Availability
ATK High Performance Chevy 632 short blocks are based on dyno proven combinations built with name brand parts. Each short block is hand-built and inspected for precision tolerances. Rotating assemblies are balanced; and stroker builds are oversize of stock bore and stroke. Short blocks are shipped strapped on a wooden pallet crate. Engine Specifications: * Block: Dart Big M Sportsman 4-bolt main 2-piece rear main seal * Bore/Stroke: 4.600 in. x 4.750 in. * Displacement: 632CI * Crankshaft: Scat 4340 forged internally balanced * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: 2618 forged +3.4cc flat tops * Compression ratios: 112cc = 11.3:1 / 118cc = 10.8:1 / 121cc = 10.6:1 (can vary due to deck height/gasket thickness) * Rings: Plasmamoly * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer: Internal balance * Flexplate / Flywheel: Internal balance * Head gasket: .038 in. or per application Engine Info: * Oil: 10W30 Conventional / Non-Synthetic for first 3,000 miles * Oil filter: Wix or K&N per application * Head gaskets: .038 in. or per application
Not Yet Reviewed
$7,526.99
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
ATK High Performance Chevy Gen V LT1 416 short blocks are built for naturally aspirated engines, boost or nitrous. ATK starts with a new GM LT block and outfits it with a Manley 4340 forged crankshaft, H-beam rods with ARP2000 bolts, Manley 2618 forged pistons, and Total Seal CS AP ring package with steel top rings. These short blocks will have the factory piston squirters plugged. Engine Specifications: * Block: New GM LT1/LT4 * Bore/Stroke: 4.065 in. x 4.000 in. * Displacement (cu.in): 416 c.i.d. * Crankshaft: Manley 4340 forged 58-tooth reluctor wheel * Rods: Manley 4340 forged H-beam 6.125 in. ARP 2000 bolts * Pistons: Choice of 2618 forged +10cc or +20cc dished * Rings: Total Seal CS AP steel top ring with Napier 2nd ring set * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed Recommended components: * Balancer -- Internal balance * Flex plate / Flywheel -- Internal balance * Head gasket: .051 in. or per application * Oil pump: Factory Engine Info: * Oil: 5W30 non-synthetic for first 3,000 miles * Oil filter: Wix or K&N, per application
Not Yet Reviewed
$6,998.99
Start your build with ATK High Performance Ford 347 Stroker Stage 2 long block crate engines. They'll help anyone looking to complete their build with reliable, on-street high performance. These mid-dressed (Stage 2) engines work with power accessories, produce a noticeable idle, and may include (among other parts) an intake manifold, distributor, water pump, front damper, and flexplate. ATK Ford 347 Stroker 450 hp Stage 2 long block crate engines specs: * 440 lbs.-ft. torque * Seasoned OE roller block * 4.040 x 3.400 bore/stroke * 347 c.i.d. displacement * Nodular iron crankshaft (3.400 in. stroke; one-piece externally balanced; 28 oz.) * 4340 forged I-beam connecting rods (5.400) with ARP bolts * Forged flat-top pistons with four valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 231/235 duration at 0.050, 0.544 in./0.565 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart Pro 1 aluminum cylinder heads with 58cc/195cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. front sump OE oil pan * 375 lbs.
Not Yet Reviewed
$7,364.99
If you don't have the time or means for a build, ATK High Performance Ford 347 Stroker Stage 3 long block crate engines are the answer. They'll help anyone looking for a complete motor with reliable, on-street high performance. These fully-dressed (Stage 3) engines work with power accessories, produce a noticeable idle, and include all the Stage 2 components. They may also add in the following parts (among others): carburetion, filters, and spark system. ATK Ford 347 Stroker 450 hp Stage 3 long block crate engines specs: * 440 lbs.-ft. torque * Seasoned OE roller block * 4.040 x 3.400 bore/stroke * 347 c.i.d. displacement * Nodular iron crankshaft (3.400 in. stroke; one-piece externally balanced; 28 oz.) * 4340 forged I-beam connecting rods (5.400) with ARP bolts * Forged flat-top pistons with four valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 231/235 duration at 0.050, 0.544 in./0.565 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart Pro 1 aluminum cylinder heads with 58cc/195cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. front sump OE oil pan * 430 lbs.
( 1 )
$8,099.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel
( 2 )
$5,866.99
Smash the competition or terrorize the street with ATK High Performance GM 540 660 hp Stage 3 long block crate engines. They are built around a rock-solid bottom-end and a free-breathing top-end to create a beast that is capable of 660 hp and 690 ft.-lbs. of tire-shredding power. ATK hand-assembles each of these mills out of top-of-the-line components to make them strong enough for the track, but reliable enough for street use, so you get the best of both worlds. ATK GM 540 660 hp Stage 3 crate engines include: * Dart Big M block * High performance aluminum cylinder heads * Intake manifold * Carburetion * 4340 forged steel crankshaft and H-beam connecting rods * Forged pistons * Hydraulic roller camshaft * Cam lift- .640 int./.640 exh. * Cam duration @ 0.50- 243 int./249 exh. * 10.0:1 compression * Distributor, plug wires, plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
Not Yet Reviewed
$14,998.99
Bring your ride to life with ATK High Performance Ford 302 370 hp Stage 3 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * Quick Fuel 680 cfm carburetor with vacuum secondary's and electric choke * Mechanical 80 GPH Fuel pump Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$6,674.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
