to lean into the turn—and allowing for longer shocks and more suspension travel * Upper and lower front StrongArms include Delrin bushings to reduce deflection and stiction * Four HQ Series coilovers allow fine tuning via rebound knob at the top of the shock; they come standard with a 1,000,0001-mile warranty * Brackets included with rear coilovers for easy attachment to frame and rear-end * Front MuscleBar helps reduce body roll, creates room for wider front tires, and includes PosiLink end links for immediate engagement between chassis and control arms * Adjustable-rate rear MuscleBar

Not Yet Reviewed

$5,645.00

Ranger CoolCharge A/C Recovery and Recharging Machines

Ranger's CoolCharge A/C recovery and recharging machines make vehicle A/C recovery, recycling and recharging faster and easier than ever! These automatic programmable CoolCharge AC-134 machines are designed to evacuate and recover 95 percent of old coolant and recharges vehicle A/C systems within +/- 0.5 oz. of the desired charge. There's nothing easier than programming the A/C settings, and then walking away to let the Ranger CoolCharge AC-134 machine do its job. Features and specifications: * Meets UL 1963 and SAE J2788 Standards * Refrigerant: R134a * Flushing function for rapid discharge of used coolant * Electric database * Car, truck, SUV, and bus compatibility—Electric/Hybrid vehicles excluded * Automatic oil discharge * Programmable vacuum for faster recharge and recovery * Oil injection: Solenoid/visual * Refrigerant charge: Automatic with electronic scale * A/C Pressure adjustment * Operation record for total convenience—a large display faces upright on the machine and an optional print features lets you provide results for both you and your customers * Automatic CoolCharge is 100 percent programmable, so there's no standing over and babysitting the automated recharge and recovery process—while the machine works, technicians can perform other inspections and truly provide the best possible customer care in your region * Oil that is drained during operation is stored internally in a container, and the simple LCD display will indicate how much needs to be returned to the vehicle system * The filter quality and refrigerant levels are also automatically monitored by the machine—functions will cease in the event the filter is too dirty or the refrigerant level becomes too low to service the vehicle * Massive 12 in. back wheels and lockable 4 in. front casters allow you to easily maneuver the machine virtually anywhere and conveniently lock in place with a foot-activated switch to keep unit stationary while in use * Manual and full auto modes included

Not Yet Reviewed

$5,795.00

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

GearStar Ford 4R70W Level 3 Transmissions

GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm

Not Yet Reviewed

$7,095.00

Edelbrock E-Force Mustang Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.

3.0 out of 5 stars ( 2 )

$7,644.95

—

$9,396.95

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$15,262.99

iDEAL Equipment Mobile Single Column Lifts

iDEAL Equipment mobile single column lifts are the perfect lift for shops or homeowners with limited space or situations where lift portability is more important than a floor-mounted 2-post lift. The low-profile design and drive-over ramps make vehicle loading possible, while the pallet jack feature allows positioning under the vehicle for loading. The 72 in. lift height allows access under most vehicles making it ideal for pre-service inspections or maintenance, while also providing outer vehicle access around most vehicles for wheel service repairs. Features and benefits: * Lift capacity 6,000 lbs. * Low profile design under 4 ft. * Rigid base construction * Single point locking release * Telescoping 2-stage swing arms * Low profile spin-up lift pads * 2 in. x 4 in. stackable lift pad extensions * 21 locking positions * Durable powdercoat finish

Not Yet Reviewed

$5,610.00

RideTech 1955-57 Chevy Air Suspension Systems

RideTech 1955-57 Chevy air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. They're available to fit a variety of Tri-Five models. Choose the air suspension system recommended for your year/make/model. Some kits may vary depending on your specific application. The RideTech 1955-57 Chevy air suspension systems feature: * Upper StrongArms (powdercoated black and fully assembled with ball joints, bushing and cross shafts, ready for installation) * Lower StrongArms (powdercoated black and fully assembled with ball joints, bushing and cross shafts, ready for installation) * HQ Series Shockwaves utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling * Front MuscleBar: helps reduce body roll and includes PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link greatly improves traction, handling and ride quality (R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing) Important note: Control system not included. To complete the air suspension system, a RideTech compressor system is required. Helpful note: To determine the difference between 1-piece and 2-piece frames on the 1955, 1956 and 1957 cars, look at the bottom of the main frame rail under the driver's door area. * The 1-piece frame cars the bottom of the frame will be flat and smooth, and is often called the "California" frame * The 2-piece frame design has a rough weld seam right down the bottom center of the frame rail front to rear

Not Yet Reviewed

$5,590.00

RideTech 1967-69 Camaro/Firebird HQ Air Suspension Systems

RideTech offers HQ air suspension systems for 1967-69 Camaro and Firebird (GM F-Body) applications. These Air Ride adjustable suspensions enable you to raise or lower your muscle car at the push of a button. The systems include front and rear HQ Series Shockwaves with adjustable rebound, plus upper and lower StrongArm front control arms, tall spindles, a bolt-on 4-link, and a front MuscleBar sway bar. Air Ride provides ultra-low show stance with modern ride quality and handling—and includes several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Systems are available with "pin" or "hub" spindles. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * OR … "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late-model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking, and reduced maintenance. (Hubs not included). Compatible with C5/C6 Corvette brake systems, OE, and aftermarket (caliper brackets included). Minimum 17 in. wheels. * The upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * The lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is at the top of the shock for easy underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * The bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, combining the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Early Camaro/Nova front-ends have very poor suspension geometry—the tires lean outward around turns, the bump steer is bad, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The TruTurn System resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically means faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Compressor Sytems: RideTech offers its RidePro E5 air suspension control system as a pre-assembled, all-in-one module as the "AirPOD"; or you can purchase the RidePRO E5 system as a component kit to install how you like.

Not Yet Reviewed

$6,165.00

—

$6,315.00

113 Results Found For "low"