Availability
March Performance Ultra Style serpentine systems are designed to convert your standard V-belt pulleys to a single ribbed serpentine belt. The kits are available for Mopar, Chevy, Ford, Oldsmobile, Pontiac, and Buick engines—so they are likely to have your application covered. These systems include billet aluminum pulleys that are clear powdercoated, along with the correct brackets and mounting hardware. March Performance Ultra Style serpentine systems are available with or without power steering to suit your specific vehicle.
( 11 )
$779.99
—
$962.99
Allstar Performance LS timing cover conversion kits adapt a standard small block Ford distributor into CT525 crate and LS Series engines, allowing timing adjustment and ability to change mechanical advance curve. This also provides an alternative to installing complete computer and fuel injection systems when swapping a late model LS engine into an older street performance vehicle. Enjoy the performance and durability of the GM LS Series engine with the simplicity and tune-ability of a distributor and carburetor. The Allstar kits include all internal components and new timing cover for converting LS Series engines to utilize a standard distributor ignition system and a carburetor with a belt-driven or electric fuel pump.
( 1 )
$799.99
March Performance small block Chevy Ultra serpentine conversion kits will make it easy to convert your old V-belt pulleys. They bolt to the front of any 1969 or later small block Chevy heads and are precision CNC-machined from solid billet 6061 T-6 aluminum to fit perfectly and handle high-torque and vibration. The included bracket kits come complete with stainless steel tensioning rods and chromoly rod ends for high performance operation. Required mounting hardware is included and is powdercoated to eliminate polishing in those hard-to-reach places. Matching serpentine pulleys are precision CNC-machined from 6061 T-6 aluminum. These pulleys will not fracture like common cast pulleys because they are hard coated in the high-wear areas on their high water flow ratio pulleys. The street rod ratio increases water flow and fan speed. This helps at critical low-speed driving.
Not Yet Reviewed
$832.99
—
$923.99
Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.
( 141 )
$757.95
The primary purpose of S&S Cycle's 750cc big bore kits is to enhance the performance of smaller engine models, particularly for the Street 500 or Street 750, giving them more power and acceleration. These stock bore cylinder kits are designed to increase the engine displacement by enlarging the cylinder bore, resulting in more power and torque compared to the stock engine, typically by converting a smaller displacement engine like a 500cc or 650cc into a 750cc unit. Many big bore kits are designed to be "bolt-on" upgrades, meaning they can be installed without requiring extensive engine modifications or machining, making them relatively easy to add to a motorcycle. Before ordering, make sure this kit is compatible with your specific street bike model.
Not Yet Reviewed
$869.95
Combining all of the components you need to upgrade your oiling system, Feuling Parts HP+ oiling system kits come with their 6061 billet aluminum high-volume oil pump and their high-flow 7075 billet cam plate for well-matched oil flow increase. They have hydraulic roller lifters, gaskets, and O-rings to ensure fresh quality seals, along with greater engine stability at high rpm. Their HP+ oil pumps improve street and track performance and are constructed out of 6061 aluminum, resulting in remarkably strong and efficient oil pumps. These well-engineered pumps can produce 40 percent more pressure than your stock pump, and are capable of 60 percent more return volume, to reduce or eliminate blowby and wet sumping. All of these functional improvements add up to a more efficient motor, with cooler temperatures and more hp and torque to the rear wheel. They're available for various models and engine types--find the best fit for your application and get your ride running well-lubricated for that next road trip.
