Free Shipping on Orders Over $109 at Summit Racing

Access SnowSport Electric Plow Winches

Feel the power, experience the performance! Access SnowSport electric plow winches ensure your snow removal will be quick and efficient. Use the included in-cab switch to lower and raise the plow blade while remaining inside your comfortable, heated cab. Durable corrosion-resistant construction, a heavy-duty synthetic cable, and high-output motor exceed all expectations. These electric winches maintain the innovative motion-activated design of SnowSport HD and LT utility plows. It's time to have some up, down, all-around fun with a SnowSport electric plow winch.

Not Yet Reviewed

$836.85

Painless Performance 21-Circuit Direct-Fit Jeep CJ Harnesses

Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump

4.9 out of 5 stars ( 29 )

$899.99

Kolpin Doors

Kolpin's new hard cabs for UTVs are state-of-the-art attention-getters designed for great visibility and year-round use. These cab doors can turn your UTV into a true four-season beast! The doors feature heavy-duty powdercoated steel tube frames with 5mm thick scratch-resistant polycarbonate door panels, two grease point EZ door removal hinges that mount to the Kolpin hard cabs, and tempered glass sliding windows with a lockable latch. These lockable doors are key-matched and have automotive-type weatherstripping to keep them weather-tight. The doors seal so well, they can even be kept in place when towing your UTV on a trailer, blasting through the mud, or pulling your trailer behind your rig. Whether you're piecing together your cab or need to replace damaged parts, Kolpin doors make for incredible all-around runners!

4.8 out of 5 stars ( 5 )

$874.99

Fab Fours Black Steel Rear Bumpers

Fab Fours Black Steel Series rear bumpers provide ample protection to your truck's rear-end and tailgate, while flashing an intimidating look to drivers following behind. These tube and 14-gauge steel tread plate bumpers have a 2-stage black powdercoat for corrosion resistance. They feature reverse light cutouts and lights, as well as back-up sensor holes with grommets and plugs (where applicable). The step-style bumpers allow use of factory trailer hitches, while the tread plate ensures better traction. Whether you want matching styled bumpers front and back—or simply desire excellent rear protection—Fab Fours Black Steel rear bumpers won't let you down. Order the model designed to fit your application.

5.0 out of 5 stars ( 2 )

$871.67

—

$968.58

TeraFlex RockGuard Basin Bumpers

TeraFlex RockGuard Basin rear bumpers complement your Jeep's body while offering the ultimate rock protection as it pushes over rocks and obstacles. These rear bumpers feature robust steel construction with a durable textured black powdercoat finish, and the installation is 100 percent bolt on. Additional features: * Recessed spare tire well accommodates up to a 42 in. spare tire * Clears rear 42 in. tires * Features recessed mounting holes for vehicles with ParkSense sensors * Includes rubber plugs for vehicles without ParkSense * Features two D-ring mounts * Retains factory trailer hitch and wiring * Lifetime warranty on bumper defects; 90-day warranty on powdercoat finish

Not Yet Reviewed

$863.24

Fishbone Offroad Rockfish Rear Bumpers

Give your Chevy Silverado or GMC Sierra a utility upgrade with a Rockfish rear recovery bumper from Fishbone Offroad. It retains your factory trailer connector, backup sensors, and license plate lights—and provides much-needed steps to allow easy access to your truck bed or utility rack, as well as slots for two 3x3 in. pod lights. Rockfish is perfect for any workhorse or a neighborhood tailgater! Order the model designed to fit your truck. Additional details: * Easy bolt-on design * 3/4 in. D-ring mounts * Works with all OE sensors, brackets, and lights * Black textured 2-stage powdercoat * 1/8 in. steel fabrication with 1/4 in. reinforcements * Built-in step on both sides * Works with most 2 in. tow hitches * Blind spot monitoring system compatible * Dual and single exhaust compatible * Wire tabs welded inside of bumper to retain factory wire routing

5.0 out of 5 stars ( 1 )

$799.99

Go Rhino BR20 Bumpers

Go Rhino BR20 bumpers are aggressive, modern-looking replacements for your truck. Laser-designed to form fit the rear contours of each specific vehicle, these steel units are black or texture powdercoated for long-lasting performance. They feature integrated steps for easy access to your bed, 1 in. D-shackle mounts, and optional 3 x 3 in. LED light mounts (lights not included). BR20s are compatible with your OE trailer plug and license plate lights. Also included are a reverse sensor mounting port, and a port to allow access to your spare tire crank. Order the Go Rhino BR20 replacement bumper engineered for your truck!

