Free Shipping on Orders Over $109 at Summit Racing

OTC Hub Grappler Kits

OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs

3.67 out of 5 stars ( 3 )

$896.99

Lang Tools Axle Nut Sockets

Lang Tools axle nut sockets are designed for use with a torque wrench when servicing truck wheel bearing locknuts. These performance-proven, quality axle nut sockets are offered in an array of sizes to fit any need. Features to choose from: * 3/4 in. square drive or 1/2 in. square drive * Full range of six- and eight-point sizes * Individual metric and standard sizes, as well as sets are available * Steel with gray powdercoat or chromoly with black phosphate finish

5.0 out of 5 stars ( 2 )

$755.99

Sunex Tools 22-Ton Air/Hydraulic Truck Jacks

Sunex Tools 22-Ton Air/Hydraulic truck jacks are your portable, heavy duty solution for truck and trailer shops, rail and bus work, and roadside service calls. These jacks feature a narrow chassis design, with a contoured base. This design allows them to easily fit between tandem wheels, and so wheels make contact with the ground when the jack is not under load, then raises them off the ground when under load to prevent damage. Wiper seals protect Sunex Tools 22-Ton Air/Hydraulic truck jacks' hydraulic system from contaminants, while overload and bypass safety valves prevent the jack from being used beyond rated capacity and ram over extension. A self-retracting ram lever on the release knob on top of the handle operates independently of the handle locking lever. These jacks also feature an integrated filter to protect their air motor. Four adapters are included.

5.0 out of 5 stars ( 1 )

$782.99

—

$999.99

OEM Automotive Tools 22-Ton Air/Hydraulic Truck Jacks

OEM Automotive Tools 22-ton air/hydraulic truck jacks are designed to easily lift heavy-duty vehicle axles to reduce back-aching work. They feature a low-profile compact design to fit between dual tandem axles, a strong air-powered motor, and large rear wheels. Ram and screw adjustments provide 9.25 in. of travel, allowing 17.75 in. total height. If you spend time working on heavy-duty equipment, you'll appreciate owning an OEM Automotive Tools 22-ton air/hydraulic truck jack.

Not Yet Reviewed

$899.95

Milwaukee M18 FUEL PACKOUT with VACLINK 9 Gallon Dual Battery Dust Extractors

The Milwaukee M18 PACKOUT with VACLINK 9-gallon Dual Battery Dust Extractors set the standard for cordless dust extractors with strong performance and unmatched versatility. The automatic filter cleaning mechanism provides the highest sustained airflow to maintain productivity during dust extraction applications. This mechanism, paired with two HEPA filters, delivers OSHA Table 1 Compliance. The dust extractor tools have versatile power with corded and cordless capabilities for all-day productivity. With VACLINK, an integrated wireless dust control technology, compatible tools and remotes connect to the dust extractor, allowing for activation from the dust-producing application for increased efficiency. The POWERSTATE brushless motor delivers 125 cfm when utilizing M18 batteries (included in kit only) and 175 cfm when the unit is plugged-in. Two M18 REDLITHIUM FORGE HD12.0 batteries are required for operation (only included in the full kit with M18 charger). Please specify if ordering just the tool or if ordering the full kit with the included M18 batteries and M18 Dual Bay Simultaneous Super Charger. Product Highlights: * Optimized for concrete dust, drywall dust, and sawdust, the low flow indicator communicates if flow drops below optimal performance * Also capable of wet clean-up, water sensors indicate if the tank is full * Included 36mm x 10 ft. anti-static hose and attached hose clip connect to included power tool and table saw adapters that allow for efficient dust collection when paired with other tools * This extractor is PACKOUT compatible for convenient transportation and storage and offers ONE-KEY track and manage compatibility Bare Tool comes with the following components (except REDLITHIUM FORGE HD12.0 batteries and M18 Dual Bay Simultaneous Super Charger, included in full kit only): * M18 FUEL 9-gallon Dual Battery Dust Extractor with PACKOUT Compatibility and VACLINK * VACLINK Wireless Dust Control Remote * HEPA filter (2-pack) * 10 ft. Accessory Hose * Fleece Dust Bag * Power Tool Adapter * Table Saw Adapter

