Availability
BendPak HD-9 standard width car lifts are ideal for vehicle storage in residential garages or commercial buildings. They can also double as great service lifts for smaller shops that do a lot of business. The BendPak HD-9 car lifts are about the size of a typical parking space and will truly maximize your valuable floor area. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push button pneumatic safety release * Independent backup slack cable safety latches
( 5 )
$6,095.00
The space saving design of the 9,000 lb. capacity BendPak HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. These lifts are about the size of a typical parking space, helping to maximize floor space. The BendPak HD-9XW is great for storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Runways accommodate narrow and standard vehicles * Electric / hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Removable approach ramps for additional drive-under clearance
( 14 )
$6,495.00
BendPak 10APX Series 2-post lifts are the next generation of lifts with an increased height. These tall-rise lifts are built with the future in mind, and have all the features you'll need to service vehicles as effectively as possible. The revolutionary 10APX lift can handle Electric Vehicles effortlessly and can adapt to both symmetrical and asymmetrical configurations. BendPak's 10APXs have been designed to accommodate mechanics that are constantly in uncomfortable positions while on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., giving you plenty of room to work comfortably with the best equipment available. Features and benefits: * Durable powdercoat finish * Expandable top beam accommodates wide or narrow drive-thru configurations * Double-telescoping screw pads offer increased versatility * Padded overhead safety shut-off bar * Exclusive Bi-Metric swing arm design for more versatile arm positioning * Single-point safety release * Drop-end arms provide a lower pad height * Dual hydraulic direct-drive cylinders * Oversized 53 in. and 59 in. tall carriages for superior strength and durability * Electric/hydraulic HVLP power system * Self-lubricating dura-glide UHMW polyethylene bearing system * Safety locks in each column spaced every 3 in. * Automatic arm restraints withstand over 2,000 lbs. of side force * Heavy-duty 1/2 in. aircraft-quality equalizer cables * Oversized cable sheave diameter reduces cable fatigue * 14-piece standard adapter set * Four triple-telescoping arms * ALI certified
Not Yet Reviewed
$6,895.00
Shorter, wider, taller--BendPak HD-7W car lifts provide extra for your smaller space! These shorter, extra-wide, extra-tall 4-post lifts offer the ultimate in compact convenience with BendPak lifting power. The lifts feature a heavy-duty, high-quality design with large base plates for a good foundation, stainless steel lifting cables for maximum lifting strength, and hydraulic power systems for the utmost dependability. HD lifts are finished with a durable powdercoated finish to withstand the harshest environmental or chemical conditions. Maximize your floor space by moving up with BendPak HD-7W car lifts. Other BendPak HD-7W car lift features include: * 7,000 lb. maximum lifting capacity * Wide drive-through with tall lifting height and short runways * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Ramps have nonskid surfaces * Push-button pneumatic safety release
Not Yet Reviewed
$6,695.00
BendPak introduces a game-changing solution for auto repair shops seeking flexibility in installation—the 10AP-168 Series 2-post lifts! As the automotive landscape evolves with advanced technology, it's crucial for auto repair shops to keep pace by equipping themselves with the latest tools and technology. Enter BendPak's revolutionary AP series of two-post lifts, marking a new era in car lift engineering. These lifts are meticulously designed to integrate the best features from existing two-post lift types into an entirely novel concept, catering to extreme use, heavy loads, and operator safety and efficiency. The 10AP-168 delivers everything professionals love about the AP Series in a taller package. Unlike the standard 10AP, this lift offers an enhanced overall height of 168 in., giving taller techs the room, they need to work more effectively. Additional product features and specs: * Premium-grade materials, a cutting-edge design, as well as a 10,000 lb. lifting capacity * Boasting an expandable top beam and innovative BI-METRIC arms, this lift can accommodate virtually any vehicle lifting requirement, whether it's symmetric or asymmetric * Intelligent lift design strikes a balance between simplicity and sophistication, resulting in minimal service and maintenance costs, leading to reduced operating expenses and heightened productivity * Evolutionary Automatic Swing Arm Restraint System (ASARS) stands strong against the forces exerted when vehicles unexpectedly shift during loading or service * Innovative and patented triple-telescoping swing arms redefine lifting precision—unique