Not Yet Reviewed

$943.49

ARB Outback Solutions Modular Roller Drawer Systems

Completely modular, the ARB Outback Solutions range of roller drawer systems can be individually tailored to your needs and vehicle. Exclusive to ARB and suitable for many vehicles—including SUVs, pickups, and trailers—these systems can also be used in non-vehicle applications such as sheds and warehouses. Three types of modules are available: roller drawer, roller floor, and roller drawer with roller floor. They're offered in a range of sizes, resulting in more than 200 possible configurations. Customize your vehicle or storage area! Additional product details: * Engineered for both on and off-road driving with anti-rattle design * Key lockable, push-pull slam shut latches for ease of use and maximum security * Long-lasting, UV-stable commercial carpet designed to complement modern vehicle interiors * Cross-folded floor ensures maximum support for items placed within each unit. Up to a maximum of 330 lbs. per drawer, 600 lbs. combined * Fully sealed, dust- and water-resistant bearings for superior longevity working in harsh environments * Integrated fridge slides on roller floor models provide a true flat mounting surface * Vehicle-specific side floor kit with easy latches completes installation and provides additional storage areas within the cabin or tray * Water-resistant bonded marine plywood with steel reinforced guards for superior strength sourced from sustainable forests * Folded stainless steel bearing runners for ultra-smooth drawer and slide operation * Self-locking anti-rollback system locks into place at full extension; this holds the drawer from rolling closed even on inclines * Modular units allow greater flexibility if needs change in the future * Class-leading deep drawers with internal heights up to 9.8 in. for greater packing potential

4.0 out of 5 stars ( 1 )

$921.00

On Sale

DV8 Offroad FS-15 Series Bumpers

DV8 Offroad FS-15 Series bumpers provide rugged, heavy-duty protection for Jeep Wrangler (JK/JL) and Gladiator (JT) models, featuring a lightweight yet strong, high-clearance design that improves approach angles for off-roading. These bumpers are engineered for recovery with integrated winch mounts and D-ring mounts, while offering integrated light mounting points. Some bumper styles are designed to retain factory features like the hitch, trailer harness, connector, license plate lights, and parking sensor cutouts. The FS-15 Series bumpers by DV8 Offroad are constructed from durable steel, then are finished in a micro-texture black powdercoat to resist corrosion and come in front or rear bumper options designed for full bolt-on installation on most Jeep Wrangler JL/JT models.

Not Yet Reviewed

$999.99

$899.99

Painless Performance 23-Circuit Direct-Fit Jeep YJ Harnesses

Painless Performance 23-circuit direct-fit Jeep YJ harnesses fit 1987-91 YJ Jeeps. These harnesses feature a factory-style bulkhead connector that mounts the fuse block in the OEM location. Each harness includes all the connectors and terminals needed as well as a detailed manual. Painless harnesses are factory color-coded and labeled for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay * Fuel injection power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Third brake light * Turn signals * Wipers and washer pump (front and rear)

3.75 out of 5 stars ( 4 )

$999.99

Westin HDX Bandit Rear Bumpers

The HDX Bandit rear bumpers from Westin are built to complement the style, precision, and durability of the matching HDX Bandit front bumper (sold separately). Application-specific designs are constructed of 11-gauge steel for strength and durability and feature seamless welded blends and a textured black powdercoat finish. The bumpers are also available in raw finish for your own customization. These "off-road style" rear bumpers are clearly a cut above—unlike the competition, which features an overlapping two-piece design and an ugly weld, which can warp the metal and is prone to rust. The HDX Bandit rear bumpers include two FM6 LED flush mounts and are available with or without rear back-up sensors. Bumpers include hardware and mounting brackets for easy bolt-on installation. Designed for heavy-duty performance, the Westin HDX Bandit rear bumpers are truly in a class by themselves! Select the HDX Bandit rear bumper model needed for your application.

