Free Shipping on Orders Over $125 at Summit Racing

Nitrous Express Stage 6 Nitrous Systems

If you have a carbureted vehicle and you're on a budget or are just getting started, Nitrous Express Stage 6 nitrous systems could be the ideal beginning point. They're tunable to deliver power boosts in six graduated increments, from 50 hp all the way up to 300. That means you can pick one of the lower increases for an engine that's close to stock, and then ramp things up later on when you add forged pistons. Systems include: * Nitrous distribution plate * Supply hose and fittings * Solenoids * Switches * Wiring * Jets * Mounting hardware * Race fuel required for increases above 150 hp

4.0 out of 5 stars ( 8 )

$750.64

—

$992.20

Nitrous Express 4-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

4.0 out of 5 stars ( 3 )

$857.57

—

$957.57

Nitrous Express SAFE Systems

Improve the performance of your nitrous oxide system with one of these Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems. They feature a one gallon, high-strength composite fuel cell that can be mounted in most factory battery trays without modification. The systems are also available with a high-output, internally mounted fuel pump and an adjustable external regulator, making installation quick and simple. When used with gasoline, they can support up to 800 nitrous horsepower. When used with methanol, they will support up to 400 nitrous horsepower. When used with race gas or methanol, the need to retard timing is significantly reduced. Often, on V8 engines using nitrous boosts of 150 hp and above, zero timing retard is required. The Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems reduce the need to upgrade OEM fuel pumps and will completely eliminate pressure drop at the fuel rail in EFI vehicles. They also include an integrated fuel level gauge and all mounting hardware for a no-hassle installation.

4.14 out of 5 stars ( 7 )

$997.94

Nitrous Express 3-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

3.83 out of 5 stars ( 6 )

$857.57

—

$945.66

Nitrous Outlet X-Series Nitrous Oxide Systems

Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!

4.56 out of 5 stars ( 27 )

$771.99

—

$893.99

ZEX Perimeter Plate Nitrous Systems

For years, nitrous systems have been just a plate bolted under the carburetor, equipped with two crude brass spray bars to inject nitrous and fuel into the intake charge. Nitrous technology is getting ready to take a huge leap forward! The ZEX Perimeter Plate nitrous systems are complete kits that provide optimum spray efficiency with nitrous and fuel outlets placed at 12 injection points around the perimeter of the intake manifold opening. This technology provides optimum distribution of nitrous oxide and fuel and delivers the most horsepower possible from your nitrous kit. Through ingenious cooling technology called Cryo-Sync, super-chilled nitrous is injected through the ZEX plate before being injected into the engine. This technology rapidly cools the carburetor and intake manifold while you spray, for even greater power. The ZEX Perimeter Plate nitrous systems are tunable from 100 to 300 hp and are compatible with any Dominator or square flange, 4-barrel carburetor application.

5.0 out of 5 stars ( 5 )

$800.95

NOS Sniper Nitrous Systems

NOS Sniper nitrous oxide systems are just what you need for extra horsepower without the high extra cost. Depending on the kit you choose, they're available with jetting for an additional 100 to 250 hp. These systems use a standard industrial-grade type valve on the bottle, have a natural aluminum finish on the carburetor plate, and are available for popular carburetors—including Holley 4150 square bore, 4500 Dominator, and Quadrajet spread-bore styles. NOS Sniper nitrous oxide kits include a distinctive, bright orange 10 lb. capacity nitrous bottle, mounting brackets, aircraft-quality stainless steel braided hose, an injector plate, solenoids, and all other electrical and mounting hardware needed for a complete installation.

