Availability
On Sale
Introducing the Garmin Catalyst—an industry-first racing coach and driving performance optimizer that's changing the world of motorsports! It mounts in the cockpit, gathering performance data and providing real-time audible coaching. Immediate session analysis helps drivers of all levels achieve their full track driving potential. The Groundbreaking True Track Positioning technology uses built-in sensors and 10 Hz multi-GNSS positioning to automatically generate your car's racing line on the track. In addition, the revolutionary True Optimal Lap technology shows your best achievable time, based on lines you actually drove and can repeat. While on the track, drivers hear real-time coaching cues through a compatible Bluetooth-enabled headset or car stereo (headset sold separately). After your session, simply use the touchscreen display to immediately review your performance data and see your major areas for improvement. Garmin Catalyst is not intended for public roadway use. Other key product features: * Automatically interprets your data to show biggest areas of gain right on the 7 in. Catalyst (backlit) display, no computer needed * Securely position Catalyst inside the cockpit using the included heavy-duty suction cup or screw-down mount * Easily compare your performance data from other sessions, and get immediate, adaptive suggestions * Shows best lap time, adaptive delta time, number of laps and session time * Preloaded track database includes road courses from around the world * Review in-depth performance data on your Garmin Catalyst device, or access a summary of your data on your mobile device or computer using Garmin Connect
( 5 )
$999.99
$899.99
On Sale
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 27 )
$899.99
$809.99
For a difference you can hear and feel, Ford Performance Parts 2015-17 Mustang GT Power Pack 2 performance packages should be at the top of your list. Featuring Ford proprietary software and engineering, with calibrations available for manual and automatic transmissions, these kits allow gear ratio changes up to 4.09:1. Additional features: * GT350 cold air intake * 87mm throttle body with exclusive intake adapter * Open air filter with industry exclusive 50-state legal CARB E.O. * 21 hp and 24 lbs.-ft. peak gains over stock * 40 lbs.-ft. gain at 1500 rpm * Automatic calibrations feature optimized performance shift schedule * Exclusive no-lift shift strategy and enhanced throttle response * 91 octane or higher fuel required
( 28 )
$801.99
The Ford Performance calibration for 2019-20 Ranger Ecoboost is a 50-state legal calibration that increases power and improves driveability throughout the RPM range. This kit is Ford Performance-engineered and dyno-tested and improves driveability and throttle response throughout RPM range and features an optimized shift schedule. You can expect a horsepower gain of 45 hp @ 4,500 rpm and torque gain of 60 lbs.-ft. @ 2,500 rpm. USA and Canadian vehicles come with a Ford Performance 3-year or 36,000 mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician. Tire size configurable up to 265/70/17, as recommended with the M-18000-R Ranger Off-Road Suspension Leveling Kit. This calibration is only compatible with premium fuel. Power Pack also includes: * Ford Performance Pro Cal 4 calibration delivery tool M-12655-F * Ford Performance high-flow K&N air filter
( 4 )
$772.99
On Sale
Painless Performance 22-circuit direct fit 1965-66 Mustang chassis harness have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature auxiliary circuits with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 12 )
$896.99
$807.29
On Sale
Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems
( 10 )
$1,014.99
$913.49
COBB Tuning Ford Stage 1 Plus power packages bundle the most flexible engine management solution with more clean, cold air to boost your vehicle's power and performance. Ford Stage 1 kits feature Accessport V3 that unlocks your vehicle's potential by replacing conservative factory settings with aggressive calibrations. To that COBB adds one of their cold air intakes (some are carbon fiber) with reusable, high-flow air filters to increase airflow. Finally, most of the Ford Stage 1 Plus power packages (Mustang Ecoboost not included) are completed with machined aluminum rear motor mounts to improve the traction of all that new found power. Upgrade your Ford Focus, Fiesta, or Mustang with COBB Tuning Stage 1 Plus power packages.
