Availability
Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.
( 32 )
$898.00
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 605 )
$751.00
—
$1,090.00
Briggs & Stratton 206 racing crate engines are factory-sealed long blocks with ground cams and controlled piston pop-up (reducing compression variance). These budget-friendly mills feature a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory-shipped carburetor jets. Simply put: the 206 engines even the playing field so that drivers can focus on the important task at hand--winning the race! Briggs & Stratton 206 crate engine features and specs: * Primary use: Karting, Microstocks, Jr. Drag Racing * Engines are assembled by hand in Milwaukee, WI using tooling and dies specifically designed for racing for unparalleled repeatability * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel-faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs * High-grade stainless steel dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom grafoil composition head gasket
( 7 )
$759.00
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 703 )
$844.55
—
$1,179.80
$760.10
—
$1,061.82
Corbeau Sport seats maintain your stock look, but add a sporty edge. They're direct bolt-in replacements for many Jeeps, and are available in matching colors and materials to complement your rig's interior. Sport seats feature map pockets on the back and headrests that will adjust both forward/back and up/down. If you've worn out your stock seats or are simply looking for a more comfortable replacement, Corbeau Sport seats will enhance not only the looks of your vehicle, but also your overall driving experience.
( 34 )
$759.00
—
$829.00
Lokar electronic sport shifters allow you to take control of your automatic transmission whenever you desire. Just shift your lever from drive into sport mode and begin bumping through the gears. Lokar has maintained all of the safety features from their traditional units, and these sport-mode shifters are available for several applications in different shifter lever lengths and knob styles. Retain classic looks, while adding new technology with Lokar electronic sport shifters. Features include: * Positive lock-out in Park and Neutral * Neutral safety switch * Floor mount design, cable operated * Standard automatic with integrated "Sport Shift" mode * Works will all current Lokar knobs and adapters * Several lever lengths in straight or bend-styles available * Works with most aftermarket controllers * Cable-integrated bracket
( 24 )
$795.95
—
$965.95
Holley Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (red, blue, or black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. Holley Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as 4 corner idle for precise idle control, mechanical secondaries for great performance, clear fuel level sight plugs for easy, no mess fuel level adjustments, Ford automatic transmission kickdown for use on popular Ford transmissions, four vacuum ports for all necessary vacuum accessories, and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with red, blue, or black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
( 81 )
$899.95
—
$1,049.95
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$786.00
—
$1,051.00
Sparco Evo L QRT competition seats are all-new to the Evo seat range, with a taller back, and raised shoulder-belt guide holes to position the harness correctly on taller drivers. The seat is wider to fit drivers with waist sizes up to 36 in., while still maintaining a shape that easily fits into smaller race vehicle cockpits. Engineered with all-new technology for a ultra-light shell, the Evo L QRT competition seats offer a relaxed back angle design to contribute to a very comfortable driving position. Sparco Evo L QRT competition seat features: * Fiberglass composite construction * Highback, bucket-style design * Thin base cushion for lower driver position * Comfortable split thigh cushion allows independent leg movement * Non-slip fabric for the shoulders and seat bottom * Side mount application * HANS-compatible * FIA-approved
( 2 )
$929.00
Sparco Evo XL QRT competition seat features Sparco's patented QRT ultra-light technology that offers an industry unmatched strength-to-weight ratio for fiberglass composite seats. Designed and developed in cooperation with many Sparco-equipped drivers, the seats relaxed back angle contributes to a very comfortable driving position. As the largest non-head restraint seat in Sparco's seat range, the Evo XL is designed to fit drivers with up to a 38 in. waist, yet their slender shoulder supports will help maintain a slim profile for easier installation in more cockpits. Sparco Evo XL QRT competition seat details: * Fiberglass composite construction * Highback, bucket-style design * Anti-wear fabric added to the seat edges improves durability * High-grip material at the shoulders helps keep the driver in place * Thin base cushion for lower driver position * Comfortable split thigh cushion allows independent leg movement * Side mount application * HANS-compatible * FIA-approved
( 2 )
$929.00
Milodon timing-gear drive assemblies are designed for all-out competition, but work equally well in any application. Their proven fixed idler gear system is capable of maintaining consistent cam timing without siphoning off power the way 4-gear types can. Timing changes are easy via Milodon's adjustable bolt pattern cam gears and hub assemblies. Made for strength and durability, these gear drives will last indefinitely. They are available in a flat-cover style, which uses a stock-type water pump, or an injected/blown style, which doesn't use a stock-type pump.