Not Yet Reviewed

$899.00

JET IBGB-436 Combination Grinder and Belt Sanders

The JET IBGB-436 combination grinder and belt sanders key advantages include robust construction, maintenance-free bearings, dust collection ports, and a high-quality cast iron table, making these bench grinders a reliable tool for demanding workshops needing both grinding and sanding functions in one machine, with variable-speed options for finer control. Key features: * CSA/CUS Certified * Industrial strength construction for demanding usage * Powerful one horsepower motor * Innovative safety guarding surrounding the sanding belt * Large 'eye' protective safety shields * Rubber sealed bearings for maintenance-free sanding on idle wheel * Safety switch with removable key * Totally enclosed, pre-lubricated ball bearings * Two 2 in. round dust ports

Not Yet Reviewed

$957.99

Milwaukee M18 FUEL Dual-Battery 12-Gallon Wet/Dry Vacuums

The Milwaukee M18 FUEL dual-battery 12-gallon wet/dry vacuums bring unmatched performance, durability, and versatility to clean up more common jobsite debris. The wet/dry vacuum's dual-battery motor head requires two battery packs (sold separately from bare tool) or included in the complete kit to operate, and clean up more jobsite debris, such as drywall dust, concrete dust, and wood/metal shavings than 4.25 peak HP wet/dry vacs in the same amount of time. An included high-efficiency filter ensures optimal dust and microparticle collection. The M18 FUEL dual-battery 12-gallon wet/dry vacs feature the most durable wheels with reinforced casters and tread design that result in up to 8X wheel life, and a crush/twist-resistant hose construction that delivers up to 2X hose life. Key features: * M18 FUEL dual-battery 12-gallon wet/dry vacs are part of the most versatile vacuum system with interchangeable motor heads, tanks, and carts for varying performance, holding capacity, and mobility with easy access foot pedal * MAX POWER MODE delivers up to 49 minutes of continuous cleaning, and up to 1,600 sq. ft. of debris clean up per charge on REDLITHIUM High-Output HD12.0 battery packs (batteries included in complete kit only) * Includes large high-efficiency filter that ensures optimal dust and microparticle collection * Milwaukee fleece dust bags can be used for less debris build-up on the filter (sold separately) * Quickly swap or clean filters with the easy access quarter-turn design * Premium wet/dry vacuum cart has large wheels and small size casters on the front, along with a 3-position telescoping/removeable handle * Four latching points on the motor head store and secure vacuum tool storage bag (storage bag sold separately) * Cart accessory storage allows for easy access to accessories when needed

Not Yet Reviewed

$949.00

OTC Revolver Engine Stand Adapter Plates

OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.

5.0 out of 5 stars ( 2 )

