Availability
Showing In Stock Items. Show All 54 Items.
On Sale
Painless Performance 23-Circuit chassis harnesses are the most comprehensive wiring harness available for your 1966-1977 Ford Bronco. Utilizing input from the early Bronco community and after months of research and development this new precedent in Bronco wiring has emerged. Features include: * Ford color coded wiring to match factory schematics * Full weatherproof design * Composite glove box for mounting the main 20 circuit weatherproof fuse block * 9 accessory wires pre-wired on individual circuits in the fuse block allow each harness to be custom tailored to each vehicle * 2 fused fuse blocks, a turn flasher and hazard flasher, and horn relay * Full color 80 plus page instruction manual * Full lifetime warranty
( 1 )
$894.99
$805.49
On Sale
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$845.70
—
$1,076.75
$761.13
—
$969.08
On Sale
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$888.99
—
$1,304.99
$755.64
—
$1,109.24
On Sale
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$1,113.55
$1,002.20
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
On Sale
MSD 7AL-3 ignition boxes have been a favorite of sportsmen and racers that want adjustments at their fingertips. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. These ignitions combine high-output spark energy for high-compression race engines, combined with the most popular drag racing accessories, including a 3-step rev limiter, 4-stage retards, a start retard, and an rpm-activated switch. MSD is re-launching the 7AL-3s with upgraded features, a new look, and updated internal components, including surface mount circuitry. The new 7AL-3s are easy to spot with a black anodized housing and a new adjustable start retard circuit. Racers will also be happy to learn that the ignition can now be used on 4, 6, or 8-cylinder engines! Additional features include: * Fits the same mounting footprint as the original 7AL-3 * Start retard is adjustable with plug-in retard modules * Retard stages require positive 12 V to activate * Surface mount assembly reduces internal components
( 30 )
$1,099.95
$988.95
On Sale
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
$988.95
On Sale
Holley EFI Digital Dash gauges are completely customizable, with a variety of gauge and indicator screens that can be programmed to display any parameter you need. They also offer a virtual switch panel, user-defined alarms, configurable shift lights, and can control on-screen playback of your EFI data logs. The Holley EFI Digital Dash gauges measure 7.5 in. wide, 4.625 in. tall, and 1 in. deep, which makes them compact, customizable dashes for use in a variety of motorsports applications. The digital dash gauges feature a low-glare, high-brightness, high-contrast 800 x 480 resolution, a full-color touch screen for easy viewing even in full sun, and plug and play connection to all Holley EFI systems, as well as a weatherproof aluminum housing featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance! Features include: * Quickly toggle between two or more active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel (replaces the need for physical switches) * User-defined alarms for any input * Configurable progressive shift lights and light bar * On-screen playback of EFI data logs * Download and save Holley EFI data logs to external USB memory stick * Expandable internal storage on micro SD card * Flexible mounting options * Support for future USB devices * Upgradable with future software enhancements * Multiple units can be used simultaneously on a Holley EFI system for larger dashboards * Internal 3-axis accelerometer
( 10 )
$899.95
$808.95
On Sale
Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems
( 10 )
$1,014.99
$913.49
On Sale
Brothers Trucks one-piece window kits for your classic Chevy/GMC truck eliminate the vent window, giving your truck a smooth appearance and great operation. The special cut glass provides complete sealing around the window, and is painstakingly designed for easy installation and use. Most kits will do both doors and are available with clear or tinted glass. Brothers offers power conversion kits complete with switches, as well as kits for manual and existing power window applications. Brothers Trucks one-piece window kits include glass, felt channels, glass scraper set, hardware, and any other parts that may be needed. Choose the kit designed for your truck.
( 8 )
$999.95
$898.95
On Sale
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
$988.95
On Sale
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$999.95
$898.95
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,149.95
—
$1,249.95
$1,033.95
—
$1,123.95
On Sale
Classic Instruments 1960-1963 Chevy truck package gauge sets feature a speedometer, tachometer, fuel, oil, temperature, and volt gauges, and a 12 V quartz clock decked out in a Black or White color scheme. The all-electric cluster with easy snap-in wiring harness arrives ready-to-install directly into the stock dash of your 1960-1963 truck, no cutting or alterations necessary. The gauge cluster includes Classic Instruments' Zeus Speedometer Technology built right in, which means no external control boxes, it's designed to re-use the factory dash bezel to maintain the original styling of the vehicle, but has been upgraded with bright Halo/backlighting hybrid LED lighting for even illumination and clear nighttime readability—light dimming control is built-in. Everything else needed to install the package is provided in the kit, including a scratch-resistant acrylic lens and all necessary sending units. No need to worry about fuel sending unit compatibility either, the cluster features a fuel sending unit selector switch to pair it with the existing factory fuel sending unit, no new sending unit necessary. Order the Classic Instruments Chevy truck gauge package designed to fit your year/make and model.