( 15 )
$798.95
—
$998.95
What is your engine wearing? Dressing your Chevy engine with a genuine Chevrolet Performance intercooler water pump means getting the fit and function you know will produce the desired results. These durable fluid pump assemblies are quality-built to outfit your supercharged engine with effective cooling and efficient operation. For upgrade or replacement, maintain your engine's red carpet performance by choosing parts tailor-made to fit—a Chevrolet intercooler water pump.
( 1 )
$785.99
ARC Pro Mod Flat Touch switch panels with backlit system kill switch are truly unique! These Flat Touch switch panels use no electronics, which makes them immune to EMI and RFI interference. Units master kill switch is designed to turn off any, none, or all the switches at the same time for safety during competition racing. Available in 4-switch, 8-switch, or 12-switch configurations, each module comes with a selection of race words for switch labeling. White face switch modules have text labels backlit red when the switch is off, allowing you to not only see where, but what each switch is. When the switch is turned on the backlight changes from red to green. Black face switch models are equipped with nightglow, and function exactly the same as white face switch modules but feature illuminated text and outer perimeter that automatically increases the unit's brightness at night to maintain better visibility in low light vehicles.
Not Yet Reviewed
$864.99
—
$914.99
On Sale
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$892.25
—
$1,109.80
$797.48
—
$998.82
On Sale
Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 90 psi with Signature models), featuring a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Includes two stainless steel T-bolt clamps (12703) for mounting * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 HP
( 1 )
$859.90
$773.91
Clearance
Flaming River VDOG variable angle gears have a strong aluminum housing—available in either cast or billet—and the output shaft is 3/4-36 in. for compatibility with universal joints. Each unit is gear driven without any chains or sprockets. It can be mounted in horizontal or vertical positions—ideal for cab-over vehicles, T-Buckets, and specialty builds with big motors and tight firewall clearance. Order the material and finish you prefer. Additional features: * 90 degree gear box with a 35 degree variable angle shaft * Articulating ball design for maximum adjustability * 1:1 ratio to maintain rack and pinion or steering box gear ratio * Award-winning: 2019 SEMA Best Engineered New Product and Best New Street Rod Product
Not Yet Reviewed
$836.99
—
$978.99
Old school looks, modern performance, and advanced manufacturing all rolled into one—Trick Flow's® R-Series Tunnel Wedge intake manifold for Ford 390-428 delivers just that. Part of the original Tunnel Wedge's cool factor was its appearance, so Trick Flow® took special care to match the looks of the legendary OEM version while improving upon its performance. Trick Flow® was able to maintain the original carburetor locations—but on the inside of the manifold, Trick Flow® overhauled the port design for more airflow and incorporated a new O-ring sealed bottom plate. Cast in premium-grade A319 aluminum, the manifold is topped with carb flanges machined for original Ford FE Tunnel Wedge-style square bore carburetors. Mounting hardware is included.