three-stage design, complete with a patented nesting feature, enables greater retraction and extension (inner sliding arm movement reaches new levels without any hindrance, allowing for precise lifting action with increased efficiency) * Exclusive Low-Pro swing arms are engineered for ultimate versatility—with telescoping channels and a dropped-end pad receiver, these arms excel in servicing lowered chassis-height vehicles to provide easy access to challenging lift points while minimizing the risk of damage to vehicle side skirts, running boards, and ground effects * Height stackable adapters and two-stage spin-up screw pads offers superior vertical pad placement for secure vehicle support—customizable precision with screw pads and adapters achieve impeccable lifting alignment with double-telescoping screw adapters featuring polyurethane pads resistant to gouges and tears * Adaptability of pads ensures level lifting across all conditions—optional 2.5 in. and 5 in. stackable adapters enhance vertical pad placement for precise and secure vehicle support—with a seamless drop-in design, quick and efficient usage is guaranteed, complemented by organized and secure storage on column-mounted racks * BendPak's patented automatic safety lock system is designed for seamless engagement during lift rising and effortless release during descent—this system streamlines operator actions, enhancing overall safety and workflow
Not Yet Reviewed
$6,595.00
BendPak HD-9ST narrow width car lifts are rugged, space-saver solutions with a 9,000 lb. lifting capacity. They are great for the DIY projects and daily shop work at small businesses. These BendPak lifts are designed for shops or garages where space is a premium. Trust in BendPak for all of your lifting needs. Additional features include the following: * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push button pneumatic safety release * Independent backup slack cable safety latches * Removable approach ramps for additional drive under clearance * Longer approach ramps for additional drive under clearance
( 7 )
$5,995.00
The BendPak HD-9XL 4-post lifts are about the size of a typical parking space, maximizing valuable floor space. These BendPak lifts are ideal for storing cars and trucks, ATVs, snowmobiles, jet skis, golf carts, boats, or anything else that needs to be up off the ground and safely in the air. If you've got at least a standard 8 ft. ceiling, you'll be able to make use of that wasted vertical space above your car. Trust in BendPak for all of your lifting needs. Additional features include the following: * 9,000 lb. maximum lifting capacity * Wide drive-thru with standard lift height and long runways * Electric/hydraulic power system * Internal "anti-sway" slider blocks in each column * Heavy-duty 3/8 in. aircraft cable * Multi-position safety locks in each column * Ramps feature non-skid surface * Runways include rail-kit for optional accessories * Single hydraulic cylinder underneath runway * Oversized self-lubricating cable rollers * Rugged 1 1/4 in. roller axles * Adjustable lock ladders * Push-button pneumatic safety release
( 3 )
$6,295.00
The BendPak 10APX-181 Series 2-post lifts offer exceptional direct-drive lifting performance with the convenience of wide or narrow installation, wrapped up into one configurable package. These 2-post lifts are engineered to cater to mechanics who spend their days in challenging positions. Say goodbye to discomfort and hello to a premium workspace that accommodates technicians with the best equipment for the job—especially for those tackling larger vehicles. True to the 10AP Series, these lifts feature a robust 10,000-lb. lifting capacity, an expandable top beam, and BI-METRIC arms to suit virtually every vehicle lifting requirement—symmetric or asymmetric. The simple, yet highly sophisticated design of the 10APX-181 Series lifts keep service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. Equip your shop with the latest in lifting technology from BendPak—and experience the difference firsthand. Key features and specs: * High tensile-strength steels, low-profile arms, and meticulously designed swing arms reflect BendPak' commitment to safety-critical enhancements, empowering technicians to tackle heavier EVs with confidence * Lifts are not only sturdy and secure but also equipped with BendPak's advanced BI-METRIC arms, capable of seamlessly performing symmetric and asymmetric lifting * Uniquely designed BI-METRIC adaptable swing arms offer exceptional flexibility to empower users to configure their lifts symmetrically or asymmetrically, without the need for arm switching—2-in-1 design accelerates vehicle servicing, enabling techs to work more efficiently * Revolutionary Automatic Swing Arm Restraint System (ASARS), engineered to endure the elevated forces exerted during vehicle service—this patented system, constructed with heavily forged steel, locks lift arms securely in place with an impressive load-holding force of over 2000 lbs. * BendPak's patented triple-telescoping swing