Not Yet Reviewed
$813.95
—
$861.95
S&S Cycle TC3 oil pump and cam plate kits are designed to deliver increased oil pressure and return scavenge volumes over your factory oil pump while providing increased rigidity and a pressure relief valve. The TC3 oil pump features three stages for consistent oil pressure, plus reliable scavenging, and the TC3 cam plate includes removable passage plugs for easy service. S&S Cycle TC3 oil pump and cam plate kit features include: * Precision CNC-machined forged aluminum * Adjustable oil pressure regulator adjusts without removing the plate from engine * Screens and magnetic traps help protect the scavenge rotors from debris * Special design allows S&S pumps to tolerate more pinion shaft runout without damage
Not Yet Reviewed
$836.95
S&S Cycle Early Twin Cam Easy Start gear drive camshaft kits offer more performance for less money, and more time to enjoy riding. The Easy Start kits allow your stock starter to start any engine and most can be used with stock valve springs. Plus, they are designed to greatly improve valve timing accuracy by eliminating timing chain lash. Twin Cam kits include cams with inner gears and installation kits. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Early Twin Cam Easy Start gear drive camshaft kits.
Not Yet Reviewed
$995.95
—
$1,070.95
Step up the performance of your Twin Cam with affordable S&S Cycle Early Twin cam gear drive camshaft kits. Some kits allow you to use stock springs, and the complete kits include a gear drive camshaft set and inner gears, an outer cam drive gear kit, and a camshaft installation kit. Performance doesn't have to leave you with empty pockets. S&S Cycle Early Twin Cam gear drive camshaft kits can save you time and money, while providing the added power that you want.
Not Yet Reviewed
$948.95
Upgrade your cam chain system with Feuling Parts conversion HP+ oiling system kits. They take your 1999-2006 camshafts and upgrade the chain system to use the late style 2007-12 hydraulic tensioner system. Combining all of the components you need to upgrade your oiling system, the included HP+ oiling system kits come with their 6061 billet aluminum high-volume oil pump and their high-flow billet cam plate for well-matched oil flow increase. They have hydraulic roller lifters, gaskets, and O-rings to ensure fresh quality seals, along with greater engine stability at high rpm. Their HP+ oil pumps improve street and track performance and are constructed out of 6061 aluminum, resulting in remarkably strong and efficient oil pumps. These well-engineered pumps can produce 40 percent more pressure than your stock pump, and are capable of 60 percent more return volume, to reduce or eliminate blowby and wet sumping. All of these functional improvements add up to a more efficient motor with cooler temperatures, and more hp and torque to the rear wheel. They're available for various models and engine types--find the best fit for your application and get your ride running well-lubricated for that next road trip.
Not Yet Reviewed
$861.95
On top of being constructed from superior materials, S&S Cycle's Evolution cylinders have thicker castings, larger cooling fins, and better wear resistance than stock cylinders. The design, finish and workmanship of these replacements corresponds to the stock counterparts that they replace. The cylinders feature ductile cast-iron sleeves in aluminum castings and are available in natural or black powdercoat finish to match OEM components. Individual cylinders and cylinder sets without pistons are bored slightly under size and are not honed, so they may be finish-honed to fit your pistons. Select the cylinders designed to fit your specific Harley-Davidson® model.
Not Yet Reviewed
$815.95
—
$877.95
S&S Cycle Hot Set-Up Twin Cam cylinders are handsomely designed to house your pistons. They are crafted from aluminum, available in a silver, stone gray, or machined wrinkle black finish, and have a stock bolt pattern. Select the Hot Set-Up cylinders designed for your Big Twin engine. Please note: Individual cylinders and cylinder sets without pistons are bored slightly under normal size and are not honed.
Not Yet Reviewed
$897.95
—
$1,058.95
Step up the performance of your Twin Cam with affordable S&S Cycle gear drive camshaft kits. Some kits allow you to use stock springs, and the complete kits include a gear drive camshaft set and inner gears, an outer cam drive gear kit, and a camshaft installation kit. Performance doesn't have to leave you with empty pockets. S&S Cycle Late Twin Cam gear drive camshaft kits can save you time and money, while providing the added power that you want.