( 4 )
$999.99
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 944 )
$753.95
—
$969.95
Briggs & Stratton Junior 206 crate engines are made tough! Each engine is hand-assembled in-house using tooling and dies specifically made for racing--for unparalleled repeatability. The factory-sealed long blocks include a ground cam and controlled piston pop-up (reducing compression variance). They're a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory carburetor jets. These 206 race engines are powerhouses! Briggs & Stratton Junior 206 race-only crate engine specs and features: * Primary use: for karting, high school/collegiate Supermileage Competitions * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs for seasons of racing * High-grade stainless steel, dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 4,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom graph oil composition head gasket * Max Torque clutch, driver, and installation kit * Green premium air filter * Carburetor locking cap
( 1 )
$759.00
The professional's metal cutting saw, Evolution S14MCS 14 in. metal cutting mitering chop saws deliver the ultimate metal cutting experience.  Featuring the advanced EVOMAX ultra-long-life blade, a powerful EVOMAX intelligent motor, and Evolution's innovative mitering base, the S14MCS saws set a new standard in accuracy, performance, and reliability. These features, along their cold cut technology, provide 4 times faster cuts than abrasive saws, that are virtually spark-free, leaving a burr-free, cool-to-the-touch cut, straight from the saw. Plus, the precise +/-46-degree mitering base allows you to make accurate miter cuts without repositioning your workpiece. You can work efficiently and effectively while maintaining a cleaner, safer workshop with no airborne abrasive dust, thanks to the Evolution S14MCS 14 in. metal cutting mitering chop saw. Features and benefits: * EVOMAX 15-amp intelligent motor with active blade speed optimization extends blade life by up to 30 percent  -- Soft start reduces electrical current spikes, preventing breaker trips, and reduces mechanical stress, extending motor life -- Electronic blade brake stops the blade in seconds for safer, faster working * EVOMAX cermet carbide blade -- Proven to make 3500+ cuts through 4 in. mild steel round tube -- 80 cermet carbide teeth deliver clean, accurate cuts -- Handcrafted in Japan for unmatched quality * Dual sliding front clamps move on three axes to secure any workpiece shape or size * Quick-release clamps and tool-free adjustments for quick saw setting * 3-position cutting head lets you shift the blade path forward for optimized cutting and extended blade life * Shadow line cut guide clearly shows where the blade will cut, making workpiece alignment easy and accurate. Unlike a laser guide, the bright LED works in all environments and will never go out of alignment. * A 1/4 in. steel plate reinforces the fence to prevent flex during heavy clamping * Structural ribs strengthen the base * Convenient onboard hex wrench storage for fast blade changes * Knurled finish on fence and clamp face securely grips workpiece, supports accuracy * Ergonomic horizontal handle and trigger for all-day comfort * 1,100 rpm no-load speed * 10 ft. rubber cord
Not Yet Reviewed
$1,000.00
On Sale
Switch to the Darkside! Hooker Competition Darkside ceramic coated headers feature an exclusive proprietary black ceramic coating that offers a more refined texture and better appearance. They are manufactured from durable 16-gauge steel and have 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. These headers provide improved thermal resistance up to 1,700 degrees F, limiting heat migration through the header and reducing underhood temperatures. Unless otherwise noted, they are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 10 )
$799.95
—
$899.95
Sparco QRT-R competition seats are built via patented ultra-light technology that offers an unparalleled mechanical strength/weight ratio for a fiberglass composite racing seat. With an average weight savings of 7 lbs. (up to 10 lbs. +), the QRT-R approaches the weight of a carbon fiber seat—while maintaining the value price of a fiberglass seat. Better yet, these highback buckets are CAD-designed with a lower seating position that can fit a larger/taller driver within the exterior dimensions of smaller vehicles. Additional features: * Compact outer dimensions for easier installation * Harness guides that can accommodate a wide range of drivers * HANS-compatible and FIA-approved
Not Yet Reviewed
$929.00
Get complete control of your engine temperature! Derale PWM electric fan Powerpacks have integrated their high-performing PWM fan controllers into the fan units. The PWM fan controller features built-in soft start technology and utilizes pulse width modulation to constantly adjust electric fan speeds from 0-100%. This maintains the optimal engine operating temperature while allowing the fans to operate at the percentage needed, instead of 100% all the time. By using the fans at the percentage needed component life is increased and amperage spikes are eliminated. The Powerpacks use high output electric fans incorporated into precision engineered shrouds. The Derale Performance Powerpacks are available with single or dual fans and can conquer the most difficult cooling conditions.
( 33 )
$917.27
—
$974.60
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 28 )
$812.79
—
$942.79
$772.79
—
$902.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
