Free Shipping on Orders Over $125 at Summit Racing

PUI Interiors Inner Door Panels

PUI Interiors inner door panels restore your classic in a snap! Their door panels feature grain vinyl and dielectrically sealed lines and pleats. Remove your old panels and install new--restoring your classic is that easy with PUI Interiors inner door panels.

4.07 out of 5 stars ( 124 )

$814.99

Black Horse Off-Road Inner Fender Liners

Black Horse Off-Road inner fender liners finish the look of your tube fenders. They offer protection from rocks and debris entering your engine compartment. Add the perfect finishing touch to your vehicle. Order the Black Horse Off-Road inner fender liners designed to fit your application.

Not Yet Reviewed

$832.46

Spicer Drivetrain Products Differential Inner Gear Kits

Avoid premature failure with Spicer Drivetrain Products differential inner gear kits. Containing the only parts engineered to meet Dana specifications for strength and durability; these kits have everything you need to rebuild your differential case. Forged for longer life in Dana axles, you'll receive spider gears and side gears with shims, as well as the cross shaft and retainer pin. Choose top performance differential inner gear kits manufactured by a legendary name--Spicer.

4.55 out of 5 stars ( 33 )

$794.99

RCV Ultimate CV Axles

RCV Performance Ultimate CV axles simply replace your weak axle shafts with a high-strength design. Tests prove they are twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles. Even if you have big tires and big power, there are no worries. Ultimate CV axles are low maintenance and operate with a smoothness you can feel--whether off-road or on the street. And they back it all with a "No Questions Asked" limited lifetime warranty. Available for many vehicles, select the RCV Ultimate axle set designed for truck, SUV, or Jeep.

4.75 out of 5 stars ( 4 )

$879.95

Longfield Axle Shaft and Birfield Joint Kits

Extra beef for your rock crawler—Longfield axle shaft and Birfield joint kits put the brawn back into your fun. Stock axles and joints just don't have the strength to deal with larger tires and additional horsepower. Longfield kits furnish you with robust 100 percent chromoly components that are critical for you to "make the grade." So, go where you want, run any trail, and adventure with confidence—knowing your rig's equipped with Longfield axle shaft and Birfield joint kits. Order model designed for your vehicle and axle application.

4.63 out of 5 stars ( 8 )

$911.42

Yukon Gear & Axle 1541H Alloy Axles

Yukon Gear & Axle 1541H alloy axles are part of their extensive line of general replacement and high performance axles for passenger car, truck, and SUV applications. They feature high-quality alloys and the latest in heat-treating technologies to provide strong axles for off-road, street, and track use. Direct-fit replacements are available for dozens of axle models associated with countless cars and trucks. Additional rear axle features include: * One-piece forged 1541H axles are 25 percent stronger than OE 1040/1050 axles * Full-floating axles available for select applications * Rolled splines provide 30 percent strength increase over cut splines * Larger spline upgrades available * 2-piece tapered axles available * Offered in many lengths * Wide variety of bolt patterns

4.37 out of 5 stars ( 158 )

$762.99

—

$878.99

Goodmark Fiberglass Stock Replacement Hoods

Goodmark offers fiberglass stock replacement hoods for specific vehicle applications. Unless otherwise noted, the reproduction hoods have a steel support frame tailored to the gauge and dimensions of the original. These replicas are primed and ready for your finish coat of paint. For collision repair or restoration, Goodmark can furnish your brand new fiberglass bolt-on hood.

1.0 out of 5 stars ( 1 )

$965.99

Spicer Drivetrain Products Axle Shafts

Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.

4.78 out of 5 stars ( 89 )

$773.99

The Driveshaft Shop Level 4 Axles

The Driveshaft Shop's Level 4 axles are similar to their Level 5 models. The outer CV and the internals are made from high-grade chromoly. Original spline sizes are used to fit the stock hubs. To make sure the center bar is up to the task of hard launches, autocross, and rally demands, The Driveshaft Shop uses the new 300M material for extra strength. This material has proven to be, without a doubt, the strongest and most resilient bar material available to the company. Also, the inner CV was recently changed from a tripod design to a full ball and cage design—with a larger radius to the spline plug for added strength. So there you have it: a direct-fit axle that will withstand the most violent launches, time attacks, or rally applications. Order the Level 4 axles recommended for your vehicle.