arms redefine precision lifting offers greater retraction and extension capabilities—patented nesting feature enables seamless inner sliding arm movement, eliminating hindrances and ensuring maximum efficiency in vehicle lifting * Exclusive Low-Pro swing arms redefine versatility, featuring telescoping channels with a shorter profile and dropped-end pad receivers (arms are engineered for optimal under-car access on lowered chassis-height vehicles to minimize the risk of damage to vehicle skirts, running boards, and ground effects) * Stackable adapters and spin-up screw pads provide secure vertical pad placement * Experience flawless lifting alignment with optional double-telescoping screw adapters, fortified with resilient polyurethane pads—these adapters ensure level lifting in all conditions, enhancing technician safety * Optional 2.5 in. and 5 in. stackable adapters further optimize vertical pad placement for secure vehicle support * Patented automatic safety lock system redefines safety and efficiency—designed for automatic engagement during lift rising operations, this system also boasts an ergonomic single-point release for effortless lock disengagement during lift descent
Not Yet Reviewed
$7,495.00
On Sale
BendPak HDSO-14P 4-post open front car lifts allow easy entry and exit beneath a vehicle. They're available with optional drive-thru ramps, drip trays, and rolling jacks. These lifts feature clear entry upfront, providing convenient vehicle access. The lifting capacity and extended runways allow you to service a wide variety of vehicles, ranging from small cars to full-size trucks. Additional facts and specs: * 14,000 lb. lifting capacity * CE approved and certified * Huge cable sheaves reduce wear and tear * Longer approach ramps for low ground clearance vehicles * Electric/hydraulic power system * Runways adjust for different tread widths * Automatic leveling system with multiple auto-leveling locking positions * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Multi-position safety locks in each column * Includes fully adjustable lock stops for precise leveling
Not Yet Reviewed
$10,995.00
$10,545.00
BendPak HD-14TL tall car lifts are designed to give you the versatility of a heavy-duty lift with an extra foot of clearance. Able to support 14,000 lbs. and provide 82 in. of rise, they double as high-clearance parking solutions when your car collection needs to double up in the garage. With automatic safety locks and a secondary lock system, these BendPak HD-14TL lifts are secure hydraulic lift or storage options for your vehicle. Features include: * Long-style approach ramps for low ground clearance vehicles * Runways include rail-kit for optional accessories * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Pneumatic push-button safety release * Heavy-duty 1/2 in. aircraft cable * Safety locks enclosed in columns minimize pinch points * Hardened-steel sheaves with self-lubricating bearings * Multi-position safety locks in each column * Customizable power unit location * Approach ramps incorporate built-in rear-wheel chocks * Independent backup slack-cable safety latches * Runways feature non-skid surface
Not Yet Reviewed
$8,062.99
With shorter length and extra height, the BendPak HD-7P short runway extra-tall car lifts are the ultimate in compact convenience when you want the lifting power of a lift in a tight space. They are the perfect service lift for shops with limited floor space or a home carport. The HD-7Ps require no special foundation or complicated installation and are about the size of a typical parking space. Additional features include the following: * 7,000 lbs. maximum lifting capacity * High lift with short runways * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * High-speed lifting * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Ramps feature non-skid surface * Push-button pneumatic safety release
( 1 )
$6,595.00
On Sale
BendPak P-900LT low-mid-rise lifts are heavy-duty. With increased lift capacity of 30 percent over past models, they maintain all the features you love—like the dual-approach design, open-center access, and a hands-free safety check. This is the industry's ultimate pit lift, perfect for quick-lube shops, full auto centers, and home garages. The P-900LT offers a minimal footprint and full access to the wheels and undercarriage. Ramps detach quickly to convert a flush-mount unit to a floor unit. Additional facts and specs: * 9,000 lb. capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick setup
Not Yet Reviewed
$6,995.00
$6,495.00
Using long-wheelbase vehicles as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lifts to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their open-center design, just like their standard length MDS-6LP and MDS-6LPF models. The MDS-6EXTF extended-length, flush-mount, mid-rise lifts provide quick-lube stations looking to install a car lift flush over work pits. If your shop wants to be ready for longer-wheelbase vehicles and minimize the lift's footprint, you can't do better than BendPak's MDS-6EXTF mid-rise open-center car lift. Key features: * 6,000-lb. lifting capacity * Open-center design/flush-mount * Adjustable arm assemblies * Solid-steel safety lock bars * Multiple lock positions * Hinge-point with Zerk grease fittings * Low-profile design * Rubber blocks included * Removable ramps
