10 Results Found For "straps"

Showing In Stock Items. Show All 24 Items.

Individual Parts

Part Groups

Results 1 - 10 of 10

GearStar GM 4L80E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan

Not Yet Reviewed

$6,845.00

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

RideTech 1967-69 Camaro/Firebird HQ Coil-Over Systems

RideTech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * TruTurn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.

Not Yet Reviewed

$6,125.00

RideTech 1967-69 Camaro/Firebird HQ Air Suspension Systems

RideTech offers HQ air suspension systems for 1967-69 Camaro and Firebird (GM F-Body) applications. These Air Ride adjustable suspensions enable you to raise or lower your muscle car at the push of a button. The systems include front and rear HQ Series Shockwaves with adjustable rebound, plus upper and lower StrongArm front control arms, tall spindles, a bolt-on 4-link, and a front MuscleBar sway bar. Air Ride provides ultra-low show stance with modern ride quality and handling—and includes several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Systems are available with "pin" or "hub" spindles. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * OR … "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late-model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking, and reduced maintenance. (Hubs not included). Compatible with C5/C6 Corvette brake systems, OE, and aftermarket (caliper brackets included). Minimum 17 in. wheels. * The upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * The lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is at the top of the shock for easy underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * The bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, combining the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Early Camaro/Nova front-ends have very poor suspension geometry—the tires lean outward around turns, the bump steer is bad, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The TruTurn System resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically means faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Compressor Sytems: RideTech offers its RidePro E5 air suspension control system as a pre-assembled, all-in-one module as the "AirPOD"; or you can purchase the RidePRO E5 system as a component kit to install how you like.

Not Yet Reviewed

$6,165.00

—

$6,315.00

GearStar Ford 4R70W Level 3 Transmissions

GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm

Not Yet Reviewed

$7,095.00

Trail-Gear Trail-Link 3-Link Tacoma Solid Axle Swap C Kits

Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.

Not Yet Reviewed

$7,999.99

ADS Direct-Fit MBR Coilover Suspension Systems

ADS offers direct-fit MBR coilover suspension systems for a variety of applications, including many Can-Am UTV models from 2017 and up. MBR technology, or Multi-Stage Bypass Ring, embodies a genuine multi-stage bypass system where each zone is independently adjustable via a positive stop helix system. This design ensures ample flow, similar to 7-tube external bypasses on 16 in. stroke variations; and internal free bleed ports enable tuners to optimize the damping curve for specific vehicle needs. A true top-out zone provides both mechanical and hydraulic damping, guarding against shock damage during full extension in harsh conditions, although the use of limit straps is recommended for racing and severe use. Additionally, the 4-way adjustable reservoir allows independent high- and low-speed adjustments for compression and rebound events. A dual hose system establishes a genuine recirculating fluid path to the reservoir, maximizing fluid cooling with internal diverters ensuring fluid flow across the entire shock body for enhanced cooling efficiency. Each unit undergoes vacuum bleeding and features full synthetic fluid to reduce fade and extend product life. Furthermore, large 2.5 in. reservoirs increase fluid capacity to aid in cooling, while high-temperature seals prevent blow-by for consistent performance across a wide temperature range. Threaded end caps prevent contamination from external sources. Finally, a 3-stage urethane seal package delivers unmatched sealing performance, suitable for extreme cold snow-ridden trails and scorching deserts alike. Sold with front pair and rear pair.

Not Yet Reviewed

$9,749.95

On Sale

Stilo Venti WRC Zero 8860 Carbon Helmets

The Stilo Venti WRC Zero 8860 helmets have an all-new shell design specifically to allow for integration with the groundbreaking Stilo 'WL' wireless communication system. As Stilo 'Zero' helmets, they are designed for ultimate weight-saving—while exceeding the ultra-stringent FIA 8860-2018 requirements for safety. Venti WRC Zero 8860 carbon helmets, as with all the 'Zero' helmets in Stilo's lineup, have been developed for the most discerning competitor. The redesigned carbon fiber shell is constructed using PURO technology which removes the need for a clearcoat to be applied. This further reduces the weight, making it the lightest rally helmet available—which can hugely reduce muscle fatigue. Venti WRC helmets retain the tried and tested Stilo WRC intercom system, but the comms port has been re-designed for use with the WL wireless key (sold separately) which, when fitted, fits perfectly with the contours of the shell shape so it doesn't interfere with FHR posts or straps. The microphone boom shape has been improved to further deflect cabin noise, improving the communication clarity between co-driver and driver. The magnetic dynamic, noise-cancelling microphone is adjustable to allow for optimum spacing from the mouth to reduce external noise. The helmets' intercom system is also compatible with traditional Stilo wired amplifiers, so there's no need to change helmets for vehicles which do not have a wireless amplifier. Details at a glance: * Designed specifically for use with the Stilo 'WL' wireless communication system, although the helmets are perfectly compatible with all hard-wired Stilo DG and WRC series amplifiers * Strongest and lightest rally intercom helmet on the market * Adjustable microphone: Venti WRC is fitted with a new easily adjustable microphone holder. All it takes to change the position of the microphone is to remove the holder padding and to insert spacers that move the microphone 5, 10 or 15mm closer to the mouth * Earmuffs: Noise-attenuating, which reduces ambient noise—a problem in many competition cars. Soft and comfortable, ideal for longer stages. * EPS cheek pads: Venti WRC is the only helmet on the market fitted both with earmuffs and EPS (expandable polystyrene) cheek pads. The use of EPS cheek pads ensures better protection in case of lateral impacts * Adjustable peak: The peak can be raised and lowered to give the driver clear visibility even when the sun is on the horizon

Not Yet Reviewed

$6,500.00

iDEAL Equipment Powertrain Lift Tables

iDEAL Equipment powertrain lift tables are portable, high-rise commercial and industrial grade tables incorporating a "multi-adjustable" powertrain platform primarily designed to assist with controlled lifting and lowering tasks to safely remove, replace, or service heavy vehicle components, such as engines, transmissions, drive-axle and transaxle assemblies, or other similar heavy components. Available as a 2,500 lb. air-hydraulic or a 3,300 lb. 12 VDC battery-powered electric-hydraulic style table, both are equipped with a durable powertrain platform that includes extendable length along with tilt and height adjustments. Each one also has their own unique features that combined provide maximum strength, stability, and safety for added efficiency and convenience. Select the iDEAL Equipment powertrain lift table model you prefer. Additional features and notes: The LT-PT2500AH-X incorporates an exclusive fully operational pneumatic hand operated stainless steel control panel with integrated air gauge and water separator. Also included are high-quality locking swivel and directional poly casters, tool tray, removable hand bar, double lift scissors, HD air-hydraulic pump and hydraulic cylinder, tie-down anchors, and a heavy-duty ratchet strap. The LT-PT3300DC-X incorporates a fully operational remote hand controller and control box panel buttons for dual-control function operations, and includes a high-quality deep-cycle 12 VDC sealed battery, integrated battery charger, and 12 VDC auxiliary outlet port. This table comes standard with a pallet jack dolly with poly casters, leg support stands, front locking swivel and directional poly casters, utility/tool tray, double lift scissors, powerful DC electric motor, dual hydraulic cylinders, tie-down anchors, and a heavy-duty ratchet strap.

Not Yet Reviewed

$6,650.00

—

$8,020.00

Spicer Drivetrain Products Ultimate Dana 60 Crate Axle Assemblies

Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness

Not Yet Reviewed

$8,499.99

—

$9,499.99

Page 1 of 1