Not Yet Reviewed

$849.99

Rekluse Clutch Z-Start Pro Clutch Kits

Rekluse Z-Start Pro clutch kits are the best-selling products that have been raced, abused and relied on by tens of thousands of riders in more types of riding and racing worldwide than any other Rekluse product. First introduced in 2005, Z-Start Pro was the first auto-clutch to give the rider manual clutch lever override capability—and defined the ultimate in tunability to suit each rider's preferences and riding conditions. These clutches are well-known in the off-road racing world as bulletproof and the tamer of the nastiest terrain imaginable. They're available for a variety of ATV and off-road motorcycles. Features and benefits: * Faster cornering * Improved traction * Virtually eliminates stalling * Better starts * Faster lap times * Fully tunable to rider preference and terrain conditions * Highest grade CNC-machined billet, hard anodized aluminum clutch components. Handles extreme abuse and offers long lasting durability. * Fully adjustable; includes optional wave springs and ball bearings. Allows rider to achieve a matrix of truly custom settings to obtain great performance advantages. * CNC laser-cut drive plates perfectly match the center clutch with continuous radius spine technology, causing clutch loads to be evenly distributed over a greater surface area with more precise tolerances. Longer clutch component life, smoother engagement / disengagement, and less clutch hammering that virtually eliminates notching with even the most aggressive riders. * Center clutch design with innovative fluid dynamic oil flow technology. Cooler operating temperatures for less fade and longer clutch and clutch plate life.

Not Yet Reviewed

$989.00

Clearance

Spicer Drivetrain Products Front Axle Shafts

Spicer Drivetrain Products front axle shafts feature an increased U-joint size that provides 25 percent higher yield strength than original U-joints. They offer unparalleled strength and longer life—the outer stub is re-engineered for added strength; improved snap ring retention reduces shock load failures; and material has been removed from the body and added to the yoke ears (to equalize deflection through the yoke and reduce bearing cap spinning). The axles are made from durable steel, with a micro-alloy improving their strength and a statistically controlled heat treatment ensuring proper hardness. Order the replacement model designed for your vehicle application.

4.6 out of 5 stars ( 131 )

$797.99

OER Authorized Wheelhouses

OER Authorized wheelhouses are constructed to original specifications featuring correct contours for an authentic appearance. Through time the wheelhouse and part of your quarter panel are exposed to the elements, salt, and other road chemicals that ultimately lead to rust and corrosion. These high-quality replacements from OER Authorized are perfect for fixing those areas.

4.5 out of 5 stars ( 2 )

$751.99

Spicer Drivetrain Products Rear Axle Shafts

Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.

4.35 out of 5 stars ( 51 )

$889.99

Motive Gear Ten Factory Axle Shafts

Motive Gear Ten Factory replacement axle shafts are available for direct fitment on nearly two dozen axle models and hundreds of vehicle applications. Built from quality materials and heat-treated for strength and durability, Ten Factory axle shafts are offered individually to swap out a broken or worn original—as well as in more complete kits, with multiple shafts, wheel studs, bearings, and seals (depending on your selection). The components feature strong forgings and alloys for quality axle shafts you can rely on. Choose the parts needed for your specific make and model.

4.6 out of 5 stars ( 141 )

$753.99

—

$859.99

BMR Polyurethane Bushing Kits

BMR polyurethane bushing kits does a lot more for your vehicle's performance. Factory rubber bushings just can't compare with polyurethane to increase handling stability, cornering ability, and eliminating bushing deflection. BMR bushings are unaffected by most chemicals and weather conditions so they do a better job--longer. They are available in multiple configurations to meet your specific vehicle application. Greatly increase the over-all feel and performance of your ride with BMR polyurethane bushing kits on board.

Not Yet Reviewed

$859.95

—

$969.95

Body Parts Bumpers

Body Parts bumpers are OE-replacements offering quality and value. These low-cost alternatives provide the proper fit and function to complete your repairs correctly. Body Parts bumpers are available in different materials, finishes, and styles to cover a wide range of applications.

4.48 out of 5 stars ( 21 )

$822.99

—

$903.99

OMIX-ADA Axle Shafts

OMIX-ADA axle shafts are offered for a wide range of applications. They have the axle shafts you need, whether you're looking for a stock replacement or an upgrade. OMIX-ADA's selection includes stock replacement shafts as well as premium chromoly alloy steel axles with capabilities far beyond those offered by OE axles. Either way, you can be assured of reliability and a perfect fit.

2.56 out of 5 stars ( 9 )

$819.99

Trail-Gear Rock Assault 9 Axle Housings

Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!

