Availability
Showing In Stock Items. Show All 42 Items.
Hook up to your GM manual transmission with Advance Adapters Gen III/LS Series flywheel and clutch kits. These conversion kits contain custom clutch components designed to adapt the Gen III/LS Series to your GM manual transmission. The flywheel is specially designed for the included high performance LUK clutch components. Do you have a special conversion? Advance Adapters LS series Gen III manual transmission conversion kits make change easier. Features include * Custom flywheel * 11mm flywheel bolts * 11 in. pressure plate and disc * Pilot bushing spacer * Throwout bearing * 10mm bellhousing bolts * 10mm lockwashers * XRP dowel bolts
( 4 )
$888.00
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$801.99
—
$811.99
FTI Performance MR Series torque converters are specifically designed for mud boggers needing an incredibly strong spragless unit without draining the bank. They're ideal for 400 to 1,200 hp weekend runners—and still perform well during occasional races. Features include a forged billet steel front cover, a billet spragless center, a hardened flanged impellor hub, and a steel anti-ballooning plate. Triple Torrington bearings, computer balancing, and furnace-brazed and heli-welded fins add to the list of reliable bulletproof MR Series parts. These converters provide excellent torque multiplication, better heat-dissipating oil flow, and impressive performance. Order the parameters desired and the model recommended for your transmission application.
( 2 )
$799.00
—
$849.00
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.
Not Yet Reviewed
$750.46
—
$1,094.75
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$999.99
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$754.36
—
$1,098.46
Quicksilver Q4 propellers provide outstanding hole shot, mid-range performance, and superior handling on high-horsepower walley boats, center consoles, and stern drive runabouts. The Q4 features four stainless steel blades, available in both left- and right-hand rotations. Additional details: * Works great on high-horsepower applications, heavy boats, and pontoon boats * Provides exceptional hull lift * Great for outboards and sterndrives * Crosses over to Mercury Revolution 4 * Equipped with PVS (Performance Vent System)
Not Yet Reviewed
$817.87
If you have limited space or height restrictions and need the holding capacity of a dual disc clutch, the RAM Concept 9.5 is built just for you! The RAM Concept 9.5 dual-disc organic clutch kits meet the need for a smaller diameter or more compact, shorter design to fit in applications with limited bellhousing space. Building on the highly successful Concept 10.5 and Force 9.5 complete dual-disc systems, Concept 9.5 kits incorporate a billet stand design that allows the use of any RAM or other flat flywheel to facilitate installation. RAM Concept 9.5 dual-disc clutch kits feature: * 300 Series organic friction material for applications up to about 700 hp * A higher clamp load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Concept 9.5 units are ideal for applications, such as road race or autocross vehicles
Not Yet Reviewed
$939.00
Beef up your GM chassis for less with 9 in. non-floater offset housing kits from Allstar Performance. These kits fortify your 1978-88 GM intermediate chassis with much stronger Ford 9 in. style. Allstar offset housing kits are delivered with 31-spline axles with bearings and seals installed, a select used center section, and new axle tubes with large-bearing late Ford/Torino-style ends. Choose between two available lengths. Give your GM rear-end some brawn with non-floater offset housing kits from Allstar Performance.
( 1 )
$999.99
Built ground up for Ultra4 rock racers, Spidertrax Off-Road Ultimate unit hub assemblies are truly the reinvention of the unit bearing itself. Genuine Timken bearings, full chromoly heat-treated construction, and a fully integrated drive slug makes the Ultimate unit bearing the only racing unit bearing of its kind—the last bearing you'll ever need. They use 5/8 in.-18 studs on a 5-on-5 1/2 bolt circle, designed specifically for Spidertrax 40 splined axle shafts. Drive cover sold separately. * Compact: With a span of just 2.125 in. from flange to wheel mount, the Spidertrax Ultimate unit bearing is the perfect fit for an Ultra4 solid or IFS (independent front suspension) axle. * Powerful: Spidertrax eliminated the need for a drive slug, packed in 40 splined axle splines, all while adding a 4.235 in. hub register for wheel centering and strength. * Secure: Spindle nuts are not only thread-locked into place, Spidertrax also uses a keyed lock ring. This means never having to worry about loosening spindle nuts.
Not Yet Reviewed
$799.00
South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.
