Free Shipping on Orders Over $125 at Summit Racing

Body Parts Radiator Supports

Body Parts radiator supports are aftermarket replacement products for your old or damaged factory units. Keep your radiator secure and your cooling system in tip-top shape with their steel supports parts. An affordable solution for your replacement needs.

4.0 out of 5 stars ( 79 )

$764.99

—

$983.99

OTC Transmission Support Brackets

OTC's automatic transmission adapters are the perfect solution for those hard-to-install transmissions. They're made from durable materials to ensure performance.

5.0 out of 5 stars ( 1 )

$891.99

Harland Sharp Original Roller Rockers

If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.

4.62 out of 5 stars ( 181 )

$999.99

Fleece Performance PowerFlo In-Tank Lift Pump Assemblies

PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.

5.0 out of 5 stars ( 8 )

$761.99

—

$889.00

Body Parts Bumpers

Body Parts bumpers are OE-replacements offering quality and value. These low-cost alternatives provide the proper fit and function to complete your repairs correctly. Body Parts bumpers are available in different materials, finishes, and styles to cover a wide range of applications.

4.48 out of 5 stars ( 21 )

$881.99

—

$903.99

Summit Racing™ MAX-efi 500 Fuel Injection Systems

Summit Racing™ introduces its MAX-efi 500 Fuel Injector System, the most efficient way to convert your carbureted engine to premier EFI performance. These self-tuning throttle body units bolt directly to most 4-barrel manifolds; then, through their wideband oxygen sensor, the systems continually adjust fuel delivery to provide the optimum air/fuel ratio under all climate and altitude conditions. MAX-efi will support up to 500 hp, and the self-learning ECU allows for easy tuning. With safety in mind, these systems are also designed with a self-adjusting "limp home" mode to protect your engine if a sensor fails. In addition, they include a data-logging feature to track the system while it's running to ensure optimal performance. Other features of the Summit Racing™ MAX-efi 500 Fuel Injector Systems: * Powered by the most advanced self-learning technology available * 4-injector system is capable of supporting stock to 500 hp engines * High-flow aluminum throttle body with four 45mm diameter throttle bores * OE-quality wideband 02 sensor and TPS sensor included * Color touch screen hand-held controller * Billet aluminum anodized fuel rails * Compact external ECU for easy mounting * OE-style harness is clearly marked for easy installation and durability in extreme conditions * All sensors except the wideband 02 sensor and coolant temp sensor are integrated on the unit * Uses commonly available sensors for easy replacement if necessary * System uses a Temperature Manifold Absolute Pressure (TMAP) sensor instead of a MAP sensor, reading both air pressure and temperature * Fits square bore or spread bore intake manifolds. (Spread bore manifold requires an inexpensive plate to avoid leaks. See SUM-G1420) * Works with original carb-type distributor, factory-style throttle linkage, and most 4-barrel intake manifolds

4.09 out of 5 stars ( 69 )

$899.99

Evolution S14MCS 14 in.Metal Cutting Mitering Chop Saws

The professional's metal cutting saw, Evolution S14MCS 14 in. metal cutting mitering chop saws deliver the ultimate metal cutting experience.  Featuring the advanced EVOMAX ultra-long-life blade, a powerful EVOMAX intelligent motor, and Evolution's innovative mitering base, the S14MCS saws set a new standard in accuracy, performance, and reliability. These features, along their cold cut technology, provide 4 times faster cuts than abrasive saws, that are virtually spark-free, leaving a burr-free, cool-to-the-touch cut, straight from the saw. Plus, the precise +/-46-degree mitering base allows you to make accurate miter cuts without repositioning your workpiece. You can work efficiently and effectively while maintaining a cleaner, safer workshop with no airborne abrasive dust, thanks to the Evolution S14MCS 14 in. metal cutting mitering chop saw. Features and benefits: * EVOMAX 15-amp intelligent motor with active blade speed optimization extends blade life by up to 30 percent  -- Soft start reduces electrical current spikes, preventing breaker trips, and reduces mechanical stress, extending motor life -- Electronic blade brake stops the blade in seconds for safer, faster working * EVOMAX cermet carbide blade -- Proven to make 3500+ cuts through 4 in. mild steel round tube -- 80 cermet carbide teeth deliver clean, accurate cuts -- Handcrafted in Japan for unmatched quality * Dual sliding front clamps move on three axes to secure any workpiece shape or size * Quick-release clamps and tool-free adjustments for quick saw setting * 3-position cutting head lets you shift the blade path forward for optimized cutting and extended blade life * Shadow line cut guide clearly shows where the blade will cut, making workpiece alignment easy and accurate. Unlike a laser guide, the bright LED works in all environments and will never go out of alignment. * A 1/4 in. steel plate reinforces the fence to prevent flex during heavy clamping * Structural ribs strengthen the base * Convenient onboard hex wrench storage for fast blade changes * Knurled finish on fence and clamp face securely grips workpiece, supports accuracy * Ergonomic horizontal handle and trigger for all-day comfort * 1,100 rpm no-load speed * 10 ft. rubber cord

