Free Shipping on Orders Over $109 at Summit Racing

DeatschWerks X2 Series Fuel Pump Plumbing Kits

DeatschWerks X2 Series fuel pump plumbing kits contain all the items you need for the proper install of your X2 pump module—and nothing you don't. DW packages a hard anodized regulator to deliver stable air-to-fuel ratios for optimal performance, a precision fuel pressure gauge, a filter with a meticulously engineered stainless steel element, fittings, and braided stainless steel fuel line that's either PTFE or CPE lined—your choice. Choose the DeatschWerks X2 Series fuel pump plumbing kit best suited for your application.

Not Yet Reviewed

$799.00

—

$849.00

On Sale

Holley Dual In-Tank Pumps

If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed

Not Yet Reviewed

$972.95

$874.95

Holley Ford 351W Hi-Ram EFI Intake Manifold Bases

Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor

Not Yet Reviewed

$972.95

Jaz Products Pro Sport Fuel Cells with Flush Mount Cap

Jaz Pro Sport fuel cells with flush mount cap equip your race car with quality, value, and most importantly--safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They are set up with one -8AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Aircraft-style flush mount cap * One -8AN tip over valve vent fitting

5.0 out of 5 stars ( 2 )

$839.99

—

$876.99

Jaz Products Pro Sport Fuel Cells with 90 Degree Filler/Flapper and Cap

Jaz Pro Sport fuel cells with 90 degree filler/flapper and cap equip your race car with quality, value, and most importantly--safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They are set up with one -8AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Vented twist lock cap with spring-loaded flapper * One -8AN tip over valve vent fitting * 2 1/2 in. neck diameter with 2 in. height

Not Yet Reviewed

$763.99

—

$988.99

Russell ProFlex Hose

Russell's ProFlex hose series represents the ultimate in mandrel-produced, stainless steel, wire braid hose. It has a unique CPE inner liner that's compatible with synthetic lubricants and hydrocarbon racing fuels. ProFlex hose is perfectly matched for use with Russell full-flow hose ends (taper design). It also features temperature ranges of -40 to +350 degrees F for a wider variety of uses and routing. Order the length and diameter needed for your application.

4.7 out of 5 stars ( 149 )

$989.95

Vibrant Performance Braided PTFE Hose

Vibrant Performance braided PTFE hose present endless ways to build your high performance fluid delivery system. They are available in many lengths and AN sizes with either a stainless steel or nylon braided covering that offers superior protection against abrasion and corrosion. The PTFE inner liner can handle higher operating temperatures, operating or burst pressures, and eliminates vapor fuel permeation. These race-proven hoses are suitable for all types of commonly used race fuels and oils, as well as brake, transmission, clutch, power steering, and coolant fluids. Vibrant Performance braided PTFE hose deliver outstanding quality and options to make your plumbing project a success.

4.17 out of 5 stars ( 42 )

$869.99

Vibrant Performance Braided Flexible Race Hose

Vibrant Performance braided flex hose are available in stainless steel and nylon braided covers which provide excellent abrasion resistance and surrounds a reinforced synthetic rubber inner liner. Offered in several lengths and AN sizes, they are suitable for oil, water, fuel, methanol, coolant, vacuum service, and E85. Note: These hoses are NOT suitable for use as brake lines or other hydraulic pressure lines, nor are they suited for extended submersion in fuel or oil (not recommended for in-tank applications).

4.53 out of 5 stars ( 87 )

$815.99

Russell ProClassic Hose

This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.

4.78 out of 5 stars ( 68 )

$989.95

Russell ProClassic II Hose

For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.

4.67 out of 5 stars ( 39 )

$989.95

DeatschWerks X3 Series Fuel Pump Plumbing Kits

Get your ride set up with DeatschWerks X3 pump module return plumbing kits. Designed to fit the X3 pump modules, these kits include stainless steel braided flex line, with either PTFE or CPE hose, and the necessary fittings and other components that allow you to achieve the flow you want and fit your ride needs. Fuel delivery is an important aspect to every vehicle, so order the DeatschWerks X3 Series fuel pump module plumbing kit recommended for your application.

Not Yet Reviewed

$799.00

PSC Power Steering Pumps

PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.

4.03 out of 5 stars ( 58 )

$807.50

On Sale

Holley Fox Body Fuel System Kits

Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance

Not Yet Reviewed

$1,075.95

$967.95

On Sale

Holley EFI LS Hi-Ram Intake Manifold Bases

Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.

5.0 out of 5 stars ( 1 )

$921.95

—

$1,024.95

$828.95

—

$921.95

On Sale

Holley SBF Hi-Ram EFI Intake Manifolds with Side-Mount Tops

Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold

Not Yet Reviewed

$1,299.95

$877.45

On Sale

Holley EFI LT1 Gen V Hi-Ram Intake Manifolds

Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band

5.0 out of 5 stars ( 2 )

$1,075.95

$967.95

On Sale

Holley Sniper EFI Fabricated Race Series Intake Manifolds

Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.

4.0 out of 5 stars ( 1 )

$1,449.95

$825.47

Jaz Products Pro Sport Fuel Cells with 45 Degree Flapper Filler

Jaz Pro Sport fuel cells with 45 degree flapper filler will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * 45 degree filler neck with spring-loaded flapper 4 1/4 in. high * Choice of 2 1/4 in. or 2 1/2 in. neck diameter * One -8 AN tipover valve vent fitting

4.2 out of 5 stars ( 5 )

$752.99

—

$999.99

Jaz Products Pro Sport Fuel Cells with Fill Valve and Steel Cap

Jaz Pro Sport fuel cells with fill valve and steel cap will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities is intended to meet your needs and wants perfectly. Jaz Pro Sport fuel cell features: * IMCA-approved * One -8 AN tipover valve vent fitting * Spring-loaded flapper for rollover protection* Large 4 in. diameter steel cap allows quick removal and easy filling

Not Yet Reviewed

$752.99

—

$985.99

Jaz Products Pro Sport Fuel Cells with Fill Valve and Flapper

Jaz Pro Sport fuel cells with fill valve and check valve flapper will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities is intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * IMCA-approved 12-bolt fill valve with check valve flapper * One -8 AN return fitting * One -10 AN tipover valve vent fitting * Bat-wing attached to pick-up hose to prevent curling or moving

4.2 out of 5 stars ( 5 )

$751.99

—

$906.99

On Sale

Holley EFI Gen III Hemi Hi-Ram Intake Manifolds

Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles

4.0 out of 5 stars ( 2 )

$1,024.95

$921.95

Jaz Products Pro Sport Fuel Cells with Plastic T-Handle Cap

Jaz Pro Sport fuel cells with plastic T-handle cap will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, with or without tip over valve flapper under cap assembly, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities is intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * D-ring bail handle cap assembly * One -8 AN tipover valve vent fitting * With or without tipover valve flapper under cap assembly

3.89 out of 5 stars ( 9 )

$803.99

—

$888.99

Jaz Products Pro Sport Fuel Cells with 90 Degree Filler Neck

Jaz Pro Sport fuel cells with 90 degree quick filler/flapper neck will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Spring-loaded flapper with no cap for quick fill * One -8 AN tipover valve vent fitting * 2 1/2 in. neck diameter with 2 in. height

Not Yet Reviewed

$752.99

—

$985.99

On Sale

Holley LS Modular Lo-Ram EFI Intake Manifolds

Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors

4.38 out of 5 stars ( 8 )

$1,024.95

—

$1,049.95

$921.95

—

$943.95

27 Results Found For "8an fitting"