4.33 out of 5 stars ( 3 )

$999.99

Painless Performance 26-Circuit 1969 Direct-Fit Chevelle Harnesses

Painless Performance 26-circuit 1969 direct-fit Chevelle harnesses deliver everything you need, plus more! These kits offer provisions for connecting standard factory components, as well as what you'll need for aftermarket components. This includes options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. The 26-circuit harnesses follow all of the same routing found on the factory harnesses, which allows you to utilize the factory attachment points—and extra length has been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. True to their name, Painless Performance supplies what you need for a trouble-free, headache-free wiring job. The 26-circuit 1969 Chevelle harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * Fully integrated ground circuit * 120+ page manual full of color schematics, photos, and step-by-step instructions

5.0 out of 5 stars ( 7 )

$961.99

Transmission Specialties Powerglide SFI One-Piece Aluminum Transmission Cases

Transmission Specialties' Powerglide SFI one-piece aluminum transmission cases are SFI certified for Powerglide transmissions. They were developed to eliminate all weak points found in the original GM transmission case. Cast from 356-T6 aluminum and precision machined to rigorous specifications, these cases are SFI-approved for competition use. The case also features steel safety inner liner, thus, eliminating the need for any external shields.

4.67 out of 5 stars ( 3 )

$995.00

Lincoln Electric Weld-Pak 180i MP DV Welders

The Lincoln Electric Weld-Pak 180i MP DV Welders are built for hardworking professionals, but easy enough for anyone to use regardless of skill level. Requiring common 120 V input power or 230 V input power, the Weld-Pak 180i MP DV welders can be used almost anywhere—the shop, farm, home, or auto body shops! With simple two knob control, the machine is easy to set up for gasless flux-cored welding for deep penetration on thicker steel, gas-shielded MIG-welding on thin gauge steel, stainless or aluminum, stick-welding, or DC TIG-welding. For all your welding needs, the smart choice is Lincoln Electric products. Features, specs, and benefits: * Compact design, lightweight and portable at 34.5 lbs. * Conveniently plugs into household 230-volt or 120-volt power with included adaptor * Fully adjustable drive system reduces the chance of wire tangling and crushing * Brass-to-brass gun connection enhances conductivity * Durable cast aluminum gear box delivers added drive torque and quiet operation * Easy-turn numeric drive tension indicator identifies optimized ranges for different wire types Capable performance: * Forgiving arc makes dialing in your application easy * Smooth arc starts with minimal spatter * Wide 20-180 amp welding output range for MIG, FCAW and Spool Gun * Wide 10-165 amp welding output range for DC TIG * Wide 25 to 160 amp welding output range for Stick * MIG-weld 24-gauge up to 5/16 in. sheet metal in a single pass. Weld-up to 5/16 in. steel using self-shielded Lincoln Electric NR-211-MP wires. Stick-weld to 3/16 in. (4.8 mm), and TIG-weld to 1/8 in. (3.1 mm) * Optional TIG-torch and optional foot pedal for remote control of weld output while TIG-welding (sold separately) * Optional spool gun for MIG-welding aluminum up to 3/16 in. (sold separately) What's included: * Gun Magnum Pro 100L gun and 10 ft. (3.0 m) cable assembly with brass connection and 8-pin trigger connector (K530-7) * .025 in. (0.6 mm) and .035 in. (0.9 mm) contact tips (KH831 and KH832) (qty. 1 each size) * Gasless nozzle for inner shield welding (KH836) * Gas nozzle for MIG welding (KH835) * Spindle adapter for 8 in. (203 mm) diameter spools (KH720) * .025 - .035 in. (0.6 - 0.9 mm) wire diameter dual track drive roll for MIG and flux-cored welding (KP2948-1) Shielding Gas Apparatus Harris® 3000290 Gas Regulator (S25805) and 52 in. (1.3 m) hose (S19303) for use with Ar/CO2 blend gases and for use with CO2 shielding gas * Work clamp and 10 ft. (3.0 m) cable * Instruction manual, and quick start guide * Electrode holder with 10 ft. cable

5.0 out of 5 stars ( 1 )