Not Yet Reviewed

$1,000.00

On Sale

Holley EFI Digital Dash Gauges

Holley EFI Digital Dash gauges are completely customizable, with a variety of gauge and indicator screens that can be programmed to display any parameter you need. They also offer a virtual switch panel, user-defined alarms, configurable shift lights, and can control on-screen playback of your EFI data logs. The Holley EFI Digital Dash gauges measure 7.5 in. wide, 4.625 in. tall, and 1 in. deep, which makes them compact, customizable dashes for use in a variety of motorsports applications. The digital dash gauges feature a low-glare, high-brightness, high-contrast 800 x 480 resolution, a full-color touch screen for easy viewing even in full sun, and plug and play connection to all Holley EFI systems, as well as a weatherproof aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance! Features include: * Quickly toggle between two or more active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel (replaces the need for physical switches) * User-defined alarms for any input * Configurable progressive shift lights and light bar * On-screen playback of EFI data logs * Download and save Holley EFI data logs to external USB memory stick * Expandable internal storage on micro SD card * Flexible mounting options * Support for future USB devices * Upgradable with future software enhancements * Multiple units can be used simultaneously on a Holley EFI system for larger dashboards * Internal 3-axis accelerometer

4.6 out of 5 stars ( 10 )

$921.95

$828.95

Wilwood C10 ProSpindle Kits

Wilwood C10 ProSpindles are designed for custom and competition applications using Wilwood disc brake kits. The ProSpindle kits contain a pair of modular spindles, steering arms, and hub assemblies designed to provide increased strength and braking capacity, along with minimized weight, while incorporating a 2.50 in. lowered stance without affecting steering geometry. Wilwood C10 ProSpindles are constructed from a proprietary grade of forged aluminum. The integrated modular bearing hub assemblies support 5 in. x 4.75 in. and 5 in. x 5 in. bolt patterns, and the ProSpindles provide direct mounting of radial caliper brackets, creating a strong, zero flex platform for brake mounting. Select the kit designed for your vehicle.

4.92 out of 5 stars ( 12 )

$762.39

—

$889.34

Holley Terminator X Engine Control Modules

Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

Not Yet Reviewed

$870.95

Edelbrock VRS-4150 Race and Performance Carburetors

The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires

4.33 out of 5 stars ( 18 )

$827.95

—

$957.95

Derale Hi-Flow Racing Remote Fluid Coolers

Derale is proud to introduce their latest addition to the remote cooler lineup: Hi-Flow Racing remote fluid coolers! These tube-and-fin coolers are precision TIG-welded—and feature the most efficient tube design in the aftermarket, supporting up to 350 psi with minimal pressure drop. The electric fans are IP68 certified (water/dust proof) and designed to perform even under the most strenuous conditions. These coolers are the perfect choice for everything from drag racing to off-road driving! Additional features and benefits include: * Aircraft-grade aluminum cooler design * Dramatically extends engine or transmission life * Designed for puller applications * 20 gpm flow rate

4.86 out of 5 stars ( 7 )

$834.43

—

$987.78

On Sale

MSD Atomic Transmission Control Modules

MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.

3.74 out of 5 stars ( 19 )

$921.95

$828.95

Aeromotive Dual Phantom Fuel Systems

Today's aftermarket world makes it easy to pick up the phone and order 1000 HP for your street car. This has created several challenges for fuel delivery, ranging from hot fuel handling to pump noise. Aeromotive Dual Phantom Fuel Systems have been designed to solve this problem. They come loaded with two Aeromotive Stealth 340 lph fuel pumps, an additional set of electrical bulkheads, and a larger capacity foam and bladder. The pumps provide opportunity for supporting big power (see power ratings below) while remaining OEM quiet. Separate electrical bulkheads allow for an "on demand" fuel system, which reduces the amount of returned fuel and reduces the tank temperature, making vapor lock and cavitation a thing of the past. Also, this feature is a must when a redundant (back up) pump is needed in extreme conditions, such as off-road, desert, and endurance racing. The larger capacity foam and bladder combat fuel slosh while retaining enough fuel to feed the dual pumps. And the best feature is all of this done from your stock tank with no welding or fabrication! Features: * Two 340 lph Stealth fuel pumps * Supports up to 1400 HP EFI with forced induction, 1700 HP EFI naturally aspirated, 1700 HP Carbureted with forced Induction and 2000 HP carbureted naturally aspirated * Black anodized top hat * Four ORB-06 Ports – two supply, one return, one vent * Larger capacity fuel resistant baffle/basket (includes foam and bladder) * Two universal high flow pre-pump filters * Modular design can be cut to height to fit almost any fuel tank * EFI or Carbureted * Turbine pump mechanisms increase durability

4.14 out of 5 stars ( 7 )

$891.99

DiabloSport inTune 3 GM E90/T93 Unlock Kits

The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 8225-R kit includes an industry-leading inTune 3 handheld tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the inTune 3 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. Get power you can feel—with DiabloSport! DiabloSport inTune 3 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck!

