Availability
Showing In Stock Items. Show All 22 Items.
TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times. They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.
( 21 )
$854.95
—
$1,127.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
ACC Performance LS Wild Boar Outlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9.60 in. in diameter and have stall speeds ranging from 2,800 to 4,2000 rpm.
( 1 )
$819.76
—
$1,089.79
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
—
$1,049.95
ACC Performance Wild Boar Oultlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9 1/2 in. in diameter and have stall speeds ranging from 2,400 to 5,000 rpm.
( 2 )
$753.39
—
$998.94
ATI Super Pump front pumps are CNC-machined from billet aluminum or permanent-mold aluminum castings for precision and durability. Re-engineered lubrication circuits allow for increased flow volume in all critical areas. ATI increased the thickness of the pumps to improve oil pressure and volume at low rpm, resulting in a cooler-running transmission and converter. Features: * Superior pressure * Improved trans-brake hold * Prevents stator tube spinout
( 4 )
$768.99
—
$1,009.99
The transmission valve body, or simply valve body, is a crucial component for the proper function of your automatic transmission. Consisting of valves, solenoids, and hydraulic passages, the valve body controls the flow of fluid, directing it where it needs to go for smooth, positive gear changes. GearStar automatic transmission valve bodies efficiently direct fluid to the necessary components, keeping your gear changes precise. They are highlighted by strong billet aluminum construction and available with or without trans-brake. Select the one needed for your transmission.
Not Yet Reviewed
$950.00
Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display
Not Yet Reviewed
$1,098.99
FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual
Not Yet Reviewed
$799.00
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$777.95
—
$1,049.95
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 31 )
$758.99
—
$994.99
Hughes knows that the most important factor in performance driving is how your car leaves the starting line. These Competition 40 Series converters are exclusively designed for the serious racer. The replacement of the fiber thrust washers with heavy-duty needle bearing packages enables these converters to be run on the street, but they're recommended just for strip use. They'll get you the torque you need, when you need it, to get you off the line and on your way to the winner's circle.
( 3 )
$887.99
—
$1,040.99
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$792.99
—
$1,010.99
How did Dedenbear's Command Center delay boxes earn such a lofty title? Just check out all of the features jammed into this compact little box command center and you'll see for yourself! Features include: * Four types of delay boxes * Two separate 4-stage throttle stop timers * Independent starting line output * RPM activated switch * Digital tachometer * Pro/Full tree button, to race a different class at the touch of a button * Lighted display * Lighted keypad with number and scroll keys * Highest amperage output capabilities * Instant memory * How-late feature * Crossover compensation * Last-chance feature
Not Yet Reviewed
$829.99
All Hughes Performance Pro Competition 45 Series converters have a full needle bearing replacement of fiber washers. Special silicon spot brazing on top and bottom adds strength and reliability. Hughes installs a premium-built sprag assembly and a specially machined stator in these converters, giving you the performance edge you need off the line.
( 3 )
$1,034.99
—
$1,052.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
