Availability
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel
( 2 )
$5,866.99
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$5,398.99
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
ATK High Performance GM 383 Stroker 415 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 415 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * Scat nodular iron crankshaft * Scat I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$6,098.99
Bring your ride to life with ATK High Performance Ford 302 370 hp Stage 3 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * Quick Fuel 680 cfm carburetor with vacuum secondary's and electric choke * Mechanical 80 GPH Fuel pump Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$6,674.99
ATK High Performance GM 383 Stroker 500 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 500 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * 4340 forged crankshaft * 4340 forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
Not Yet Reviewed
$8,198.99
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
ATK High Performance Pro Street 632 c.i.d. 800 hp completely dressed crate engines are sure to turn heads! Hand built; they are stuffed with name brand quality components you can trust to ensure performance. Engine specifications: * Block: Dart Big M 10.2 deck, 4-bolt main, 2-piece seal * Bore/stroke: 4.600 in. x 4.750 in. * Displacement: 632 * Crankshaft: Scat 4340 forged internal balance * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.3:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 267/277 at 50 .680 intake/.680 exhaust 110LSA * Timing chain: Double roller * Cylinder heads: Dart Pro 1 aluminum 121cc/345cc 2.300/1.880 * Rocker arms: Howards billet aluminum 1.7 roller rockers * Oil pan: Moroso 7 qt. street/strip pan with windage tray * Oil pump: Melling high volume * Balancer: Power Bond SFI 7.950 in. * Intake manifold: Edelbrock Super Victor * Distributor: Pro billet (iron gear) * Carburetor: Quick Fuel 1150 cfm mechanical secondary * Spark plugs: Autolite #3934 * Spark plug wires: 8mm
Not Yet Reviewed
$16,499.99
If you don't have the time or means for a build, ATK High Performance Ford 347 Stroker Stage 3 long block crate engines are the answer. They'll help anyone looking for a complete motor with reliable, on-street high performance. These fully-dressed (Stage 3) engines work with power accessories, produce a noticeable idle, and include all the Stage 2 components. They may also add in the following parts (among others): carburetion, filters, and spark system. ATK Ford 347 Stroker 450 hp Stage 3 long block crate engines specs: * 440 lbs.-ft. torque * Seasoned OE roller block * 4.040 x 3.400 bore/stroke * 347 c.i.d. displacement * Nodular iron crankshaft (3.400 in. stroke; one-piece externally balanced; 28 oz.) * 4340 forged I-beam connecting rods (5.400) with ARP bolts * Forged flat-top pistons with four valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 231/235 duration at 0.050, 0.544 in./0.565 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart Pro 1 aluminum cylinder heads with 58cc/195cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. front sump OE oil pan * 430 lbs.
( 1 )
$8,099.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