$806.99

Evolution S14MCS 14 in.Metal Cutting Mitering Chop Saws

The professional's metal cutting saw, Evolution S14MCS 14 in. metal cutting mitering chop saws deliver the ultimate metal cutting experience.  Featuring the advanced EVOMAX ultra-long-life blade, a powerful EVOMAX intelligent motor, and Evolution's innovative mitering base, the S14MCS saws set a new standard in accuracy, performance, and reliability. These features, along their cold cut technology, provide 4 times faster cuts than abrasive saws, that are virtually spark-free, leaving a burr-free, cool-to-the-touch cut, straight from the saw. Plus, the precise +/-46-degree mitering base allows you to make accurate miter cuts without repositioning your workpiece. You can work efficiently and effectively while maintaining a cleaner, safer workshop with no airborne abrasive dust, thanks to the Evolution S14MCS 14 in. metal cutting mitering chop saw. Features and benefits: * EVOMAX 15-amp intelligent motor with active blade speed optimization extends blade life by up to 30 percent  -- Soft start reduces electrical current spikes, preventing breaker trips, and reduces mechanical stress, extending motor life -- Electronic blade brake stops the blade in seconds for safer, faster working * EVOMAX cermet carbide blade -- Proven to make 3500+ cuts through 4 in. mild steel round tube -- 80 cermet carbide teeth deliver clean, accurate cuts -- Handcrafted in Japan for unmatched quality * Dual sliding front clamps move on three axes to secure any workpiece shape or size * Quick-release clamps and tool-free adjustments for quick saw setting * 3-position cutting head lets you shift the blade path forward for optimized cutting and extended blade life * Shadow line cut guide clearly shows where the blade will cut, making workpiece alignment easy and accurate. Unlike a laser guide, the bright LED works in all environments and will never go out of alignment. * A 1/4 in. steel plate reinforces the fence to prevent flex during heavy clamping * Structural ribs strengthen the base * Convenient onboard hex wrench storage for fast blade changes * Knurled finish on fence and clamp face securely grips workpiece, supports accuracy * Ergonomic horizontal handle and trigger for all-day comfort * 1,100 rpm no-load speed * 10 ft. rubber cord

Not Yet Reviewed

$1,000.00

OTC Truck Clutch and Flywheel Handler Jacks

Make changing truck clutches and flywheels easier with one of these OTC handler jacks. The open stance of these jacks makes for easy access to work. OTC's unique linkage design raises the load from horizontal to vertical as the pump is cycled. This eliminates any lifting of the clutch by the operator. OTC manufactures these jacks with a 360 degree head and swivel casters for easy moving.

Not Yet Reviewed

$831.99

JET Bench Grinders

You won't believe how smoothly these JET bench grinders run! They are great power tools that show tremendous attention to detail. Well-built, with a powerful motor, these bench grinders are more than capable of handling any job that the average homeowner would encounter, as well as withstand the high-volume demands of even the busiest shops. These high-quality machines are designed to grind, sharpen, and smooth out rough material surfaces—delivering work power and pristine finishes! Additional features: * UL listed * Totally enclosed pre-lubricated ball bearings * Rubber mounts prevent movement * Cast iron wheel guards and dust vents * Includes aluminum oxide grinding wheel * One-piece quick-adjusting spark guards * Large eye shields with quick adjustment * Adjustable tool rests * Fine and coarse vitrified grinding wheels included

4.75 out of 5 stars ( 4 )

$791.99

—

$934.99

OTC 4-Ton Capacity Forklift Jacks

OTC 4-Ton capacity forklift jacks feature a low starting height of 2 5/8 in. and a maximum lifting height of 16 1/4 inches. The 2-position lift pad permits handling of all lift truck configurations with flat or edged surfaces. These forklift jacks feature high-quality seals, high-strength steel construction, and a 30 in. long handle, with stop, that makes for easy maneuverability around the shop or workspace. Quality and value are at the core of OTC products.

Not Yet Reviewed

$839.99

JET 5 in. x 6 in. Horizontal/Vertical Band Saws

Smaller shops and job sites alike benefit of power and precision when the JET 5 in. x 6 in. Horizontal/Vertical band saw is put into action. These metal working band saws feature a UL-listed, single-phase motor and are powered by a 1/2 hp motor, and with two large diameter wheels and a built-in handle, you will have easy movement for added efficiency. In addition, you can ensure level and accurate cuts using the adjustable leveling pads. With a long list of great features, these JET 5 in. x 6 in. Horizontal/Vertical band saws are a must-have for your work operation! Tool features include: * Heavy-Duty 14-gauge steel stand with shelf that is redesigned for stability, rigidity and ease of use * Blade drive is a sealed, steel, heat-treated worm driving a bronze worm gear in an oil bath * Handle and wheels for easy movement * Ball bearing supported blade wheel * Fully adjustable ball bearing blade guides * 3-blade speeds * Auto shut off after cut * Vertical worktable * Adjustable material stop * 1/2 in. carbon steel blade

