Availability
Showing In Stock Items. Show All 112 Items.
Many of the late model blocks have taller lifter bores, which means standard seat height lifters with an offset require manual notching of the lifter bore for pushrod clearance. Crower developed a lifter with a +.300 in. higher pushrod seat to solve this problem. Crower Dart block raised seat roller lifters are taller to clear lifter bore and have lightweight billet alloy bodies paired with a robust stainless steel alignment blade. They feature High-Pressure Pin Oiling (HIPPO), allowing more oil to be delivered to critical high-load areas for greatly improved cycle life.
( 1 )
$1,090.99
COMP Cams short travel XD hydraulic roller lifters offer the advantages of both light pre-load and reduced oil volume, producing the most stable and highest-revving hydraulic lifter available. The XD versions feature heavy-duty tool steel pushrod seats. This adds strength and durability in extreme-duty applications, such as turbo drag cars and offshore powerboats. Certain engines respond better to a light lifter pre-load because it recovers more quickly from any bad harmonics in the valvetrain. Others work better with a heavy pre-load because oil volume is reduced under the plunger, which increases lifter stiffness. Now you have the best of both—with COMP Cams short travel XD hydraulic roller lifters. Order the model designed for your vehicle and engine application.
( 3 )
$969.95
—
$1,023.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 241 )
$823.95
—
$1,029.03
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$876.95
—
$941.95
COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.
( 8 )
$813.95
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$833.95
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$974.95
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
$921.38
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 164 )
$780.50
—
$1,119.50
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 21 )
$849.99
—
$874.99
Briggs & Stratton 206 racing crate engines are factory-sealed long blocks with ground cams and controlled piston pop-up (reducing compression variance). These budget-friendly mills feature a simplified IKF/WKA rule set designed to maintain a stock configuration, right down to the factory-shipped carburetor jets. Simply put: the 206 engines even the playing field so that drivers can focus on the important task at hand--winning the race! Briggs & Stratton 206 crate engine features and specs: * Primary use: Karting, Microstocks, Jr. Drag Racing * Engines are assembled by hand in Milwaukee, WI using tooling and dies specifically designed for racing for unparalleled repeatability * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear * Cam ground, barrel-faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * .255 max. lift ground cam with nitrited lobes and built-in mechanical compression release * High-silicon, racing-engineered valve springs * High-grade stainless steel dished valves with nitrited exhaust * 3-piece, automotive-style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built-in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom grafoil composition head gasket
( 7 )
$759.00
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,087.50
$870.00
—
$1,106.50
Chevrolet Performance L92 cylinder heads are production-style aluminum heads that provide great airflow and exceptional performance. Features include: * Manufactured from 319-T5 aluminum alloy * Aluminum performance head * Fits any LS family engine with 4.000 in. bore or larger * Solid stem intake and exhaust valves * .510 in. Max Lift valve springs * As-cast L92-style intake ports * D-shaped exhaust ports * As-cast combustion chambers * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle * Bolt-down-type rocker arms * Center-bolt valve cover hold-downs
Not Yet Reviewed
$999.99
Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.
( 9 )
$1,099.99
Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads deliver great throttle response and power from 1,500 to 6,500 rpm, and with winning results. Offering the best in quality and performance, these bare heads are cast and heat-treated in the Edelbrock Foundry and machined in their manufacturing facility. Designed with the latest computer technology, they have highly efficient ports and state-of-the-art combustion chambers shapes for improved performance throughout the rpm range with great throttle response and top-end horsepower. Edelbrock Performer RPM bare NHRA Stock/Super Stock cylinder heads include top-quality features, like threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats.
( 1 )
$782.50
—
$1,041.50
These Edelbrock Victor Max Wedge big block Chrysler cylinder heads are designed for the serious race enthusiast. They are made of aluminum and feature raised intake and exhaust ports for improved flow characteristics. The raised valve cover rails eliminate any chance of leaking gaskets. Available with or without valves, the Edelbrock Victor Max Wedge big block Chrysler cylinder heads have reamed and semi-finished valve stem guides and no valve job. They require final guide sizing, valve seat finishing before installation, and special offset rocker arms for the intake side.