4.56 out of 5 stars ( 9 )

$799.95

—

$921.95

NOS Powershot Nitrous Oxide Systems

NOS Powershot nitrous oxide systems are an excellent way to increase the horsepower of your engine. They use a thin, 1/2 in. injector plate that fits between your intake and carburetor. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. They're easy to install and are factory-preset to provide 125 hp for V8 applications or 90 hp for V6s. Kits come complete with: * Nitrous and fuel solenoids * Fuel filters * 12 ft. of -4 AN stainless braided supply line * Switches * Wiring * All necessary hardware

4.81 out of 5 stars ( 16 )

$767.95

—

$799.95

Nitrous Express Ford 3.5L Ecoboost and 3.7L Nitrous Plate Systems

Nitrous Express Ford 3.5L Ecoboost and 3.7L nitrous plate systems take these powerful motors to the next level with spraybarless technology—providing incredible distribution and atomization. For a clean look and easy installation, solenoids are integrated into the billet plate which is bolted between the intake and throttle body. Stainless steel brackets keep the 10 lb. bottle steady, while the new Lightning 45 valve feeds the "go juice." Nitrous Express includes a direct plug-in fuel line adapter for safe hookup without cutting factory fuel lines. The TPS autolearn switch included in these systems only activates at wide open throttle, and when you take your foot off the accelerator they automatically turn off. Additional features include a master arming switch, relay, extra-long stainless N20 line, relay harness, and hardware. Rip up the roads with Nitrous Express Ford 3.5L Ecoboost and 3.7L nitrous plate systems.

4.0 out of 5 stars ( 2 )

$781.77

—

$918.25

NOS Sniper EFI Wet Nitrous Systems

NOS Sniper EFI wet nitrous kits are the perfect upgrades for budget-minded builders who want the easy bolt-on power that made nitrous famous. Sniper EFI kits feature the exclusive NOS soft-plume fogger nozzle that finely atomizes the fuel for superior nitrous and fuel distribution. Sniper kits include all necessary installation components and will provide up to 75 hp in 4- and 6-cylinder engines—and up to 150 hp in 8-cylinder engines. Order the universal or recommended kit to best fit your vehicle and engine application.

4.8 out of 5 stars ( 5 )

$767.95

—

$870.95

Nitrous Express Hitman Plus Nitrous Systems

If you're just getting into nitrous, or are on a budget, and you're looking for a powerful basic system that you can upgrade to higher performance later on, Nitrous Express has the answer. Their Hitman Plus systems can deliver from 50 to 200 hp, in 50 hp increments, right out of the box. However, you can upgrade them to 300 hp just by changing the nitrous solenoid and jetting, or you can jump up to full Stage 6 levels whenever you want. Kits include the nitrous distribution plate, bottle and mounting brackets, supply hose and fittings, switch, wiring, and solenoids.

Not Yet Reviewed

$774.43

—

$980.26

NOS CrossHair Nitrous Oxide Plates

These NOS CrossHair nitrous oxide plates have been designed with the serious racer in mind are capable of 350+ hp. They are based off of the popular Double Cross plate and have improved distribution of the fuel and nitrous, helping with today's complex intake manifold designs. The plates feature double down nitrous bars for better distribution and atomization, putting more power down to the track. NOS CrossHair nitrous oxide plates come in a blue anodized finish, your choice of Holley 4150 or Dominator bolt patterns, jets, plumbing, and two gaskets.

Not Yet Reviewed

$767.95

On Sale

Nitrous Outlet Heated Nitrous Bottle Brackets

Nitrous Outlet heated nitrous bottle brackets can help keep nitrous pressure at optimum levels for a consistent flow, pass after pass. They offer several options, from bottle brackets only to kits with accessories, single or dual brackets, and vertical or horizontal styles. Also, you can choose simple brackets with quick-release clamps and aluminum cradles, or show-stopping machined 6061 billet aluminum brackets with quick-release knobs and rubber insulators. Safely warm your bottle for performance with one of Nitrous Outlet's heated nitrous bottle brackets.