Not Yet Reviewed
$907.95
—
$948.95
S&S Cycle Late Twin Cam Easy Start gear drive camshaft kits offer more performance for less money and more time to enjoy riding. S&S Easy Start camshaft kits allow stock starter to start any engine and most can be used with stock valve springs. Plus, they are designed to greatly improve valve timing accuracy by eliminating timing chain lash. Twin Cam kits include cams with inner gears and installation kit. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Late Twin Cam Easy Start gear drive camshaft kits.
Not Yet Reviewed
$1,070.95
Boost your engine's performance with S&S Cycle's Twin Cam cylinders. The design, finish and workmanship of these cylinder replacements feature many improvements over stock units, including sturdier walls that are far less prone to warpage. Straighter, sturdier walls equals a better seal, and fit for pistons, and piston rings. An improved machining process also ensures a better surface for both the head and base gaskets. These cylinders feature ductile cast-iron sleeves in aluminum castings and are offered in black wrinkle finish. Select the cylinders designed to fit your specific HD® model.
Not Yet Reviewed
$897.95
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 70 )
$999.99
Howards Cams Rattler camshaft and lifter kits are designed for maximum performance. Utilizing the highest grade race quality cores available, the Rattlers are 100 percent Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. They're manufactured on dedicated high-precision CNC cam grinding machines, and the hydraulic lifters offer precision oil control. Howards Cams Rattler camshaft and lifter kits are ideal OE replacements, as well as for use in high performance racing applications.
( 25 )
$999.99
Summit Racing™ Pro SBC LS firing order hydraulic roller retrofit cams are available in seven stages--from a small smooth idle cam capable of towing, to a big duration stomper that's ready to go bracket racing. Utilizing the LS firing order on a traditional small block Chevy improves the engine in several ways, including exhaust sound and harmonic improvements. These kits include a premium camshaft and drop-in link bar style hydraulic roller lifters. Best of all: these Pro SBC LS firing order hydraulic roller retrofit cams are precision-ground in the USA on USA billets! Order the cam recommended or your application.
( 2 )
$915.51
COMP Cams Thumpr NSR modular 3-valve camshafts for Ford 4.6L/5.4L engines deliver an aggressive "thumping" exhaust idle and generous power gains in the middle and upper rpm range. They will turn your Ford 3-valve engine into a performance machine with a minimum of installation difficulty; they only require the addition of COMP Cams cam phaser limiter kits and computer tuning. These cam phaser limiter kits safely modify the factory variable cam timing (VCT) system, allowing for the use of aggressive camshaft lobe technology without sacrificing the benefits of the VCT. Choose between three unique cam designs—Thumpr, Mutha' Thumpr, and Big Mutha' Thumpr. Each delivers excellent horsepower gains and broad torque curves for your musclecar.
( 3 )
$971.95
Eagle forged 4340 steel crankshafts are great for high performance applications. They feature non-twist forging, undergo a multi-stage heat-treatment process, and are stress-relieved and shot-peened. These cranks are X-rayed, magnafluxed, and sonic-tested, so you know you're getting a top-quality piece. Each crankshaft has chamfered oil holes for improved oiling, a .125 in. radius on rod and main journals for increased strength, and the journals are precision-ground and micro-polished to less than 5 R.A. A target bob weight of +/- 2 percent greatly reduces balancing time. Many options are available; order the model recommended for your year/make and engine application.
( 53 )
$796.99
—
$852.99
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$947.95
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$773.95
COMP Cams Nitrous HP cam and lifter kits are designed to work with your nitrous system to get more power from your engine. The unique intake cam lobes allow your engine cylinders to fill better for more complete combustion. While, the exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 5 )
$816.95
COMP Cams Xtreme fuel injection cam and lifter kits are designed for late model applications, muscle, sports cars, trucks, and more. Ground using faster-opening and more efficient ramp profiles, the kits include a matched set of COMP Cams High Energy lifters to maximize efficiency. If you're working with fuel injection, get the most power out of your engine with COMP Cams Xtreme fuel injection cam and lifter kits. Order the model tailored for your vehicle and engine specs.
( 8 )
$816.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