Not Yet Reviewed

$934.99

Evolution S355MCS 14 in. Mitering Chop Saws

Built for professionals, the Evolution mitering chop saws are the first 14 in. TCT industrial chop saw that allows you to produce accurate miter cuts without having to reposition the workpiece. They are designed to tackle heavy cuts in oversized metal pieces, and feature a precision adjustable miter table, 3-position saw head, and a unique, height adjustable front clamp rail assembly. These mitering chop saws deliver precise and quick angle adjustment for easy set-up and a powerful clamping mechanism to ensure quality, repeatable cuts every time. With a powerful 15A motor, easy ambidextrous controls, and a bench dog compatible base plate with a tough knurled back fence, the Evolution 14 in. mitering chop saws are easy to rely on—even for your toughest jobs. Features include: * 15A 120V 60Hz Motor * 1,450 rpm speed without load * Plus or minus 46 degree maximum bevel (left) * 10 ft cable length * 66 tooth 14 in. blade with 1 in. bore and 0.094 in. kerf included * Product dimensions assembled are 28.25 in. long x 26.00 in wide x 27.50 in. high * Product weight is 77 lbs. Cutting capacities: * 0.500 in. mild steel plate * 0.203 in. (13/64 in.) stainless steel plate * 4.75 in. x 4.75 in. square tube at 90 degrees * 4 in. x 4 in. square tube at 45 degrees ML * 1.75 in. x 1.75 in. square tube at 45 degrees MR * 6.5 in. x 4 in. rectangle tube at 90 degrees * 4.5 in. x 1.75 in. rectangle tube at 45 degrees * 4.75 in. round tube at 90 degrees * 4 in. mild steel round tube at 45 degrees * 5/16 in. minimum cut off piece length

4.8 out of 5 stars ( 5 )

$1,000.00

Lenco LencoPull 120 V Portable Dent-Pulling Systems

Lenco 120 V portable dent-pulling systems simplify the repair of auto body dents. No holes to drill, no more draw pins to cut and grind! With LencoPull units, you just weld the star tip to the damaged panel by pressing the trigger, then pull out the dent, and twist the tool to remove ... you're done! These systems have their own specially-designed transformers and can make multiple pulls without changing tools. Let Lenco save you valuable time and money with their portable dent-pulling systems. LencoPull 120 V system features include: * Built-on slide hammer for one-step operation * Heat-shrinking tip * 7 ft. welding and ground cable leads * 25 ft. power cable

Not Yet Reviewed

$979.99

John Dow Portable Fluid Evacuators

John Dow portable fluid evacuators are designed to remove used oil and other non-flammable fluids from any vehicle, when conventional draining methods are not practical. These manual transfer pumps operate using compressed air and an on-board venturi vacuum system. Features include: * Available in 6- and 20-gallon capacities * Heavy-duty steel construction * Powerful venturi vacuum system * Easy-to-read vacuum gauge * 7 ft. suction hose * Six suction probes for most applications * Three OE-style evacuator adapters * Convenient storage tube for suction probes * Wheels and casters are oil- and chemical-resistant for longer life * Self-evacuating with 10 ft. quick-disconnect evacuation hose * Sight tube for quick indication of fluid level * 20 gallon models have swivel casters on the front * JDI-20EV-B features a 2-gallon transparent bowl that is heat-resistant to a maximum temperature of 212 degrees F

5.0 out of 5 stars ( 2 )

$909.99

John Dow 30-Gallon UL Listed Steel Gas Caddies

John Dow 30-gallon UL listed steel gas caddies are designed for the professional automotive service facility. They're tested and approved to UL requirements for leakage, rupture, stability, abuse, and endurance. John Dow steel gas caddies meet OSHA-approved standards--with safety being a number one priority. Features and benefits include: * UL listed cast iron pump * 10 in. steel wheels * Fill level gauge * Fire-screened vent and filler neck * Wide footprint for stability * 8 ft. PVC suction/discharge hose with internal steel grounding wire * Tank ground wire and clamp * 2-way filter kit sold separately

3.33 out of 5 stars ( 3 )

$899.99

Portatree Full Size Practice Trees

These Portatree full size practice trees are just what you need for practicing like a professional. They are national event quality available for you. These kits will require the Eliminator practice tree, sold separately, to run them.