3.67 out of 5 stars ( 3 )

$968.99

—

$1,075.99

$775.19

—

$860.79

Nitrous Outlet Hot Bath Nitrous Bottle Warmers

Nitrous Outlet Hot Bath nitrous bottle warmers are used by hardcore racing enthusiasts to heat nitrous bottles by submerging them in water—and using the electronic control module to dial in an exact temperature. This is the most precise method of heating a bottle to a specific pressure rating. The bath units will heat almost any size bottle and are meant for racers who need to heat several bottles. These heaters do not operate inside the vehicle; they must be plugged into a standard 110 V outlet to operate. Hot Baths are made from heavy gauge TIG-welded aluminum and are powdercoated for long-lasting oxidization protection. The edges have a thick rubber coating to prevent scratches to bottles; and a thick aluminum handle divides the unit into two sections. Prepare your nitrous for optimum performance!

5.0 out of 5 stars ( 1 )

$848.99

Nitrous Express Holley Hi-Ram Plenum Plate Conversion Kits

Nitrous Express Holley Hi-Ram plenum plate conversion kits bolt between the upper and lower intake manifold on Holley Hi-Ram manifolds for a quick and clean install. Nitrous and fuel are injected into each cylinder from the side of the runner, providing direct port-like distribution without having a flow-restricting nozzle or spray bar in the runner. High-tech Holley Hi-Ram plenum plate conversions are made from billet aluminum with passages machined directly into the plate, so there's no need to worry about spray bars breaking or spinning.

Not Yet Reviewed

$954.31

Nitrous Express EFI Single Nozzle Nitrous Systems

It used to be that big horsepower increases required major internal engine modifications. However, Nitrous Express has a way that's a whole lot easier--and cheaper. Just bolting one of their EFI single nozzle nitrous systems onto your domestic or import can add from 35 to 150 hp to a V8, with intermediate choices of 50, 75, and 100 hp (with a maximum of 75 hp for fours and sixes.) These systems rely on a Nitrous Express Shark performance nozzle and will work with standard fuel pumps, without any timing retard. The kits include the nitrous bottle, nozzle, hoses, solenoids, wiring, and mounting hardware.

5.0 out of 5 stars ( 2 )

$781.77

—

$964.63

Nitrous Express Motorcycle, Jet Ski, Snowmobile & ATV Systems

If you thought you couldn't add nitrous on your powersports vehicle—Nitrous Express has a pleasant surprise for you. They offer systems for jet skis, snowmobiles, motorcycles, and ATVs. These kits include the nitrous bottle(s), plus the appropriate mounting brackets, nozzles, switches, solenoids, supply hoses, and fittings, as well as a fuel pump, when needed. Boost your powersports performance with a nitrous system from Nitrous Express.

Not Yet Reviewed

$890.61

—

$970.00

Nitrous Express Pro Power Nitrous Plate Systems

Nitrous Express has a nitrous system for people with carbureted vehicles whose high performance philosophy is "too much is almost enough." Their Pro Power plate systems crank out power in spades, from a 100 to as much as a 500 hp increase over stock at the wheels. The heart of these systems is the "Next Generation" Phase 3 distribution plate, which has no spray bars to sag, split, or disturb the airflow into the manifold. Race fuel is required for increases above 150 hp. The kits come complete with: * Nitrous bottle and stainless steel mounting brackets * Solenoids * Relay * Supply line and fittings * Switches * Wiring * Mounting hardware

4.5 out of 5 stars ( 2 )

$776.57

—

$974.47

Nitrous Outlet 4500 Stinger Plate Conversion Kits

Nitrous Outlet 4500 Stinger plate conversion kits bring you a new 2nd generation Stinger plate that's capable of delivering up to 600 hp! They feature a large, unique, cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each Stinger has 15 discharge ports for nitrous and 15 for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Their Stinger plates are CNC-machined from 6061 billet aluminum, they have a black anodized body and a red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Nitrous Outlet 4500 Stinger plate conversion kits include the 2nd generation 4500 Stinger plate only. Nitrous Outlet 4500 Stinger plate conversion kits are designed to fit any carbureted or EFI single-plane 4500 flange intake manifold.