Not Yet Reviewed
$8,195.00
The design of BendPak HDSO-14AX alignment extended open-front lifts makes it easier to access the front turn plates and undercarriage. These vehicle lifts feature an alignment system that has front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. The car lifts are available with optional drive-thru ramps, drip trays, and rolling jacks. Additional facts and specs: * 14,000 lb. lifting capacity * CE-approved and certified * Automatic leveling system * Multiple auto-leveling locking positions * Runways include rail kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal "Anti-Sway" UHMW slider blocks in each column * Features oversize sheaves and heavy-duty 1/2 in. aircraft cable * Rugged 1 3/8 in. roller axles and oversized self-lubricating cable sheaves * Runways adjust for different tread widths and feature non-skid surface
Not Yet Reviewed
$14,395.00
Unlock your shop's full potential with BendPak V-Max Elite air compressors. The extreme-duty 4-cylinder pumps are engineered to operate at maximum efficiency under all load conditions. The compressors have rugged 2-stage, 100 percent cast iron pumps that feature splash lubrication and a V-4 finned cylinder configuration. These enhancements result in total reliability and 360 degree cooling. Heavy-duty, disc-type valves are dependable and accessible without even having to remove the cylinder head or other needlessly complicated valve maintenance procedures. A built-in intercooler and air-cooled aftercooler chill the air, reducing both heat and moisture from condensation. The compressors run quiet due to significantly slower pump rpm speeds and energy-efficient pumps. Additional features of BendPak V-Max Elite air compressors: * Cast iron pump and heads * Dual belt drive for less load on bearings * Fully enclosed belt guard * ASME-rated tank * Large surface cooling fins * Oversized ductile iron crankshaft * Tapered roller main bearings * Precision-balanced flywheel * Magnetic starter * Cast iron oil reservoir with large oil drain and sight-gauge glass
Not Yet Reviewed
$5,195.00
—
$7,295.00
BendPak 1302BA-302 digital pipe benders include BenPak's Deluxe 302 die package. Their 1302BA Series of pipe benders feature an ergonomically placed and highly sophisticated keypad display that can record bending patterns for accurate and repetitive use. In extremely busy shops, these automatic pipe benders will save time and make it easy to duplicate results. Features include: * 2 separate end-finishing units at rear for all necessary flaring and expanding * Knee control and depth-of-bend degree plate for manual bending operations * Comes complete with quick-release bending and finishing dies * Includes high-speed clampless swager and internal expander * Easy-to-use drop-in collar makes swaging operations quick and efficient * Twist-lock tooling * Integrated power-relief control valve * Pass-through cylinder stem passes completely through the primary frame * Rigid 6 in. x 6 in. x 3/8 in. welded-steel tube frame * Commercial-grade hydraulic cylinders * All cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards * Quick-release bending dies for reduced set-up times * Bending heads precision grounded to within .002 in. * Enclosed controls keep your bending area clutter-free * 2.5 in. oversized barrel shafts for maximum dependability and minimum maintenance * Standard grease fittings allow for simple lubrication * NEMA-rated on/off switch box incorporates overload relays that automatically disrupt power supply should an unforeseen over-current situation occur * Pressure gauges let you know exactly what the system pressures are at all times * Industrial grade casters help you easily move the bender around your shop * Adjustable pressure valve located right up front * One-piece barrel ensures that the bending gates stay perfectly aligned with the ram * Heat-treated tooling for greater service life * Convenient tool trays keep your tooling organized * Strong, 5 hp Baldor energy efficient motor delivers maximum performance * Direct-drive, high-speed, 4 gpm pump * Single enclosed bottom cylinder applies pressure evenly to the back gates and, because it is hidden, does not interfere with the tubing * Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination * Canister oil filter in the hydraulic system keeps the oil nice and clean * Oil sight-gauges allow you to visually inspect oil levels * Oversized 1/2 in. high-pressure hose provides better speed and cooling * Open-sided swager box allows for easier access and reduces the chance of "crashing" tools and damaging the cylinder
Not Yet Reviewed
$13,595.00