Not Yet Reviewed
$754.35
—
$1,230.18
Strange offers their rear axle housings in a variety of configurations, from just the center housing to complete, ready-to-bolt-in assemblies. The axle housings are designed and manufactured to be more rigid and stronger than OEM housings. Depending on the application, they're fabricated from proprietary nodular iron (substantially stronger than cast iron) and other quality materials—then fixture-welded to ensure proper alignment; slotted for full tube engagement; and reinforced at critical areas to reduce center section and axle tube flex. Whether your car is headed for the street, the track, or the drag strip, customize the rear-end with a Strange rear axle housing so it will meet or exceed your expectations.
Not Yet Reviewed
$794.99
Quicksilver's revolutionary Q3 propellers improves both acceleration and top speed on center consoles, high-horsepower pontoons, and stern drive powered runabouts. The design consists of high rake angles and thin blades, resulting in the Q3 being the highest performing 3-blade propeller in the Quicksilver line-up. Additional details: * Available in different diameters and blade pitch options * Equipped with PVS – Performance Vent System * Polished stainless steel propeller * Revolutionary prop that improves both acceleration and top speed
Not Yet Reviewed
$817.87
Competition Engineering one-piece fabricated rear axle housings are CAD-designed and CNC-machined to be stronger and lighter than other styles. Their triangulated design provides the structural integrity required for racing. Made from chromoly or mild steel, the outer shell is 1/8 in. thick, and the faceplate is 1/4 in. thick. Configured for a 9 in. Ford, the housings come in either full-bodied car style, with cut-to-length 3 in. O.D. x .250 in. wall axle tubes, or dragster style, with big Ford forged housing ends aligned with the center section. The full style has an overall width of 60.75 in., the dragster style is 27.6 in. wide, and the faceplate accepts 3/8 in. studs. A drain plug, filler plug, and breather bung are included.
( 1 )
$840.99
—
$997.99
Spicer Drivetrain Products one-piece aluminum driveshafts improve acceleration, eliminate flexing and annoying clunks, and reduce the rotating mass of factory 2-piece driveshafts. Constructed from 6061-T6 aluminum tubing for strength, these replacements are lighter so your car can accelerate faster with a smoother, quieter ride. Order the model recommended for your transmission application. Features include: * Reduced overall weight and rotating mass of the driveline * Eliminates the need for a center bearing * Direct bolt-in with no need for an adapter * Available in a variety of lengths and diameters * Larger diameters allow for higher rpm with less noise, vibration, and harshness * 0.125 in. wall thickness * Includes hardware
( 8 )
$848.99
Rekluse Clutch Core Manual TorqDrive clutch kits allow more friction disks to fit the clutch, delivering smoother lever function, less clutch fade, and a more linear power delivery. In addition, the billet center hub and pressure plate work together to move more oil through the clutch, reducing drag and decreasing operating temperatures. The TorqDrive technology features thin friction disks and protective basket sleeves, while the Core technology optimizes oil flow, helping your clutch last longer, and reduces temperatures to maintain consistent performance even in extreme conditions. Join the clutch revolution with the Rekluse Clutch Core Manual TorqDrive clutch kit best suited for your application. Other product features and benefits include: * Reduced (10 percent) clutch lever pull strength for less hand fatigue * Expanded friction zone for increased control and smoother take-offs * Increase (20 percent) in torque capacity for reduced wear, reduced heat, and increased power transfer capability * Billet internal components provide enhanced durability and increased oil flow
Not Yet Reviewed
$869.00
—
$1,139.00
These Driveshaft Shop Level 5 axle systems have been the most copied drivetrain components for front wheel drive cars to date because they work great and are very affordable. The bar has been raised for these Level 5 axles. They use the 1.4 O.D. outer CVs from the Level 6 systems, and have made the center bar larger by changing from 1 in. to 1.125 in. (now 34-tooth). They also feature a redesigned inner CV with an even larger tripod design. These systems are made to handle up to 800 hp and 28 in. tires.
Not Yet Reviewed
$779.98
The Driveshaft Shop introduces Level 6 1400 hp axles for the 2010-14 Camaro V8. They've designed a new one-piece outer CV for the application that is not only stronger but more cost-effective to manufacture. This saves you money without sacrificing durability! These direct bolt-in axles feature CNC rolled splines for extra strength. Full 30 spline certified 300M center bars (not just 28 spline like a factory 108mm CV would use)—30 spline, like the Viper T56 and any upgraded T56. If the cages are stronger, the bars need to be also. The Driveshaft Shop has also included their certified 4340AQ cages REM polished with a re-designed radius on the cage window. Cages are full 4340, not the standard material that has been carbonized and made brittle.