$979.99

Arrma Kraton 1:8 Scale 6S EXB 4X4 Speed Monster Trucks

Arrma RC unveils the latest amped-up evolution of the Kraton 6S EXB 4X4 Speed Monster Truck—now loaded with even more upgrades to make it the ultimate 1:8 scale basher! With these additions, the Kraton 6S EXB is more rugged and driver-friendly than ever before. With its ominous black paint scheme and high-downforce wing, the aggressive monster truck body cuts a menacing figure off-road. But everyday maintenance is nothing to fear. It also now has a quick-release, clipless body retention system that offers fast, hassle-free chassis access and doubles as protection against body punch through. Huge dBoots Copperhead 2 big block tires on multi-spoke wheels give the Kraton 6S EXB a wide, stable stance and unrelenting traction. The hubs have been enlarged and toughened with dual, rubber-shielded inner bearings to give this updated version added smoothness and security. If you crave big air, ballistic 65+ mph speeds, and brutally over-the-top off-road bashing, the Kraton 6S EXB comes ready to deliver. Everything in its durable design contributes to high speed, confident control, and responsive handling over dirt, gravel, and short grass. Set up some ramps or build a few dirt mounds and let it fly! From the 7075 T6 aluminum laser-etched chassis plate to the red-anodized aluminum front and rear bulkheads, EXB-hardened parts provide exceptional toughness and intimidating style. All-metal diff outdrives and gearbox internals, plus durable steel driveshafts, combine for a reliable, heavy-duty drivetrain that holds up to high-speed bashing. Plush oil-filled shocks on EXB 7075 T6 anodized aluminum front and rear towers soak up the bumps. The efficient Spektrum Firma 2050Kv brushless motor is matched with an IC5 connector-equipped Spektrum Firma 150A Smart V2 ESC for more power and punch. To help you steer all that power where you want to go, Arrma RC includes a muscular Spektrum S665 steel gear servo. For intermediate to experienced bashers who want extreme speed and big air performance, the Arrma Kraton 6S EXB 4X4 Speed Monster Truck comes ready to deliver. With its updates and improvements, this is one of Arrma's biggest and best basher values yet! Arrma Kraton 6S EXB 4X4 Speed Monster Truck RTR features: * EXtreme Bash 7075 T6 anodized aluminum chassis * EXtreme Bash split tower-to-tower center braces * EXtreme Bash front bumper and steel rear skid plate * EXtreme Bash emulsion shock caps and M4 shock standoffs * EXtreme Bash heavy-duty front and rear arms * EXtreme Bash heavy-duty aluminum plates and hangers * EXtreme Bash heavy-duty turnbuckles * Spektrum 2.4GHz SLT3 transmitter and SR315 dual protocol receiver * Spektrum Firma 150A Smart V2 waterproof ESC * Spektrum S665 high-torque steel gear steering servo * Spektrum Firma 4074 2050Kv brushless motor * Arrma motor heatsink and cooling fan * Heavy-duty drivetrain * Durable steel driveshafts * Stronger diff outdrives * All-metal gearbox internals * New tuned oil shock package * Black matte and gloss monster truck body * Quick-release, clipless body retention system * Center body support * High-downforce wing * Strengthened one-piece wing mount * Strong composite chassis side guards * Multi split-spoke wheels * Toughened wheel hubs with dual, rubber-shielded inner bearings * Molded hand tools included * Ready to run—just add battery and charger

5.0 out of 5 stars ( 1 )

$829.99

Detroit Speed Detroit Tuned Steering Rack and Pinions

Detroit Speed Detroit tuned steering rack and pinions have been optimized to provide an exceptional modern performance feel on the street and on the track. They're available in both standard and narrow widths that are 24.5 in. and 21.5 in., respectively. They feature valving that's specifically designed to provide the increased performance feel found in late model performance vehicles, and they're made from all-new, superior-quality components for long-lasting durability. Detroit Speed Detroit tuned steering rack and pinions come complete with polyurethane mounting bushings and have an internal inner tie rod boot balance tube. So, if you want nothing but the best when it comes to your hot rod or street musclecar, Detroit Speed Detroit tuned steering rack and pinions are your answer.

4.0 out of 5 stars ( 1 )

$799.95

Billet Specialties Comp 5 Series Black Wheels

Billet Specialties says, "When battles are won or lost in less than a second ... you better have the right weapon." And their Comp Series of wheels are hard-core drag race-only wheels engineered to get you to the Winner's Circle. Every step of the manufacturing process is optimized to reduce rotational weight where it counts, and they meet SFI requirements. Designed for high-quality, lightweight performance on the strip, Billet Specialties Comp 5 Series black wheels are offered in spindle-mount and bolt-on front wheel styles and standard and beadlock rear styles. These pro-level wheels are forged for strength from aluminum and engineered for weight savings. Each wheel features a 5-spoke star pattern with a black anodized and machined finish. Select the Billet Specialties Comp 5 wheels of the ideal size for your drag racer. Drag Race front black wheels: * One-piece construction * Black anodized face and outer rim, machine-finished windows and recesses, and a black anodized back. * SFI 15.2 certified * Spindle-mount (select your spindle type): -- Includes Timken bearings and National seals -- Includes screw-on billet center cap -- Most sizes allow for direct mounting of the brake rotor * Bolt-on: -- Superior lateral and radial run out -- For use with mag shank lug nuts Drag Race standard rear black wheels: * 2-piece construction * Rotary forged centers for incredible strength and precision * CNC-spun outer rims for unrivaled trueness * Black anodized center with machine-finished windows and recesses with polished outer and inner rim * For use with mag shank lugs and 5/8 in. race studs * Superior lateral and radial run out * 6061 T-6 forged aluminum centers * Grade 8 hardware * SFI 15.1 certified

4.67 out of 5 stars ( 12 )

$803.00

113 Results Found For "inner"