Free Shipping on Orders Over $125 at Summit Racing

On Sale

FiTech Go Street EFI 400 HP Self-Tuning Fuel Injection Systems

EFI conversions made easy--FiTech Go Street EFI 400 hp systems are true carburetor replacements. And the price is a "Go" as well! Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. It's too easy not to go for it--FiTech Go Street EFI 400 hp systems. Features include: * Self-tuning fuel injection * Latest Bosch 4.2 wideband oxygen sensor * ECU is mounted on throttle body * Universal base fits any 4-barrel manifold * Throttle linkage suits most transmissions * Three fuel inlet connections * Voltage control fuel pump control * Wet flow technology * Swirl spray annular discharge design * Built-in fuel pressure regulator * Designed for applications making at least 6 in. of vacuum at idle

3.83 out of 5 stars ( 220 )

$869.00

$782.10

Summit Racing™ MAX-efi 500 Fuel Injection Systems

Summit Racing™ introduces its MAX-efi 500 Fuel Injector System, the most efficient way to convert your carbureted engine to premier EFI performance. These self-tuning throttle body units bolt directly to most 4-barrel manifolds; then, through their wideband oxygen sensor, the systems continually adjust fuel delivery to provide the optimum air/fuel ratio under all climate and altitude conditions. MAX-efi will support up to 500 hp, and the self-learning ECU allows for easy tuning. With safety in mind, these systems are also designed with a self-adjusting "limp home" mode to protect your engine if a sensor fails. In addition, they include a data-logging feature to track the system while it's running to ensure optimal performance. Other features of the Summit Racing™ MAX-efi 500 Fuel Injector Systems: * Powered by the most advanced self-learning technology available * 4-injector system is capable of supporting stock to 500 hp engines * High-flow aluminum throttle body with four 45mm diameter throttle bores * OE-quality wideband 02 sensor and TPS sensor included * Color touch screen hand-held controller * Billet aluminum anodized fuel rails * Compact external ECU for easy mounting * OE-style harness is clearly marked for easy installation and durability in extreme conditions * All sensors except the wideband 02 sensor and coolant temp sensor are integrated on the unit * Uses commonly available sensors for easy replacement if necessary * System uses a Temperature Manifold Absolute Pressure (TMAP) sensor instead of a MAP sensor, reading both air pressure and temperature * Fits square bore or spread bore intake manifolds. (Spread bore manifold requires an inexpensive plate to avoid leaks. See SUM-G1420) * Works with original carb-type distributor, factory-style throttle linkage, and most 4-barrel intake manifolds

4.09 out of 5 stars ( 69 )

$899.99

On Sale

FiTech Go EFI 4 600 HP Self-Tuning Fuel Injection Systems

When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle

4.16 out of 5 stars ( 257 )

$999.00

$899.10

Holley EFI Digital Dash Gauges

Holley EFI Digital Dash gauges are completely customizable, with a variety of gauge and indicator screens that can be programmed to display any parameter you need. They also offer a virtual switch panel, user-defined alarms, configurable shift lights, and can control on-screen playback of your EFI data logs. The Holley EFI Digital Dash gauges measure 7.5 in. wide, 4.625 in. tall, and 1 in. deep, which makes them compact, customizable dashes for use in a variety of motorsports applications. The digital dash gauges feature a low-glare, high-brightness, high-contrast 800 x 480 resolution, a full-color touch screen for easy viewing even in full sun, and plug and play connection to all Holley EFI systems, as well as a weatherproof aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance! Features include: * Quickly toggle between two or more active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel (replaces the need for physical switches) * User-defined alarms for any input * Configurable progressive shift lights and light bar * On-screen playback of EFI data logs * Download and save Holley EFI data logs to external USB memory stick * Expandable internal storage on micro SD card * Flexible mounting options * Support for future USB devices * Upgradable with future software enhancements * Multiple units can be used simultaneously on a Holley EFI system for larger dashboards * Internal 3-axis accelerometer

4.6 out of 5 stars ( 10 )

$921.95

On Sale

FiTech Go EFI 2-Barrel 400 HP Fuel Injection Systems

FiTech Fuel Injection brings you the Go EFI 2 Barrel 400 HP classic gold fuel injection system. This is a ready-to-run unit that strays away from the programmable features—and sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. FiTech once again allows you to ditch that old carburetor and advance into the EFI world at the most affordable price on the planet! Features include: * Self-tuning fuel injection * High-flow aluminum throttle body * Voltage Control fuel pump control * Wet flow technology; swirl-spray annular discharge design * Wideband oxygen sensor and TPS sensor * Two-injector system is capable of supporting 400 HP engines * Built-in fuel pressure regulator * Hand-held tuner * Integrated ECU * Air/fuel ratios can be optimized on-the-fly as you drive

3.33 out of 5 stars ( 6 )