( 2 )
$1,041.50
COMP Cams Thumpr LS camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. Thumpr camshaft packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS camshaft packages include: * Thumpr LS camshaft * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
Not Yet Reviewed
$865.95
Trick Flow® High Port® 225 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost superchargers or turbos, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide additional material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails. Trick Flow® High Port® 225 cylinder heads are available fully assembled or as bare castings and sold individually.
( 3 )
$849.99
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$899.99
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
Building off the proven success of the Animal engine, Briggs & Stratton M-Series crate engines are the first dedicated racing engine engineered to meet the needs of the Quarter Midget market. Right out of the box, the M-Series is focused on the consistency and simplicity that racers expect. Briggs & Stratton race-only M-Series crate engine specs and features: * Performance and durability: Technology from OHV racing engineered to the specific needs of Quarter Midget racing * Assembled by hand and tested to strict quality standards * Reinforced, cast iron sleeved, dual ball bearing racing cylinder * Single cast, custom aluminum alloy cylinder head with high-flow intake port, custom seat/guide material * Squeeze cast, T-7 heat-treated aluminum rod with reinforced I-beam * Carbon steel crankshaft with induction-hardened, micro-polished, crankpin-reinforced timing gear—and hardened splined output shaft for 6-1 gearbox (555721) * Custom top control plate firewall clearance * Cam ground, barrel faced, eutectic alloy piston with 3-piece ring set with chrome faced top ring * High-silicon racing engineered valve springs for seasons of racing * High-grade stainless steel dished valves with nitrited exhaust * Three-piece automotive style keepers and reinforced rocker arm and lock ball * PVL digital ignition with built in 6,100 rpm rev limiter * PVL steel hub, cast aluminum flywheel * Briggs & Stratton tooled 22mm round slide, fully adjustable jet carburetor * Custom graph oil composition head gasket
Not Yet Reviewed
$759.00
PROMAXX Performance OE-replacement Jeep inline cylinder heads offer direct bolt-on power. Developed and designed from factory castings, these iron heads feature hardened valve seats and heavier-than-stock castings to resist cracking and warping. They replace your stock components and restore original performance. Once again, your rig will be readied to take on aggressive off-road adventures. The heads are available complete with valves and springs. Order the model recommended for your engine application.
( 3 )
$937.00
Victor and Victor Jr. Series aluminum heads are designed using the latest induction technology for outstanding performance and maximum horsepower. They're ideal for the small block Ford Windsor, and small and big block Chevys. Victor Jr. Series heads are perfect for many types of competition and ultra-high performance street machines. They include threaded inserts (heli-coil) in rocker stud and exhaust manifold bolt holes. They have hardened seats and bronze valve guides for strength and durability, and a minimum 9/16 in. deck thickness and machined valve cover rails provide a more consistent gasket seal. Victor Series heads are a step above the rest, for even greater gains in horsepower. All of these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports, and specially contoured combustion chambers.
( 2 )
$782.50
Outfit your top end with a set of these assembled ATK High Performance aluminum cylinder heads for small block Chevrolet. They're cast, machined, and assembled with A356 aluminum alloy. The heads feature the latest port designs for maximum efficiency and increased power, and improved stock exhaust port location for better header fitment. ATK High Performance aluminum cylinder heads for small block Chevrolet include: * 2.020 in. stainless steel, swirl polished with undercut stem intake valves * 1.600 in. stainless steel, swirl polished with undercut stem exhaust valves * Manganese bronze valve guides * Alloy valve seats * 1.437 in. diameter valve springs (.600 in. max valve lift) * Chromoly 7-degree valve spring retainers * Single groove 7-degree valve locks * Valve spring locators * 5/16 in. flat pushrod guideplates * 3/8-24 in. rocker arm studs
Not Yet Reviewed
$798.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
