Availability
Showing In Stock Items. Show All 34 Items.
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$855.95
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 235 )
$852.99
—
$964.99
These Maximizer Street Performance torque converters are built with extra reinforcement and thicker mounting surfaces to withstand the additional load and vibration put through the drivetrain by a truck with performance modifications. By providing additional stall, your truck will see better initial takeoff and will not lug the engine when using big tires. Special attention is made to match the converters to the power range of most trucks that do double duty as off-road and daily drivers. Improved rear-wheel horsepower and elapsed times are some of the results.
( 7 )
$786.95
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$865.99
—
$891.99
On Sale
B&M Traveler torque converters are designed for use in motor homes, tow vehicles, or other heavy-duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. Stronger than a stock converter, these Travelers have been internally modified to provide about 300 rpm more stall speed. This helps in initial acceleration without sacrificing normal highway operation. Pressure tested, fully balanced, and manufactured for long life, these Traveler converters will get you moving and on your way.
( 3 )
$899.95
$808.95
For all of your driving needs, you'll enjoy the strength and feel of FTI Performance Diesel BA Series torque converters. These units include billet front covers, heavy-duty sprag modifications, and furnace-brazed and TIG-welded fins. Their single disc works great for everyday driving and moderate towing. BA Series converters provide more torque multiplication, lower transmission temperatures, improved acceleration—and when you can keep your right foot under control, better fuel mileage! Give your pickup truck the power to control your ride with an FTI Performance Diesel BA Series torque converter. Order the model recommended for your transmission application.
Not Yet Reviewed
$859.00
—
$959.00
Chevrolet Performance SuperMatic torque converters are tailored for performance. Designed for their crate engines and transmissions, these torque converters are built to match the power outputs of the engines and to help ensure optimal performance of your powertrain system. Your project is different than the next guys but Chevrolet Performance SuperMatic torque converters bring together your application for durable factory-engineered performance that will have you cruising in no time! Features include: * Steel billet front cover * Custom stator * Fully furnace-brazed pump and turbine * Heavy-duty lock-up clutch * Internal components static balanced * Fully vector balanced as an assembly
( 1 )
$1,127.36
—
$1,130.05
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$971.99
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$869.99
—
$895.99
RevMax Stage 3 billet single disc torque converters are designed for those who have lightly modified engines or for those that do not tow heavy weights. The showpiece of their converters is the patented torque converter stator sprag retainer which allows smoother clutch application for less strain on the input shaft. All Revmax Stage 3 converters are rated up to 350 horsepower or 700 ft-lbs. of torque. Give your ride the powertrain it deserves with an assist from the RevMax Stage 3 billet single disc torque converter best suited for your application. More product features, items, and specifications include: * CNC-machined billet one-piece front cover * Raybestos or Alto high-performance lockup friction * Proprietary input shaft seal * Billet bearing cap * Dual Torrington bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace-brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak tested * TCRS machine computerized high-speed balancing to less than 5 grams * Runout tolerances of less than 0.005 in.
Not Yet Reviewed
$995.00
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$891.99
If your diesel pickup truck has major power, or you consistently tow heavy loads, FTI Performance Diesel BA-3 Series torque converters are for you. With three disks, CNC-ported stators, and 4340 turbine splines, strength and performance are built in. Their billet front covers, furnace-brazed and TIG-welded fins, and heavy-duty sprag modifications combine for impressive units. FTI has tested these converters under extreme conditions, ensuring they'll stand up to your towing, driving, and performance racing needs. BA Series converters provide more torque multiplication, lower transmission temperatures, improved acceleration—and, when you can keep your right foot under control, better fuel mileage! Whether you drive a Cummins, Powerstroke, or Duramax, FTI Performance Diesel BA-3 Series torque converters put the power to the ground.
Not Yet Reviewed
$849.00
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$1,049.95
—
$1,217.95
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$923.99
—
$993.99
XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.
Not Yet Reviewed
$1,043.25
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 4 )
$771.62
—
$1,039.97
PEM Racing's Ford 9 in. rear-end housings, specifically designed for Grand National applications, provides a combination of strength, customization options, and maintenance ease, making them a popular choice for high-performance vehicles and race applications. The 9-inch design, particularly when used with a full floater setup like the Grand National, is built to handle significant power and torque. The large diameter of the ring gear contributes to the housings strength, making it more robust than other types of rear-end designs. PEM's custom housings, like their Grand National full floater, are often designed with thicker tubes and stronger materials for added durability.
Not Yet Reviewed
$770.99
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 101 )
$824.77
—
$986.46
Hot rods, off-road buggies, and even classic touring cars and trucks have all become homes to Dodge Cummins motors. South Bend Clutch Conversion clutch kits allow you to install one of these iconic motors into your ride while maintaining your stock 5 or 6-speed transmission. These kits include the flywheel and bolts, throwout bearing, pressure plate, organic disk, and alignment tool. Cummins motors are known for longevity, incredible grunts, and easy upgrades. Install one into your truck with South Bend Clutch Conversion clutch kits.
Not Yet Reviewed
$870.41
—
$986.46
South Bend Clutch stock replacement kits are an upgrade for your GM, Ford, or Dodge diesel rig. These single-disc kits offer organic friction material for smooth engagement with a high-quality construction for longer service life. The kits are available with or without a solid flywheel. Whether you need to replace your failing stock clutch or you want to increase your truck's horsepower and need a clutch that can keep up, South Bend Clutch has the best options for you. Select the stock replacement clutch needed.
( 5 )
$986.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
