Hand & Other Tools Tools & Shop Equipment - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

OTC Hub Grappler Kits

OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs

3.67 out of 5 stars ( 3 )

$896.99

Clearance

Lang Tools Axle Nut Sockets

Lang Tools axle nut sockets are designed for use with a torque wrench when servicing truck wheel bearing locknuts. These performance-proven, quality axle nut sockets are offered in an array of sizes to fit any need. Features to choose from: * 3/4 in. square drive or 1/2 in. square drive * Full range of six- and eight-point sizes * Individual metric and standard sizes, as well as sets are available * Steel with gray powdercoat or chromoly with black phosphate finish

5.0 out of 5 stars ( 2 )

$755.99

Yukon Gear & Axle Carrier Bearing Pullers

Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!

4.4 out of 5 stars ( 5 )

$769.99

Milwaukee M12 FUEL 1/2 in. Digital Torque Wrenches with ONE-KEY

The Milwaukee M12 FUEL 1/2 in. digital torque wrench with ONE-KEY is the industry's first torque wrench with a POWERSTATE brushless motor and digital torque wrench in one tool, delivering increased productivity, precise torque accuracy, and user demanded reporting functionality. The torque wrench delivers 50 percent faster installation time, replacing the hand tool or two tool installation process and providing more control to reduce the over-torqueing of fasteners. The battery powered torque wrench is equipped with Milwaukee ONE-KEY, giving you the power to track, report, and manage your tool. The tool will record all of the fasteners that are saved and produce a downloadable report via ONE-KEY for the necessary parties requiring the data. ONE-KEY allows you to wirelessly connect to a smartphone to customize the tool settings, track its location, manage inventory, and lock the tool out for added security and protection for your investment. Milwaukee offers the M12 FUEL digital torque wrench as a bare tool only; or in a kit with the digital torque wrench, two M12 REDLITHIUM CP2.0 batteries, M12 lithium-ion charger, and carrying case. Features and benefits: * Tool combines POWERSTATE brushless motor and a digital torque wrench into one tool * Faster, more productive torque reporting with ONE-KEY providing torque data and customizable reports for inspectors or owners * Adjustable run-down torque to control the tool's output torque via the motor to prevent over torque * Durable design to withstand the most demanding jobsite environments * Four measurement modes (lbs.-ft., lbs.-in., Nm, Kgcm) * Precise Torque Accuracy for torque critical fasteners * REDLINK PLUS Electronic Intelligence enables advanced communication between batteries and tools for unmatched performance, protection, and productivity * Compatible with all M12 batteries and chargers (included in kit only) * ONE-KEY technology allows for customization, tracking, tool security, and inventory management * Four notification modes that the tool is reaching, meeting, or exceeding the torque target (audible, LED, LCD, and vibratory) * Six pre-programmed languages, including English, Spanish and French * Certificate of tool calibration is valid for 12 months from the date of first use * REDLITHIUM batteries (not included with bare tool) deliver more work per charge and more work over the life of the battery

Not Yet Reviewed

$849.00

Milwaukee M12 FUEL 3/8 in. Digital Torque Wrenches with ONE-KEY

Milwaukee M12 FUEL 3/8 in. digital torque wrenches with ONE-KEY are the industry's first torque wrenches with a motor, delivering increased productivity, precise torque accuracy, and user-demanded reporting functionality. They deliver 50 percent faster installation times versus the hand tool or 2-tool installation process while providing more control to reduce the over-torquing of fasteners. These battery-powered torque wrenches also feature ONE-KEY, giving you the power to track, report, and manage your tool. They record all of the fasteners, saving and producing a downloadable report for anyone requiring the data. Wirelessly connect to a smartphone to customize the tool settings, track the location, manage inventory, and lock the tools out for added security and protection for your investment. Milwaukee M12 FUEL digital torque wrenches with ONE-KEY features: * 10-100 lb.-ft. of torque * Accurate within 2 percent for torque-critical fasteners * Carrying case * Calibration certificate * Compatible with REDLITHIUM battery pack * REDLINK PLUS intelligence system * POWERSTATE brushless motor * Adjustable run-down torque * Four measurement modes: ft./lb., in.-lbs., Nm, and Kg-cm * Durable design * LED lights, LCD screen, sound, and handle vibration notifications for reaching, meeting, or exceeding torque target * Six pre-programmed languages including English, Spanish, and French

Not Yet Reviewed

$899.00

OTC Bearing Race and Seal Driver Sets

OTC proper size drivers are perfect for the removal of seals, bearings, or any bushing installation jobs. These aluminum constructed sets permit the installation of tapered bearing races and seals without damaging the component or housing. The tapered side of the driver is used to install races; invert the driver to the flat side to install seals. These OTC sets are housed in a blow-molded plastic storage case.