Not Yet Reviewed
$970.00
COBB Tuning Mazda Stage 1 Plus power packages deliver simple, bolt-on tuning solutions with clean, cool air for your engine to breathe, resulting in increased performance. Plus, you can upgrade your Mazdaspeed3 fuel pump internals to keep your fuel supply happy, and add rear motor mounts for increased traction of your newfound power. Packages are available for Mazdaspeed6, too. Order the kit designed for your vehicle application. Additional product features: * Accessport V3 includes OTS maps to make tuning quick and easy * SF air intake system—minimizes turbulence, while maintaining optimal flow * Air box—16-gauge aluminum with wrinkle black powdercoat * Autotech fuel pump internals * Turbo inlet hose—4-ply steel reinforced silicone * Billet aluminum rear motor mount * Mazdaspeed6 Stage 1 Plus packages only include Accessport V3 and SF intake system
Not Yet Reviewed
$915.00
COBB Tuning Mitsubishi Stage 1 Plus power packages modify Evo X rides for increased performance, power, and response. These Plus kits begin with Accessport V3 that will replace conservative factory settings with more aggressive calibrations. And they allow you to upgrade forever with off-the-shelf calibrations for most bolt-on modifications. To that, COBB adds their one-piece composite SF intake system to save weight and reduce heat transfer. It's fitted with a custom conical cloth air filter element and a CFD-designed velocity stack to maintain optimal flow. COBB Tuning Mitsubishi Stage 1 Plus power packages are completed with their Evo X SF air box that will protect the intake from turbulence caused by the radiator fans, as well as heat radiating from the engine.
Not Yet Reviewed
$960.00
COBB Tuning Subaru Stage 1 power packages combine an amazing tuning solution with increased airflow for more power and improved overall drivability. The Stage 1 provides you with COBB Accessport V3, the most flexible ECU upgrade solution available, that permits you to easily change maps with the push of a button. And along with that you receive a high-flow filter made with washable/reusable woven cotton media that allows increased airflow with maximum filtration. COBB Tuning Subaru Stage 1 power packages are the perfect foundations, with the best bang for your buck, to begin modifying your car.
( 1 )
$765.00
COBB Tuning Ford Stage 1 power packages unlock the power hidden within your vehicle, and put you on the path to power modifications, with the best bang for your buck. Stage 1 kits combine their most flexible ECU upgrade solution, Accessport V3, with a high-flow filter that increases airflow. COBB also includes in some packages a rear motor mount to improve traction. Additional information: * Accessport V3 allows you to replace conservative factory settings with more aggressive calibrations * COBB high-flow filter uses washable/reusable woven cotton media with metal mesh and precision-molded rubber base * Machined 6061 billet aluminum rear motor mount with zinc hardware (not included with all kits)
Not Yet Reviewed
$805.00
—
$810.00
COBB Tuning Volkswagen Stage 1 power packages provide the first step to unlocking the potential hidden inside your GTI and Golf R. You will receive the amazing Accessport V3 that allows you to upgrade factory settings with more aggressive calibrations, and as your bolt-on mods increase, you'll be able to continue upgrading with its off-the-shelf calibrations. Paired with your ECU upgrade solution is a COBB high-flow filter designed to minimize restrictions and maximize filtration. The filter utilizes woven cotton and metal mesh with a precision molded rubber base to ensure only the cleanest air passes to your engine. Increase the efficiency and power of your Volkswagen with a COBB Tuning Stage 1 package.
Not Yet Reviewed
$770.00
—
$800.00
COBB Tuning Mazda Stage 1 power packages are effortless bolt-on tuning solutions that produce power and torque increases, along with improved traction and reduced wheel hop. Mazda Stage 1 kits feature Accessport V3--COBB's comprehensive tuning solution that allows you to replace conservative factory settings with more aggressive calibrations, unlocking the hidden power within your vehicle. Bundled with the V3 is a high-flow, pre-oiled, washable air filter and machined 6061 billet aluminum, laser-etched rear motor mount to aid in getting your new-found power to the ground. Whether Gen 1 or Gen 2 Mazdaspeed, COBB Tuning Stage 1 power packages will give your car a boost in the right direction!