5.0 out of 5 stars ( 3 )

$999.99

Lincoln Electric Easy-MIG 140 Welders

With simple 2-knob tapped control, the Lincoln Electric Easy-MIG 140 welders are easy to set up for gas-less flux-cored welding for deep penetration on thicker steel, or gas-shielded MIG welding on thin-gauge steel, stainless or aluminum. They feature smooth-arc starts with minimal spatter and a wide 30-140 amp welding output range. You can MIG weld 24 gauge up to 3/16 in. (4.8 mm) sheet metal in a single pass. Weld up to 5/16 in. (7.9 mm) steel using self-shielded Lincoln Electric Innershield (FCAW-S) wires. The special, precise wire drive gives brass-to-brass gun connections for enhanced connectivity and full adjustment to reduce the chance of wire tangling and crushing. Lincoln Electric Easy-MIG 140 welders' Power Chassis funnels in airflow to cool power systems, structurally secures key components, and traps wires and cables to avoid unnecessary abrasion.

4.43 out of 5 stars ( 7 )

$799.99

BendPak Portable Wheel Kits

BendPak portable wheel kits are designed for use on BendPak HD-9 series lifts. They provide mobility for easy movement and storage and can be added or removed easily. The kits feature heavy-duty construction for maximum durability.

4.3 out of 5 stars ( 10 )

$825.00

South Bend Clutch Dyna Max Organic Clutch Kits

South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.

4.71 out of 5 stars ( 101 )

$825.37

—

$986.46

Clearance

Firman Inverter Portable Generators

Firman offers inverter portable generators in a variety of sizes and fuel tank capacities. Quiet and easy to use, they're built for fun, safe for all sensitive electronics and ideal for camping, tailgating and recreational use power supply. The generators are made to endure every condition, from cold winter nights to hot summer days and everything in-between. These air cooled 4-stroke gasoline engine units are available in different AC outputs and wattage, outlet type, and recoil, electric, or remote start options. They feature a built-in inverter, and larger models include caster wheels. (Gasoline/propane dual fuel inverter is also available.)

Not Yet Reviewed

$999.99

$786.50

BendPak Aluminum Approach Ramp Kits

Go easy on your back when you use BendPak aluminum approach ramp kits in conjunction with BendPak HD-7 and the BendPak HD-9 Series lifts. They come complete with a pair of low-profile aluminum ramps, the quick-mount brackets, and all of the necessary hardware to make ramp removal and installation a cinch. These lightweight ramps have an attractive diamond plate finish to provide a non-slip surface.

4.57 out of 5 stars ( 14 )

$975.00

John Dow Fluid Evacuator and Oil Drain Combos

John Dow fluid evacuator and oil drain combos are a versatile option that offers value for any shop or garage. These innovative two-in-one tools allow you to easily drain oil into a deep drawn funnel, or evacuate fluids with the special probes and adapters connected to the suction hose. And, when the tank's full and needs to be emptied, the task becomes quick, easy, and mess-free with the evacuation hose. Order the model best suited for your applications. Combo features include: * 20 gallon heavy-duty steel tank * Self-evacuating with 6 ft. discharge hose * Powerful venturi vacuum generator and vacuum gauge for proper suction level * Wheels and casters are oil and chemical-resistant for longer life * Six suction probes and three OE-style adapters with convenient storage tube * Sight tube for quick indication of fluid level *16 in. centered funnel with expanded metal screen * NOTE: Model JDI-20COMBOB is equipped with a 2-gallon transparent bowl, enabling you to check quantity and quality of oil prior to discharging into the tank below.

3.33 out of 5 stars ( 3 )

$992.99

113 Results Found For "tools"