$915.00

$823.50

On Sale

FiTech Easy Street 600 HP EFI Systems

FiTech Easy Street 600 HP self-tuning fuel injection systems deliver high performance—and style! Their gold finish is the perfect way to spice up that monster motor, giving it an old-school look. And, like all FiTech EFI systems, the Easy Street 600 HP is a self-learning, plug-and-play system that features an ECU mounted directly to the throttle body for simplified wiring and an easy installation. Examine the options and select the model best suited for your vehicle. Features of the Easy Street EFI-600 HP system include: * Annular discharge * Windshield mount for control * Four 80 lb. flow matched injectors * Extreme self-learning for a wide range of super-fast dial in connections * Suitable for crate engines and performance engines * Pre-programmed with bolt-n-go technology for out-of-the-box performance with minimal input required * Easy Tach input, reads Tach signal from COIL, HEI, CDI, and many other ignition brands (no timing control) * For non-boosted engines; natural aspirated applications only * Wide band oxygen/ sensor with mounting kit * On-board fuel pump driver with PWM * Hand-held module for performance tuning * One fan control * Compatible with E-85 gasoline

3.8 out of 5 stars ( 35 )

$926.00

$833.40

BTR Trinity Series Intake Manifolds

The Trinity Series intake manifolds is BTR's latest offering in high-quality cast aluminum intake manifolds for LS7 engines. Their short runner, 3-piece design allows for the ultimate in application flexibility and is similar in concept to billet intakes costing thousands more. Optimum operating range is 6000-8500 rpm and is primarily intended to bridge the gap between N/A and Boosted applications. These intake manifolds utilize the high LT1 throttle body position and accepts DBW or cabled throttle bodies, yet will fit in the tight confines of the C7, C6, C5 Corvette, as well as the popular F-body platforms. BTR Trinity Series intake manifolds come semi-assembled and includes all hardware required to bolt it on. Additional features: * Available in choice of silver or black satin texture powdercoat finishes * Design incorporates two runners and an interchangeable plenum * Both the port mouth radius and the port match are CNC-machined * Seal is generated by eight entrapped O-rings at the runner/plenum interface and is clamped by M6 stainless steel socket head cap screws * Port seals are achieved SAE O-rings seated in a dovetailed O-ring groove * Incorporates two ports on the side of the throttle body boss and on the rear * Runners and plenums can be purchased separately

4.5 out of 5 stars ( 2 )

$824.99

—

$999.99

BTR Equalizer 1 Intake Manifolds

BTR Equalizer 1 intake manifolds are low-profile, high performance intakes. Cast from 319 aluminum, these Brian Tooley Racing manifolds are designed for combinations that are looking to make peak power between 6,000 and 8,000 rpm. Boosted engine combinations are actually more reliable making peak power in this higher rpm range, compared to making peak power around 6,500 rpm like most stock style intakes, provided the valve train is engineered properly. These units are available for a variety of applications from 1997 and up. Features and specifications for Equalizer 1 manifolds: * O-ringed port openings and lid surface * Easy insert steep chamfer injector bores for trouble-free injector O-ring insertion * Underslung plenum design for maximum hood clearance * 102mm profiled throttle bore * One map sensor location in rear, with two additional user optional locations * Additional user-defined LS3 and LS1, LS2, and LS6 map sensor bores * ISO9001:2015 certified machining * 2-piece design for easy porting access * Lightweight CAD-generated design * Profiled port openings for optimum out-of-the-box performance * All threads are roll form aircraft standard DSDV * Clears F-body cowls * Clears C5 cowls with minimal massaging to intake

4.0 out of 5 stars ( 5 )

$799.99

Holley LS Modular Lo-Ram EFI Intake Manifolds

Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors

4.38 out of 5 stars ( 8 )

$972.95

—

$999.95

Holley EFI Hi-Ram Intake Manifolds

Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings

4.5 out of 5 stars ( 2 )

$875.95

—

$999.95

Holley EFI LS Hi-Ram Intake Manifold Bases

Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.

5.0 out of 5 stars ( 1 )

$921.95

—

$999.95

On Sale

Holley Sniper EFI Fabricated Intakes

Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.

3.71 out of 5 stars ( 17 )

$799.95

—

$972.95

On Sale

FiTech Ultimate LS Loaded Intake Manifold Kits

FiTech Ultimate LS Loaded intake manifold kits are just like the systems, but without the ECU and hand-held controller. FiTech Ultimate LS Loaded intake manifold kits will have: * Low-profile 92mm or 102mm (750 hp kits only) inlet aluminum fabricated intake with 1,500 to 6,500 rpm powerband, 3mm construction, TIG-welded, black anodized with embossed FiTech logo * CNC-machined with O-ring gaskets and hardware included * High-flow cable operated 92mm or 102mm (750 hp kits only) throttle body * Parabolic inlet machining for smooth throttle transitions, same as OE * Throttle body features progressive linkage pulley with double-return spring and adjustable stop * Billet fuel rails with AN fittings and fuel crossover * 36 or 55 (750 hp kits only) lbs./hr. flow-matched injectors

3.86 out of 5 stars ( 7 )

$965.00

$868.50

Painless Performance Fuel Injection Harnesses

For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.