Not Yet Reviewed
$885.00
On Sale
Painless Performance 23-Circuit chassis harnesses are the most comprehensive wiring harness available for your 1966-1977 Ford Bronco. Utilizing input from the early Bronco community and after months of research and development this new precedent in Bronco wiring has emerged. Features include: * Ford color coded wiring to match factory schematics * Full weatherproof design * Composite glove box for mounting the main 20 circuit weatherproof fuse block * 9 accessory wires pre-wired on individual circuits in the fuse block allow each harness to be custom tailored to each vehicle * 2 fused fuse blocks, a turn flasher and hazard flasher, and horn relay * Full color 80 plus page instruction manual * Full lifetime warranty
( 1 )
$894.99
$805.49
On Sale
Painless Performance 22-circuit 1969-70 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories, such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 6 )
$863.99
$777.59
On Sale
Painless Performance 26-circuit 1970-73 direct-fit Camaro harnesses have virtually every connector installed on the harness out of the box. They are split into three sections (engine, interior, and rear) and feature a fully integrated ground circuit. You'll find many upgrades, such as a 6-gauge charge wire and a 150 amp midi fuse. Each kit includes a 150+ page full color step-by-step manual that also covers many alternative wiring options. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers
( 7 )
$915.99
$824.39
On Sale
Painless Performance 26-circuit 1969 direct-fit Camaro harnesses are complete for a trouble-free, headache-free install. True to their name, Painless delivers these kits with virtually every connector installed on the harness out of the box. They cover all common options, plus a fully integrated ground circuit. Included are provisions for the RS headlights and taillights, cowl hood, and even a complete console harness! The 26-circuit 1969 Camaro harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * 120+ page manual full of color schematics, photos, and step-by-step instructions
( 11 )
$1,069.99
$962.99
On Sale
Painless Performance 26-circuit 1969 direct-fit Chevelle harnesses deliver everything you need, plus more! These kits offer provisions for connecting standard factory components, as well as what you'll need for aftermarket components. This includes options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. The 26-circuit harnesses follow all of the same routing found on the factory harnesses, which allows you to utilize the factory attachment points—and extra length has been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. True to their name, Painless Performance supplies what you need for a trouble-free, headache-free wiring job. The 26-circuit 1969 Chevelle harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * Fully integrated ground circuit * 120+ page manual full of color schematics, photos, and step-by-step instructions
( 7 )
$961.99
$865.79
On Sale
Painless Performance 26-circuit direct-fit 1974-77 Camaro harnesses have virtually every connector installed on the harness out of the box. They are split into three sections (engine, interior, and rear) and feature a fully integrated ground circuit. You'll find many upgrades in these harnesses such as a 6-gauge charge wire and a 150 amp midi fuse. Each kit includes a 150+ page full color step by step manual that also covers many alternative wiring options. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers
( 3 )
$939.99
$845.99
On Sale
Painless Performance 26-circuit 1978-81 direct-fit Camaro harnesses have virtually every connector installed on the harness out of the box. They are split into three sections (engine, interior, and rear) and feature a fully integrated ground circuit. You'll find many upgrades in these harnesses such as a 6-gauge charge wire and a 150 amp midi fuse. Each kit includes a 150+ page full color step-by-step manual that also covers many alternative wiring options. Each wire is custom printed with the circuit identification, as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers
( 11 )
$988.99
$890.09
Upgrade your 2021-2023 Ford F-150's 3.5L EcoBoost engine's capability with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 F-150 with 3.5L engine (non-Raptor models) * Improved throttle response throughout the rpm range * Peak power = 450 hp @ 5,250 rpm, +55 hp @ 5,250 rpm * Peak torque = 510 lbs.-ft. @ 3,500 rpm, +100 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: Does not fit 3.5L Powerboost Hybrid engines. Not applicable to Raptor models. Not for use in F-150 Lightning. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions please contact Tech Line.
Not Yet Reviewed
$792.99
On Sale
Painless Performance GM Gen IV Vortec truck engine wiring harnesses are designed to operate any Chevrolet Gen IV engine coupled with a 4L65E, 4L70E, 4L80E, or 4L85E automatic transmission. They cannot be used with a 4L60E transmission because it's missing the input speed sensor required by the transmission control module. The harnesses support engines with or without cylinder deactivation and/or variable valve timing. They feature an integrated weatherproof fuse block. Painless Performance GM Gen IV Vortec truck engine wiring harnesses have 10 fused power circuits, including injectors, ignition coils, oxygen sensors, ECM ignition, MAF/VLOM, and fuel pump. They also use an integrated 30 amp fuel pump, 40 amp cooling fan relays, and two ignition relays. The harnesses have an extra 4 ft. of length between the ECM connections and the main engine breakout.
( 1 )
$840.99
$756.89
Enhance the performance of your 2.7L engine in your late-model Bronco! The Ford Performance engineered and dyno-tested calibration delivers their promise of more power and increased performance without sacrificing reliability. Product details: * Improved throttle response throughout RPM range * Optimized shift schedule * Peak torque = 433 lbs.-ft. at 3,500 rpm * Peak power = 355 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). Additional modifications required. * Ability to change axle ratio/FDU up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * Not available in California for 2022-23 model year vehicles * M-12655-F ProCal 4 delivery tool included * The M-9603-B23 calibration is also available * Premium fuel required NOTES: *Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. * Calibration and ProCal 4 tool are VIN locked. * ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode." * ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
( 1 )
$754.99
Level up your Ford Ranger Raptor 3.0L EcoBoost engine's performance with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2024 Bronco Raptor (2025 available for non-California vehicles) * Improved throttle response throughout the rpm range * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
( 1 )
$876.99
Modal Header