3.67 out of 5 stars ( 3 )

$870.95

HP Tuners VCM Suite MPVI4 Credit Pro Packages

HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender

4.33 out of 5 stars ( 6 )

$799.91

DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems

DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting

4.67 out of 5 stars ( 3 )

$869.99

Trail-Gear Rock Assault 9 Axle Housings

Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!

4.33 out of 5 stars ( 3 )

$999.99

MagnaFuel ProStar EFI 750 Swiveling Electric Gear Fuel Pumps

MagnaFuel ProStar EFI 750 swiveling electric gear fuel pumps feature great performance for the high-volume and pressure demands of supercharged and turbocharged applications They can support 2,500 hp and up. Additional features: * CNC-machined, hard-anodized aircraft aluminum * High-torque custom motor with low current draw * Double support bearing * Can be mounted vertically or horizontally * Polymer wear plates for quiet, smooth operation * 17 amps at 45 psi * -10 AN inlet and outlet (fittings not included)

4.8 out of 5 stars ( 5 )

$778.99

—

$851.99

Sparco Evo XL QRT Competition Seats

Sparco Evo XL QRT competition seat features Sparco's patented QRT ultra-light technology that offers an industry unmatched strength-to-weight ratio for fiberglass composite seats. Designed and developed in cooperation with many Sparco-equipped drivers, the seats relaxed back angle contributes to a very comfortable driving position. As the largest non-head restraint seat in Sparco's seat range, the Evo XL is designed to fit drivers with up to a 38 in. waist, yet their slender shoulder supports will help maintain a slim profile for easier installation in more cockpits. Sparco Evo XL QRT competition seat details: * Fiberglass composite construction * Highback, bucket-style design * Anti-wear fabric added to the seat edges improves durability * High-grip material at the shoulders helps keep the driver in place * Thin base cushion for lower driver position * Comfortable split thigh cushion allows independent leg movement * Side mount application * HANS-compatible * FIA-approved

5.0 out of 5 stars ( 2 )

$836.15

BorgWarner AirWerks Series Turbochargers

The passion of power. BorgWarner AirWerks Series turbochargers provide durable, scalable, strong boost for enthusiasts who want a more powerful replacement or customizable turbocharger. Focused on creating exceptionally high engine performance through forced induction technology, they offer faster spool-up at lower engine speeds and powerful boost for top-end performance. The AirWerks Series includes a range of units supporting 120 to 1,875 hp per turbocharger. Depending on unit selected, features may include: * Innovative extended-tip technology delivers the increased airﬂow of a larger compressor wheel with the lower mass of a smaller, low-inertia wheel * Next generation Forged Milled Compressor Wheels (FMW Technology) * 360 thrust bearings for increased reliability at higher turbo pressure ratios * Serviceable twin hydrodynamic journal bearings

4.9 out of 5 stars ( 20 )

$825.99

—

$982.99

Corbeau GTS II Seats

Corbeau GTS II seats are the perfect seats for the daily driver who wants a sporty stock look, while still maintaining aggressive comfort. These anatomically advanced seats were designed with deep and aggressive thigh and kidney supports, reclining backs, and headrests. Their style is timeless and you can allow Corbeau to enhance your driving experience by swapping out your stock seats for these Corbeau GTS II seats. For years it's been a favorite among the Corbeau line and will continue to be for years to come.

4.3 out of 5 stars ( 10 )

$999.00

RaceQuip Composite Full Containment FIA Racing Seats

RaceQuip Composite Full Containment FIA racing seats are Pro Racing designed seats with right and left head supports, extra-tall thigh and hip support, integral deep shoulder and rib bolsters, and they accommodate all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners

5.0 out of 5 stars ( 1 )

$870.95

Weldon DB2025-A Electric Fuel Pumps

Weldon DB2025-A electric fuel pumps offer flow rates to support 880 to 1,400 hp. These high performance pumps provide precise and consistent fuel delivery. The DB2025-A pumps work with both carbureted and fuel-injected engines. Features and specs include: * Self-priming * Pump element is 100 percent tool steel * Bodies are machined from billet aluminum * All billet body pumps are 100 percent serviceable * Breakaway couplings prevent pump/motor damage in the event of contamination * -12 inlet and -10 outlet O-ring ports * Weighs 5.5 lbs. * Fuel injected engines: 1,600 hp at 50 psi (naturally aspirated) 1,400 hp at 80 psi (boosted) * Carbureted engines: 1,800 hp at 7 psi (naturally aspirated) 1,700 hp at 30 psi (boosted) * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels

Not Yet Reviewed

$839.89

209 Results Found For "support"