4.75 out of 5 stars ( 8 )

$848.99

Clearance

Sunex Tools Impact Sockets

Sunex Tools impact sockets are machined from chromoly steel with a protective black finish for long life and dependability. Socket options include: standard or metric; drive size; deep well socket type and sizes; short well socket type and sizes. Some sets also contain extensions. Sunex impact sockets are available individually—or in various sets with a heavy-duty, blow-molded storage case.

4.81 out of 5 stars ( 85 )

$762.99

Nes External Thread Repair Tool Sets

Nes external thread repair tool sets have an ingenious design that allows you to clean up damaged or rusty threads with just one tool. "Universal" is the key word here. One tool repairs SAE, Metric, coarse, fine, left or right handed threads. These external thread repair tools will allow you clean-up or repair your external pipe threads. No calibration is necessary and its self-adjusting design replaces huge array of dies to keep money in your pocket and your toolbox free of clutter. Nes external thread repair tools will repair thread on pipes as small as 5/32 in. up to 6 in.

Not Yet Reviewed

$794.99

OTC Accutorq Clikker Torque Wrenches

These OTC Accutorq precision torque wrenches make a loud click when you've reached the desired torque setting. These OTC wrenches feature ratcheting heads, all metal construction, permanently roll marked scales, and soft grip rubber handles enables you firmly grasp the wrench.

4.0 out of 5 stars ( 1 )

$762.99

Klein Tools Heavy-Duty Ratcheting Cable Cutters

Klein Tools heavy-duty ratcheting cable cutters provide maximum leverage with minimum effort. Forged, heat-treated, shear-type blades cut steel and ACSR. Long steel handles have heavy vinyl grips for comfort and slip-resistance. A blade-advance knob quickly rotates the blade to engage the cable or other material being cut. Their quick-release mechanism allows for removal of the cable or rod before completion of the cut, if desired. (Not designed for cutting EHS Guy Strand or reinforcement rod.)

Not Yet Reviewed

$996.45

Klein Tools Chicago Grips

Klein Tools Chicago grips are designed for extra-high-strength cables, messenger, guy strand and conductors. Klein grips are manufactured from custom drop-forged steel that is machined and heat-treated for excellent durability. Each style and size grip is individually hand-inspected, and actuated for proper function. These premier wire-pulling tools are rigorously tested and pulled to rated load, ensuring the highest quality and reliability. When your project involves working with wiring and cables use Klein Chicago grips--they're the proper tools to get the job done right!

Not Yet Reviewed

$984.40

—

$996.06

Klein Tools 1000V Insulated Tool Kit with Hard Case

Klein's 1000V utility insulated tool kit with hard case features 13 of the essential tools a Lineman needs. The custom case includes two pallets with pockets custom-fit for each tool, a piano-hinged case cover that has both a combination lock and two key-locked latches for security—plus extra storage space behind the pallets for important papers or other accessories. Two layers of insulation provide protection against electric shock. This kit meets or exceeds IEC 60900: 2012, ASTM F1505-10 standards for insulated tools

Not Yet Reviewed

$869.99

John Dow Preset Electronic Oil Meter Guns

John Dow preset electronic oil meter guns are designed to accurately measure the amount of dispensed fluid. They prominently feature an easy-to-read LCD display with up to five independent preset quantities. These meters measure in pints, quarts, gallons, and liters. The replacement guns include a rigid spout with an automatic tip that rotates 90 degrees. Take the guesswork out of dispensing the proper amount of viscous fluid with a John Dow preset electronic oil meter gun.

Not Yet Reviewed

$775.99

Yukon Gear & Axle Differential Housing Spreader Tools

Yukon Gear & Axle differential housing spreader tools are built to work on the Dana 30, 44, 60, 61, 70, and 80 differentials. They are designed to allow you to safely and easily set carrier bearing preload, saving time and money. The tools are made from quality materials and feature full adjustability for simple installation and use.

Not Yet Reviewed

$756.99