Not Yet Reviewed
$1,024.98
The Driveshaft Shop's Level 4 axles are similar to their Level 5 models. The outer CV and the internals are made from high-grade chromoly. Original spline sizes are used to fit the stock hubs. To make sure the center bar is up to the task of hard launches, autocross, and rally demands, The Driveshaft Shop uses the new 300M material for extra strength. This material has proven to be, without a doubt, the strongest and most resilient bar material available to the company. Also, the inner CV was recently changed from a tripod design to a full ball and cage design—with a larger radius to the spline plug for added strength. So there you have it: a direct-fit axle that will withstand the most violent launches, time attacks, or rally applications. Order the Level 4 axles recommended for your vehicle.
Not Yet Reviewed
$849.99
Rekluse Z-Start Pro clutch kits are the best-selling products that have been raced, abused and relied on by tens of thousands of riders in more types of riding and racing worldwide than any other Rekluse product. First introduced in 2005, Z-Start Pro was the first auto-clutch to give the rider manual clutch lever override capability—and defined the ultimate in tunability to suit each rider's preferences and riding conditions. These clutches are well-known in the off-road racing world as bulletproof and the tamer of the nastiest terrain imaginable. They're available for a variety of ATV and off-road motorcycles. Features and benefits: * Faster cornering * Improved traction * Virtually eliminates stalling * Better starts * Faster lap times * Fully tunable to rider preference and terrain conditions * Highest grade CNC-machined billet, hard anodized aluminum clutch components. Handles extreme abuse and offers long lasting durability. * Fully adjustable; includes optional wave springs and ball bearings. Allows rider to achieve a matrix of truly custom settings to obtain great performance advantages. * CNC laser-cut drive plates perfectly match the center clutch with continuous radius spine technology, causing clutch loads to be evenly distributed over a greater surface area with more precise tolerances. Longer clutch component life, smoother engagement / disengagement, and less clutch hammering that virtually eliminates notching with even the most aggressive riders. * Center clutch design with innovative fluid dynamic oil flow technology. Cooler operating temperatures for less fade and longer clutch and clutch plate life.
Not Yet Reviewed
$989.00
ACT offers heavy-duty race transmission clutch kits for a variety of BMW applications. The kits feature ACT's most popular heavy-duty pressure plates—which use exclusive diaphragm design to increase clamp load, reduce deflection, and maximize clutch life. All diaphragms endure a 4-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. The 6-pad, spring-centered race discs feature a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. Spring retainers utilize wraparound spring windows and thicker retainer stampings for spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc (recommended for larger clutch sizes to absorb more heat), engagement is harsher, but shifting is faster. Available in sprung or solid hub style. * Feel: Light to moderate pedal effort, aggressive engagement, OE to mild gear rattle * Life: Moderate friction life, extended by ACT's exclusive diaphragm design * Quality: Carefully engineered, precisely assembled, accurately balanced; uses select ceramic friction materials for high heat tolerance and maximum performance * Recommended Use: Recommended for high horsepower street or race use * ACT Difference: 100 percent clamp load tested and dynamically computer balanced for smooth high RPM reliability Kits include: * Heavy-duty pressure plate * Alignment tools * 6-pad solid or sprung race disc * Release bearing
Not Yet Reviewed
$780.00
—
$1,142.00
ACT Heavy-Duty Performance clutch discs are available in solid or sprung hub styles. These kits feature ACT's most popular heavy-duty pressure plates, which use exclusive diaphragm design to increase clamp load, reduce deflection, and maximize clutch life. All diaphragms endure a 4-stage heat-treating process for unparalleled performance. Each pressure plate has precision cover stampings to provide rigidity and consistency. Additional details: * Light to moderate pedal effort, aggressive engagement, OE to mild gear rattle * Moderate friction life, extended by ACT's exclusive diaphragm design * Carefully engineered, precisely assembled, accurately balanced * Uses select ceramic friction materials for high heat tolerance and maximum performance * Recommended for high horsepower street or race use * 100 percent clamp load tested and dynamically computer balanced for smooth high RPM reliability Select from these two options and features: * ACT's 6-pad, SPRING-CENTERED race discs feature a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat. * ACT performance street RIGID-HUB discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. The chromoly hub is heat-treated for strength and durability. Rivet design and materials are carefully selected for maximum strength. These discs are the minimum weight street disc for faster shifts. ACT's street rigid-hub discs provide race-proven performance with street manageability.
Not Yet Reviewed
$805.00
ATI Performance automatic transmission drums eliminate the need for steel bushings and sleeves that can expand under heat and come loose, ultimately causing transmission failure. They come equipped with Torrington bearings and are designed to triple clutch life and lower ETs.
( 9 )
$969.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