4.48 out of 5 stars ( 95 )

$809.99

On Sale

Holley LS Modular Ultra Lo-Ram EFI Intake Manifolds

Holley modular Ultra Lo-Ram intake manifold kits feature a design custom-made for LS engines equipped with LS cathedral port cylinder heads, as well as OEM or aftermarket models. They provide an ideal solution for forced-induction (supercharged or turbocharged) engine applications and select throttle bodies—plus the base intake manifold features a lower overall height to fit under a stock or mildly modified hood. The included fuel rail kits come with two sets of brackets: a set for long (usually standard length) fuel injectors and a set for short (such as Pico or LS7) fuel injectors. The Holley LS modular Ultra Lo-Ram EFI intake manifolds best suited for your application also allow the use of front-feed plenum entry. More product features, items, and notes include: * Designed for forced-induction engine applications with peak power at 7,000 to 8,000 rpm (depending on the application) * Intake design facilitates custom inlet duct and throttle body placement * Allows design and fabrication of special throttle body adapters or inlet ducts for custom installations * Different finishes available for the best look to match your ride * Mounting hardware * With forced induction and the short runner length, the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger you use

Not Yet Reviewed

$1,075.95

$806.95

—

$999.95

Trick Flow® Replacement EFI Upper Intake Manifold Plenums for Ford

Trick Flow® replacement EFI upper intake plenums are computer-modeled to produce maximum torque and horsepower. The runner length and cross-sectional taper have been optimized to improve airflow throughout the rpm range—and the symmetrical, high-velocity ports distribute the air/fuel charge evenly to every cylinder. These A319 aluminum castings work well with nitrous and fit under most stock-height hoods for an easy bolt-on installation. They're available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. The plenums must be used with corresponding Trick Flow® lower intake manifold base.

4.92 out of 5 stars ( 12 )

$824.99

Edelbrock Performer 5.0 RPM II Intake Manifolds

Prepare your pony for the street and strip! The Edelbrock Performer 5.0 RPM II manifolds are designed for 1986-95 5.0L Mustangs and have shown significant gains in horsepower over existing designs in the 1,500 to 6,500 rpm range. That makes these intakes ideally suited for street and strip applications. The manifolds consist of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. The upper manifold is powdercoated light titanium gray.

4.5 out of 5 stars ( 6 )

$990.95

BTR Equalizer 3 Intake Manifolds

BTR Equalizer 3 intake manifolds are low-profile, high performance intakes. Cast from 319 aluminum, these Brian Tooley Racing manifolds are designed for combinations that are looking to make peak power between 6,000 and 8,000 rpm. Boosted engine combinations are actually more reliable making peak power in this higher rpm range, compared to making peak power around 6,500 rpm like most stock-style intakes, provided the valvetrain is engineered properly. Features and specifications for Equalizer 3 manifolds: * O-ringed port openings and lid surface * Easy insert steep chamfer injector bores for trouble-free injector O-ring insertion * Underslung plenum design for maximum hood clearance * 102mm profiled throttle bore * 1 map sensor location in rear with 1 additional user optional locations * LS3 map sensor bore * ISO9001:2015 certified machining * 2-piece design for easy porting access * Lightweight CAD generated design * Profiled port openings for optimum out of the box performance * All threads are roll form aircraft standard DSDV * Clears F-body cowls * Clears C5 cowls with minimal massaging to intake

4.33 out of 5 stars ( 3 )

$779.99

—

$829.99

Edelbrock Performer RPM Air-Gap LT1/LT4 Intake Manifolds

Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.

4.0 out of 5 stars ( 4 )

$822.95

Holley Ford 7.3L Godzilla Low-Profile Intake Manifolds

Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish

Not Yet Reviewed

$950.95

—

$972.95

On Sale

Holley EFI Systems Wiring Harnesses

Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.

4.78 out of 5 stars ( 32 )

$799.95

—

$972.95

Trick Flow® R-Series EFI Intake Manifolds for Ford 5.0L

Trick Flow® R-Series EFI Intake Manifolds deliver a perfect balance of airflow distribution and velocity. The result is excellent low-end torque and superior horsepower. The manifolds are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. These manifold kits are designed for use on non-EGR engines. Manifolds for 5.0L engines with a 75mm throttle body inlet produce power in the 2,500-7,250 RPM range. Manifolds for 90mm throttle body applications produce power in the 3,000-7,750 RPM range. Additional features: *Large cross-section with 12.000 in. runners *Overall height to the upper manifold flange is 11.000 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.380 in. x 1.380 in. port size at mating flange The upper plenums and lower manifold are also available separately.

3.0 out of 5 stars ( 1 )

$794.99

—

$859.99

Snow Performance Boost Cooler Stage-2.5 Water/Methanol Injection Systems

Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.

4.75 out of 5 stars ( 8 )

$909.30

—

$937.51

On Sale

Holley EFI LS Single Plane Split-Design Race Intake Manifolds

Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.

4.0 out of 5 stars ( 4 )

$799.95

—

$849.95

220 Results Found For "Injection"