The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations. Product specs and advantages: * Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required * Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work * Ganged column design allows multiple installations in minimum space * Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg) * Galvanized and corrugated anti-slip platform * Freestanding design when ganged two or wide * Overhead power unit provides smooth quiet hydraulic operation * Platform can be stopped at different heights to fit various vehicles and ceiling heights * Full-width channel-locked center panels protect lower vehicle * Wide deck platform accommodates pickups, vans, and cars * Dual direct-drive hydraulic cylinders * Automatic safety lock combined with anti-fall device to hold platform securely * Virtually maintenance-free composite carriage bearings * Electric key switch for security and safety * Automatic shut-off when operator releases key switch * Manual lock release available in case electricity failure (optional) * Hydraulic overloading protection * Photocell sensor prohibits lift to be lowered if vehicle is parked below Safety features: * Mechanical safety locks are spaced every 4 inches * 24 V operator controls and lock release * Photocell sensor prohibits lift to be lowered if vehicle is parked below * Electric protection for power overload or improper voltage * Automatic locking system during power outage * Emergency stop button * Upper limit switch * Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting * Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Not Yet Reviewed
$9,395.00
BendPak 10APX Pro Series 2-post lifts are designed for mechanics who constantly deal with working in uncomfortable positions on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., providing ample room to work comfortably with top-tier equipment. Like the rest of the Pro Series, these powerful units feature a 10,000 lb. lifting capacity, Low-Pro arms, Bi-Metric arms, and more. Pro Series two-post lifts boast a revolutionary design that combines the finest qualities of today's lifts into a new car lift engineering concept. The result is a lift unlike any other, purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency. * Experience the ultimate convenience with the Pro Series, offering both wide and narrow installation options in one customizable package. * Built to last, these versatile lifts ensure durability, safety, and reliability for all your automotive needs. * Improved under-car access thanks to the low-profile arms and extra-wide column spacing. Critical load-holding components are crafted from high tensile-strength steels, allowing greater telescoping movement in swing arms and tube profiles tailored for low ground clearance vehicles and outer-positioned EV lifting points. * Electric vehicles require specialized lifts to safely manage their increased weight from added batteries, reinforced frameworks, suspension systems, and protective metal armor. The Pro Series is designed to meet these demands with reinforced construction and purposefully engineered features, making it the perfect solution for EV service. * The Pro Series boasts a revolutionary Automatic Swing Arm Restraint System (ASARS), designed specifically for heavy vehicle service, setting a new standard in the industry. Engineered to withstand the rigorous pushing and pulling forces encountered during servicing, this system features a complete 360-degree load-holding grip. Its heavily forged-steel design delivers over 2,000 pounds of load-holding force, ensuring secure arm placement and preventing unintended movement during lift use and vehicle servicing. * The Pro Series also introduces revolutionary and patented swing arms tailored for accommodating a wide variety of vehicle lifting points. Unlike traditional lift arms, Pro Series arms retract shorter and extend farther, providing lift operators with extensive positioning options. * BendPak's exclusive Low-Pro swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers. This design facilitates easier access to lift points on lowered chassis-height vehicles, reducing the risk of damage to vehicle side skirts, running boards, or ground effects. * The Bi-Metric adaptable swing arms are another exclusive feature, allowing users to load vehicles symmetrically or asymmetrically without needing to switch arms. * When it comes to lifting full-sized trucks or SUVs onto a two-post lift, you can't cut corners. Reduce your risks with BendPak's Frame Cradle Pads, ensuring your vehicle stays securely in place during every lift operation. The heavy-duty steel and thick polyurethane rubber pad lining provide durability and protection. * For even more functionality, you'll love the BendPak WSA-100 Work Station. This industrial-grade utility station integrates air and electric capabilities into your two-post or four-post lift seamlessly, boosting the efficiency of your shop—with four electrical outlets and two specialized air service outlets, one for lubricating air for tire inflation and another for clean air for pneumatic tools.