Not Yet Reviewed
$1,099.95
$988.95
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$849.95
—
$1,049.95
$763.95
—
$943.95
On Sale
Aeromotive Phantom Flex fuel systems go green for high octane performance! Okay, you want to switch to EFI or drop in that late model motor. Question: What do you do for a tank? Answer: Phantom from Aeromotive. Problem: You want to run E85. Solution: Phantom Flex fuel systems. Now you can make the switch without welding in sump pumps, without losing your trunk space, and without the common fuel handling issues. They allow you to put a fuel pump inside your factory tank capable of supporting big horsepower EFI or carbureted. And it's whisper quiet! Plus, the Flex lets you choose renewable energy (even with its problems--corrosive nature and stoichiometric ratio) E85 is no match for the sealed electrical connections and powerful 450 pump. The quiet, powerful, feel-good-choice for your swap--Aeromotive Phantom Flex fuel systems. Features include: * 450 Stealth fuel pump * Gas-Supports 800 horsepower EFI forced induction, 1,100 horsepower EFI naturally aspirated * Gas-Supports 950 horsepower carbureted forced induction, 1,300 horsepower carbureted naturally aspirated * E85-Supports 550 horsepower EFI forced induction, 750 horsepower EFI naturally aspirated * E85-Supports 700 horsepower carbureted forced induction, 900 horsepower carbureted naturally aspirated * Black anodized top hat * 3-ORB-06 ports--supply, return, vent * Large capacity fuel-resistant baffle/basket * Foam and bladder * Universal high flow pre-pump filter * Modular design allows fitment to almost any fuel tank * Turbine pump mechanism increases durability * In tank use only
( 3 )
$837.10
$753.39
On Sale
Go Rhino E1 electric running boards allow you to step in and out of your truck, Jeep, Bronco, or SUV with ease. Open your door and the E1 Boards automatically deploys, providing a secure 6 in. wide durable aluminum running board with an anti-slip surface. For additional safety and security, the integrated LED lights turn on automatically when the board deploys. Close your door and the E1 Board automatically retracts, providing your vehicle with optimal ground clearance and protection for its rocker panel while preserving the look of your vehicle. With dual motors on each E1 Board, Go Rhino's electric running boards are reliable even in extreme climates. The easy-to-install, magnetically activated door switches leave your OBD port free for other accessories. An automatic safety stop, and manual override capabilities are included. Go Rhino's E1 electric running boards are available in a textured black powdercoat or their exclusive protective bedliner coating, and they come with a Limited Lifetime warranty on materials and construction with a 5-year warranty on the textured black powdercoat finish. Choose the perfect fit for your vehicle. Additional notes and benefits: * Automatic "SAFE-STOP" engages if an object in the board's path is detected * Interior bypass switch to manually override automatic deployment when needed * End Caps are black nylon construction (no powdercoat or bedliner coating) * Up to 300 lbs. per stepping area, per side
( 2 )
$1,299.99
$1,104.99
On Sale
Classic Instruments 1964-66 Chevy truck package gauge sets feature a speedometer, tachometer, fuel, oil, temperature, and volt gauges, and a 12 V quartz clock in one of four color schemes: black, tan, white, or gray. These direct-fit all-electric clusters with easy snap-in wiring harnesses arrive ready to install directly into the stock dash of 1964-66 trucks; no cutting or alterations are necessary. Even better, they include Classic Instruments' Zeus Speedometer Technology built in, which means no external control boxes. Their truck packages are designed to re-use the factory dash bezel (bezel not included) to maintain the original styling of your vehicle, but they've been upgraded with bright LED lighting for even illumination and clear nighttime readability. Everything else needed to install the package is provided, including a scratch-resistant acrylic lens and all necessary sending units. No need to worry about fuel sending unit compatibility, either; the cluster features a fuel sending unit selector switch to set it for compatibility with the existing/factory fuel sending unit, so no new sending unit necessary. Choose the gauge panel color that best suits your vehicle.