Not Yet Reviewed

$936.99

Covercraft Custom Fit Form-Fit Vehicle Covers

After you're done washing and waxing your favorite set of wheels give them a hug with one of the most luxurious indoor car covers from Covercraft--Custom Fit Form-Fit. These body-hugging vehicle covers have a super soft interior to pamper your fine paint finishes. The outer shell is woven polyester with Lycra/Spandex for stretch and shape retention while the inside fibers are 100 percent cotton terry loop for a fleece-like finish. Covercraft Custom Fit Form-Fit covers will also provide some ding and dent protection while parked in your garage and are highly breathable to prevent vapor and heat from becoming trapped underneath.

5.0 out of 5 stars ( 4 )

$762.99

Westin XTS Rear Bumpers

Westin XTS rear bumpers are engineered to provide robust protection and a rugged look for your vehicle's rear-end. Constructed from high-strength steel with a durable powdercoat finish, these bumpers offer excellent resistance to impacts and harsh weather conditions. They feature a sleek, modern design that enhances your vehicle's off-road capability while maintaining a refined appearance. XTS rear bumpers include integrated steps and mounting points for accessories, making them practical for both everyday use and rugged adventures. Their straightforward installation process ensures a seamless fit—an ideal choice for those seeking durability and functionality in a rear bumper upgrade. Additional details: * Full featured for enhanced utility and functionality * Does not interfere with the original equipment hitch * Integrated recovery shackle mount points * Lower corner rock light mounting points (Rock lights sold separately) * Two off-road jack points * Bolt-on installation, no drilling required * Hardware and mounting brackets included * Made from high-strength 7-gauge steel * Electrostatic base coat ensures long-lasting corrosion protection * Powdercoated black textured finish * Parking sensor compatible * Rear camera relocation hardware included * Corner step plates are included to cover spindle access holes when the swingouts are removed and add a step surface

Not Yet Reviewed

$803.99

—

$919.99

Covercraft WeatherShield HD Vehicle Covers

Don't let Mother Nature get the best of your vehicle; protect it with WeatherShield HD vehicle covers from Covercraft. These heavy-duty, 300 denier vehicle covers are built for maximum performance in the harshest environments. Using a special process to treat the fibers of these superior solution-dyed fabrics, WeatherShield HD not only provides UV opacity, but also repels water and blocks dust, tree sap, and bird droppings, yet remains breathable to allow moisture and heat to escape from underneath. They have a much greater tensile strength to resist tears and gouges and feature double-stitched overlapping seams, neoprene elastic in front and rear hems to keep cover in place, and reinforced, non-scratch grommets with a protective flap for use with tie-down rope. Covercraft WeatherShield HD is great for long-term storage, too.

Not Yet Reviewed

$926.99

On Sale

DV8 Offroad MTO Series Rear Bumpers

DV8 Offroad MTO (Made to Overland) Series rear bumpers ready your vehicle for off-road performance and protection. They are made from strong high-grade steel with paintable aluminum mesh panels and designed to maintain high ground clearance. Key features: * Pod light mounts * Micro-texture powdercoating * 4mm body and 5mm mounts/supports * Reinforced D-ring mounts * Retains factory backup sensors * Paintable perforated aluminum mesh panels

Not Yet Reviewed

$999.99

$899.99

Covercraft Custom Fit WeatherShield HD Vehicle Covers

Don't let Mother Nature get the best of your vehicle. Protect it with custom fit WeatherShield HD vehicle covers from Covercraft. Their heavy-duty, 300 denier fiber construction results in extreme tear resistance and tensile strength. Developed for maximum performance in harsh environments, like intense sun climates and along the coast, a special process is used to treat the fibers of the fabric to provide UV opacity, repel water, block dust, tree sap, and bird droppings, and yet is still breathable to allow moisture and heat to escape from under the cover. These heavier covers have a much greater tensile strength to resist tears and gouges and feature double stitched overlapping seams, neoprene elastic in front and rear hems to keep cover in place, and reinforced, non-scratch grommets with a protective flap for use with tie-down rope. Shield your vehicle from nature's wrath with Covercraft Custom Fit WeatherShield HD vehicle covers.

Not Yet Reviewed

$926.99

16 Results Found For "trailer accessories"