Not Yet Reviewed
$7,845.00
On Sale
BendPak HDS-18EA heavy-duty extended ramps alignment truck lifts are engineered to make light work out of heavy lifting. They're built to last and feature upgrades that increase safety, durability, and productivity. These are the lifts that graduate from the class of mid-size trucks, vans, and SUVs—up to heavy-duty applications! They are professional truck lifts that can even handle some industrial and farming equipment. Additional facts and specs: * 18,000 lb. lifting capacity * Multi-caster slip plates * Includes 48 in. extended steel approach ramps * Supersized 12 in. diameter cable sheaves * Stainless steel lifting cables * Integrated flow restrictor * Durable powdercoat finish * Spring-loaded safety locks * Second lock system on constant guard * Full enclosed lifting cables * Multiple adjustable height locking positions * Maintenance-free electric hydraulic power system * 12 in. x 12 in. base plates
Not Yet Reviewed
$25,195.00
$24,495.00
BendPak's PCL-18B cross beams for their portable column lifting systems connect two mobile column lifts, allowing you to lift most heavy-duty commercial vehicles safely and securely. Featuring single-piece construction, these chassis support beams have rugged stainless steel frames with a rust-, chemical-, and abrasion-resistant finish. Each BendPak cross beam has an 18,000 lb. capacity and lifts vehicle from the chassis frame, giving you complete wheels-free access to perform a variety of wheel maintenance.
Not Yet Reviewed
$5,595.00
On Sale
BendPak HDS-27 standard length 4-post truck lifts rely on bigger sheaves, beefier components, and a legacy of dependability to get your 27,000 lb. heavy-duty vehicle up in the air. They feature super-sized 12 in. diameter cable sheaves within the runway, plus cross tubes combined with massive 4 in. diameter sheave axles--dramatically improving cable wear and critical component lifespan. This means increased safety and less money spent on service-related expenses down the road. Trust in BendPak for all of your lifting needs. BendPak HDS-27 standard length 4-post truck lift features include: * 27,000 lbs. lifting capacity * Stainless steel lifting cables * Grease fittings * Single hydraulic under-runway cylinder * Spring-loaded safety locks * Second lock system on constant ground * Fully enclosed lifting cables * Multiple adjustable-height locking positions * Maintenance-free electric/hydraulic power system * Conveniently positioned operator controls * 12 in. x 12 in. base plates * Non-skid runways
Not Yet Reviewed
$23,495.00
$22,545.00
BendPak HDS-14LSXE alignment extended lifts are designed and engineered to meet the strenuous demands of even your toughest professional lifting jobs. They feature aircraft-quality stainless steel and aluminum pneumatic cylinders that release all four locks simultaneously with the simple push of a button. BendPak manufactures these lifts from high-quality materials, ensuring years of trouble-free performance. Trust in BendPak for all of your lifting needs. Additional features include the following: * 14,000 lb. capacity * Heavy-duty turn plates and integrated rear slip plates * Multi-position turn plate pockets * Automatic leveling system * Multiple auto-leveling locking positions * Runways include rail kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized sheaves and heavy-duty 1/2 in. diameter aircraft cable * Rugged 1 3/8 in. roller axles and oversized self-lubricating cable sheaves * Runways adjust for different tread widths and feature non-skid surface
Not Yet Reviewed
$13,095.00
On Sale
BendPak's HDS-Truck Series 4-post lifts are a whole new breed of rugged lifts. They're newly engineered super-duty truck lifts that make light work out of heavy lifting. They work better, are built to last, and feature upgrades that increase safety, durability, and productivity. Each BendPak HDS-Truck Series 4-post lift is equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The hydraulic cylinder features high-Durometer rod seals, pressure-loaded U-cup piston seals, backups, and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from high-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth cylinders that will provide years and years of dependable, trouble-free service. Additional features include the following: * 40,000 lb. lifting capacity * Super-sized 12 in. diameter cable sheaves * Stainless steel lifting cables * Extended length runways * Grease nipples * Single hydraulic under-runway cylinder * Durable powder coat * Spring-loaded safety locks * Second lock system on constant guard * Fully enclosed lifting cables * Multiple adjustable height-locking positions * Maintenance-free electric hydraulic power system * Conveniently positioned operator controls * 12 in. x 12 in. base plates * Non-skid runways
Not Yet Reviewed
$35,995.00
$34,445.00
The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
Not Yet Reviewed
$8,295.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