Not Yet Reviewed

$976.99

Nitrous Express NXd Stacker Diesel Nitrous Systems

The NXd Stacker nitrous systems are the pinnacle in economical, safe add-ons for your modified diesel truck. Nitrous Express is committed to advancing nitrous technology. With these systems, they have succeeded in boosting torque and horsepower, dramatically reducing exhaust temperatures, and eliminating that ugly black smoke cloud. They allow you to stack nitrous on your existing diesel chip. These Stacker systems include Lightning series solenoids, a nitrous bottle with a Lightning 45 bottle valve, stainless braided feed line, nickel plated fittings and all necessary hardware need for installation. For the most up-to-date technology, always look to Nitrous Express!

Not Yet Reviewed

$817.51

—

$887.12

NOS Pro Shot Fogger to Pro Shot Fogger 2 Dual 4150 Upgrade Kits

NOS Pro Shot Fogger Cheater upgrade kits take your Pro Shot Fogger system and convert it into a two-stage Pro Shot Fogger 2 kit. The dual-stage feature allows the user to jet the first stage for traction off the line; and then in the second stage, utilizing a Cheater spray bar plate, you add maximum mid-range and top-end power. Through testing, NOS has optimized the jetting of the Pro Shot Fogger 2 upgrade kits for improved power and performance. Available in single-four or dual-four applications in either a Holley square flange or Holley Dominator bolt pattern, the Pro Shot Fogger 2 upgrade kits come complete with NOS improved Cheater nitrous and fuel solenoids, Cheater spray bar plate(s), jetting, and all the necessary hardware to upgrade your Pro Shot Fogger into a dual-stage Pro Shot Fogger 2 system.

Not Yet Reviewed

$899.95

NOS Holley Hi-Ram LS Nitrous Plates

NOS Holley Hi-Ram LS nitrous plates provide a clean and easy way to install a nitrous system in your Hi-Ram intake manifold. These billet aluminum plates sandwich between the upper and lower intake, making installation simple. To keep things durable NOS machines each plate from one piece of 6061-T6 aluminum—then machines the passages directly into the plate and finishes them with an anodized coating to prevent corrosion. Designed to be run as a dry nitrous system, the plates are capable of supporting over 1,000 hp. Give your Holley Hi-Ram intake an extra kick with a NOS Hi-Ram LS nitrous plate. Order the model and finish recommended for your engine family application.

Not Yet Reviewed

$799.95

Nitrous Outlet Dedicated Fuel Systems

Separate and specific, a setup just for your nitrous--dedicated fuel systems from Nitrous Outlet. A fuel enrichment system devoted to your nitrous removes the strain from your vehicle's stock system and gives you more control. These dedicated setups come with custom-built, lightweight, high-density plastic or heavy-duty, hand-welded aluminum fuel cells. A fuel pump, regulator, hose, fuel lines, and fittings complete the systems. Just about all of them are compatible with high or low fuel pressure by changing a spring inside of the fuel regulator, and they require no modifications to install. Create a distinct setup for your nitrous with Nitrous Outlet dedicated fuel systems.

4.0 out of 5 stars ( 1 )

$978.99

Nitrous Express Piranha Nozzle Nitrous Systems

Space can be at a premium in some engine compartments. Nitrous Express Piranha nozzle nitrous systems are designed to deal with that problem and still give you big-time power increases. They're built around NX's compact, yet highly effective Piranha nozzles and can deliver from 100 to 250 extra horsepower for 4-cylinder engines (including the air-cooled Volkswagen). For sixes, the power jumps range from 150 to 375 horses, and V8s can get boosts of 200 to 550, or even 600 hp. The kits come with nozzles, delivery lines and fittings, jets, solenoids, wiring, switches, and mounting hardware.

3.0 out of 5 stars ( 1 )

$772.50

—

$993.77

124 Results Found For "nitrous"