( 2 )
$1,099.95
$988.95
On Sale
NOS Cheater nitrous oxide systems are designed with the serious racer in mind. They feature larger nitrous and fuel solenoids than the Powershot systems and can be adjusted in a matter of seconds to add an additional 150 to 250 hp, simply by changing fuel and nitrous jets. They use a thin, 1/2 in. injector plate that fits between your carburetor and intake. Highly accurate spray bars within the plate simultaneously inject both nitrous and fuel into the manifold, creating a smooth rush of extra power on demand. Kits are also available without the bottle or injector plate. They are not recommended for intake manifolds with a separate inlet for each carburetor throttle bore, except for 3 x 2-barrel setups. Racing fuel is recommended. Most kits come complete with: * Unfilled nitrous bottle * Cheater nitrous and fuel solenoids * Injector plate * Filters * Fittings * Four stages of jets * Switches * Aircraft-quality stainless steel braided hose * All other necessary hardware for a complete installation
( 11 )
$1,099.95
$988.95
On Sale
Switch to the Darkside! Hooker Competition Darkside ceramic coated headers feature an exclusive proprietary black ceramic coating that offers a more refined texture and better appearance. They are manufactured from durable 16-gauge steel and have 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. These headers provide improved thermal resistance up to 1,700 degrees F, limiting heat migration through the header and reducing underhood temperatures. Unless otherwise noted, they are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 10 )
$899.95
$808.95
On Sale
B&M Pro Bandit shifters are the ultimate combination of design, function and sheer performance. Pro Bandit shifters feature narrow body construction with an easy-to-operate, gate-type mechanism for consistent shifts, round after round. CNC machined from 6061-T6 aluminum, Pro Bandit shifters are then polished and clear anodized for corrosion resistance and great looks. Other features include a reverse lockout that meets both NHRA and IHRA requirements, a built in neutral safety switch, and a rear exit shifter cable.
Not Yet Reviewed
$899.95
$808.95
On Sale
ARB twin portable air compressors are compact high-output pneumatic sources that permit rapid inflation of large tires, as well as the high-volume air needs of most air-powered tools. They're designed, built, and tested to commercial/industrial standards to survive harsh and demanding conditions. ARB twin portable air compressors feature: * Ultra-compact twin motor, dual-cylinder design for high flow * Integrated aluminum air tank and pressure switch regulates pressure between 135 psi (930kPa) and 150 psi (1030kPa), which suits most air-powered tools * Mounted in a waterproof carry case constructed from a durable impact-resistant polymer—with convenient compartments for storing the air hose and other compressor accessories * Ducted IP55 sealed brushed DC cooling fan and anodized aluminum motor mounting brackets effectively dissipate heat from the motors, heads, and electronics, allowing for a 100 percent duty cycle (under room temperature conditions) * Fully serviceable with replacement parts * Built with sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum trouble-free life * Motors are thermal cut-out protected against damage caused by extreme temperature use * High-density and high-flow washable sintered bronze air filter element * Pressure switch and relay-equipped electrical system prevents run-on when not filling, or any damage to compressor or hoses as a result of the pressure generated from a kinked air line * Over-pressure safety valve-equipped as a back-up protection from either pressure switch failure, thermal over-pressure generated in a hot vehicle, or accidental connection to an external high-pressure source
( 1 )
$1,059.95
$953.96
On Sale
Nitrous Outlet dual nozzle nitrous systems flow with power! Out of the box, these systems are ready to safely add big horsepower to your vehicle—but with additional jetting the dual-stage, dual-nozzle systems can add even more. These complete universal systems include everything you need for an easy, clean install. You have a choice of bottle capacities or no bottle with your kits. All include dry nitrous nozzles, nitrous solenoids, hardware, wiring, wide open throttle switch, solenoid brackets, main feed line, and dual nozzle jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$924.99
—
$1,287.99
$786.24
—
$1,094.79
On Sale
Nitrous Outlet EFI single nozzle systems come with more jets to set horsepower exactly where you want it. They include everything needed to add horsepower to your late model EFI vehicle--hardware, wiring, jetting, solenoids, hoses, and a nozzle. They also include a wide-open throttle (WOT) switch that only allows the systems to be activated when the motor is at full throttle. This feature will help in preventing engine damage and lean spikes. Get Nitrous Express race-proven systems because of their quality components and extreme performance.
Not Yet Reviewed
$891.99
—
$1,206.99
$758.19
—
$1,025.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
