Availability
Showing In Stock Items. Show All 14 Items.
The Ford Performance calibration for 2019-20 Ranger Ecoboost is a 50-state legal calibration that increases power and improves driveability throughout the RPM range. This kit is Ford Performance-engineered and dyno-tested and improves driveability and throttle response throughout RPM range and features an optimized shift schedule. You can expect a horsepower gain of 45 hp @ 4,500 rpm and torque gain of 60 lbs.-ft. @ 2,500 rpm. USA and Canadian vehicles come with a Ford Performance 3-year or 36,000 mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician. Tire size configurable up to 265/70/17, as recommended with the M-18000-R Ranger Off-Road Suspension Leveling Kit. This calibration is only compatible with premium fuel. Power Pack also includes: * Ford Performance Pro Cal 4 calibration delivery tool M-12655-F * Ford Performance high-flow K&N air filter
( 4 )
$772.99
For a difference you can hear and feel, Ford Performance Parts 2015-17 Mustang GT Power Pack 2 performance packages should be at the top of your list. Featuring Ford proprietary software and engineering, with calibrations available for manual and automatic transmissions, these kits allow gear ratio changes up to 4.09:1. Additional features: * GT350 cold air intake * 87mm throttle body with exclusive intake adapter * Open air filter with industry exclusive 50-state legal CARB E.O. * 21 hp and 24 lbs.-ft. peak gains over stock * 40 lbs.-ft. gain at 1500 rpm * Automatic calibrations feature optimized performance shift schedule * Exclusive no-lift shift strategy and enhanced throttle response * 91 octane or higher fuel required
( 28 )
$801.99
AiM Sports sixth generation lap timer, MyChron6 2T, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 2T lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, a long lasting battery, and manages two temperature sensors. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * Two temperature inputs * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software
Not Yet Reviewed
$759.00
On Sale
Edge Products' Juice modules with Attitude CTS3 programmers are the ultimate tuner for the average diesel owner and horsepower junkies too! Featuring state-of-the-art CTS3 technology, the Juice with Attitude offers a whole new realm of features to continue pushing the limits of on-the-fly power, control, and monitoring. This in-cabin controller not only monitors vital vehicle parameters but allows you to shift-on-the-fly by controlling the Juice module for maximum control and power gains. If you own a diesel truck and you're looking for complete control over your driving experience, look no further than Juice with Attitude CTS3 programmers. Additional product attributes: * Slim, sleek case with state-of-the-art swipe technology * 5 in. full color, high-resolution touchscreen with the latest swipe technology (with one-touch easy menu navigation) * Light sensitivity meter to dim screen as ambient light decreases * HDMI style plug for power and linking EAS accessories * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge layouts, including on-the-fly power level adjustment on screen * Wi-Fi updates and notification center * Multiple power levels for mileage, towing, daily driving, performance, and extreme power curves * Additional Hot Unlock available for some applications for an additional power level * Up to 180 hp and 400 torque gains, depending on application * Dynamic built-in safety features like EGT backdown, cold engine protection, transmission slip backdown and more Note: Some features may vary by make/model/year. Configure your vehicle to search for parts and features specifically for your application.
Not Yet Reviewed
$1,299.95
$999.95
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$869.99
Upgrade your 2021-2023 Ford F-150's 3.5L EcoBoost engine's capability with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 F-150 with 3.5L engine (non-Raptor models) * Improved throttle response throughout the rpm range * Peak power = 450 hp @ 5,250 rpm, +55 hp @ 5,250 rpm * Peak torque = 510 lbs.-ft. @ 3,500 rpm, +100 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: Does not fit 3.5L Powerboost Hybrid engines. Not applicable to Raptor models. Not for use in F-150 Lightning. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions please contact Tech Line.
Not Yet Reviewed
$792.99
Level up your Ford Ranger Raptor 3.0L EcoBoost engine's performance with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2024 Bronco Raptor (2025 available for non-California vehicles) * Improved throttle response throughout the rpm range * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
( 1 )
$876.99
Enhance your 3.5L EcoBoost engine's performance in your F-150 Raptor with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 Raptor F-150 equipped with 3.5L engine only * Peak power = 466 hp @ 5,500 rpm, +26 hp @ 3,250 rpm * Peak torque = 554 lbs.-ft. @ 3,250 rpm, +54 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: For Raptor F-150 equipped with 3.5L engine only. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$824.99
The six-position Edge Revolver for Ford 7.3L Power Stroke diesels can now be controlled by the Insight CTS3 programmer! Change the power levels of your chip using the touch screen on the Insight CTS3. The new combo kits will include the Revolver chip, Insight CTS3, and the EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable performance, up to 140 hp, using Edge's Insight CTS3 display. With the EAS Revolver Cable installed, the Insight CTS3 will recognize the EAS switch, allowing you to view the new power level screen with the Up/Down adjustment buttons and display what power level you're in. This new screen allows switching between multiple power levels on-the-fly as easy as one-touch! Order the model recommended for your application. Edge Revolver with Insight CTS3 Programmer features: * Most comprehensive, state-of-the-art, multi-gauge touch screen display on the market * Plug-in performance chip to operate with your specific 7.3L box code * Shift-on-the-fly power levels with the Insight CTS3 * Full in-cab, state-of-the-art digital gauges * Up to six options for performance and other various modes * Calibrations for your specific year, make, model, and transmission * Up to 140 hp and 250 lbs.-ft. torque * Increase fuel economy, towing power, and overall performance * Built-in performance meter measures 0-60, 1/4 mile times, etc. * Clear and Read DTC codes * Easy installation
Not Yet Reviewed
$829.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
