Availability
Showing In Stock Items. Show All 47 Items.
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$926.99
—
$937.99
Summit Racing™ offers a range of diesel performance pistons in different over-sizes for your rig. These precision-manufactured parts are tough and feature skirt coatings and anodized top ring lands for long life. Order the replacement pistons recommended for your engine application.
Not Yet Reviewed
$785.99
—
$910.99
Howards Cams ProMax 2618 race pistons are low-silicon and stronger pistons that you need for racing! Forged from 2618 billet bar stock and then heat-treated and aged to a T61 condition, ProMax race pistons have less than one percent silicon content to stand up to the most extreme racing stress. Plus, Howard Cams' X-beam forging design produces a stronger piston than most standard pistons for the ultimate in performance. These 2618 race pistons also have the ability to keep their shape under extreme pressure and high rpm with no skirt shrinking! CNC-turned skirts, oversized valve pockets with radius valve reliefs, forced pin oilers, accumulator grooves, double Spirolox, and lock removal indents are standard features. Lightweight, heat-treated, aircraft-quality wrist pins are also included. Pump up the power of your race engine with the serious strength of American-made ProMax 2618 race pistons from Howards Cams.
Not Yet Reviewed
$782.99
—
$922.99
Mahle forged diesel race piston and ring kits are designed to withstand the extreme cylinder pressures of your high-boost diesel engine. Forged from strong aluminum alloy, these race pistons are machined for less weight and low compression ratios; and to reduce drag, scuffing, and friction the piston skirts receive a Grafal coating to optimize performance. The kits include a set of high-quality piston rings to get you all sealed up. With almost 90 years of racing heritage and technology, Mahle knows what your high performance diesel needs to keep performing. Get a competitive edge for your diesel-powered race rig with Mahle race piston and ring kits.
Not Yet Reviewed
$940.31
RaceTec pistons are the highest quality, precision manufactured options available made from forged or billet 2618 aluminum alloy. Utilizing the latest in CAD software and modern CNC machining centers, it is extremely durable and perfect for your high-horsepower application. RaceTec's in-house design and dyno-proven forgings ensure the strongest and lightest piston for your requirements. They offer a long list of sizes and styles. Choose the proper fit for your build. Features for most RaceTec pistons: * CNC Precision used in every manufacturing operation * Valve pockets machined for oversized valves and high lift cams * Critically machined ring grooves * Top ring land gas distribution grooves to enhance performance and improve ring seal * Wrist pins, pin fit, wire locks, broached double pin oilers, and accumulator groove are included * Diamond tooling used throughout production, including ring grooves and skirts
Not Yet Reviewed
$947.70
—
$1,053.00
Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with many great features, including: * Forced piston-pin oilers * Double Spirolox pin retainers * Valve pockets engineered for oversized valves and modern high-lift cams * Fully CNC-machined skirts to deal with high heat and side loadings * Radiused domes (on most applications) * Balanced to +/- 2.5 grams * Aircraft-quality pins Hundreds of models are available, with bore, stroke, rod length, and piston style options to best suit your replacement or upgrade needs. Order the set compatible with your vehicle and engine application.
( 26 )
$759.99
—
$959.99
D.S.S. Racing SX-Series forged pistons and rings are the perfect find in your hunt for horsepower! Why? They're high-quality, lighter than stock, and value-priced! D.S.S. SX forged piston and ring kits offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons and rings are more than capable of getting your engine blower, turbo, and nitrous ready! Kit includes a DSS DM piston ring set featuring ductile moly steel top rings and flex vent oil rings. Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons and rings.
( 4 )
$754.95
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$774.95
—
$904.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
Not Yet Reviewed
$1,054.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$804.95
—
$934.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,054.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
( 2 )
$819.95
—
$939.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series piston and ring kits increase your horsepower potential without killing the budget. Forged and machined with your choice of premium aircraft quality 4032 or 2618 alloy, these kits are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$754.95
—
$1,054.95
Mahle Wissota PowerPak Plus piston and ring kits are power-packed packages for dirt track racers. They're hand-deburred, forged aluminum pistons fully machined and feature a phosphate dry lubricant coating. The lightweight slipper skirt forgings are given Mahle's Grafal anti-friction coating to reduce drag. PowerPak Plus kits also feature CNC-finished pin bores, high-strength steel pins, race-proven round wire locks, and include their low-drag ring pack. Fit your high-rpm dirt track race car with low-drag pistons and rings made especially for your year/make and engine application.
( 1 )
$762.16
—
$915.24
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 22 )
$751.09
—
$1,094.93
On Sale
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$1,082.00
$753.30
—
$973.80
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 18 )
$750.99
—
$1,119.99
Wiseco RED Series piston kits are available for a wide range of popular domestic V8 platforms—for applications from drag racing to Circle Track. These forged pistons utilize race-engineered design to offer the strength and durability that performance engines need, with precision-machined features to provide a competitive edge. RED Series offers the ultimate balance of performance and value. Order the piston set recommended for your year/make and engine family. Features include: * Engineered, forged and machined from 2618 aluminum for tensile strength needed in performance racing and power adder applications * Dedicated forgings allow for optimized, engine-specific strutted design to maximize strength-to-weight characteristics * ArmorGlide skirt coating reduces operating friction, noise, and skirt and cylinder wear * Horizontal slot oiling in pin bores maintains optimal wrist pin and small-end lubrication, critical for long service life * Accumulator groove helps maintain consistent ring seal and power * Each part number includes premium rings * Available for a variety of engines, such as SBC, LS, Ford Coyote, and more
( 2 )
$799.99
—
$957.99
JE Pistons 350/400 small block dome top pistons are high-compression pistons that are compatible with most aftermarket 23 degree heads and are ideal for drag race and Circle Track applications. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC ring grooves are designed for 1/16, 1/16, 3/16 rings. However, these will not fit JE Pistons Pro Topline or Brodix cylinder heads.
( 1 )
$974.99
—
$1,024.99
JE Pistons big block open chamber dome top pistons are an excellent choice for drag race applications. Their compression height is figured using a 9.780 in. block height with zero deck clearance. The pistons include a pin, double Spiro locks, and double pin oilers. Their precision CNC-machined ring grooves will accept 1/16, 1/16, 3/16 rings.
( 4 )
$1,024.99
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications, and their performance has been proven in victory lane time and time again. JE Pistons big block inverted dome top pistons are forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications, and they are designed specifically for each engine and use application to provide optimized performance durability. They feature JE Pistons' proprietary Forged Side Relief (FSR) forging design to minimize friction and power loss with reduced skirt width and save additional weight with a shorter wrist pin. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. rings (not included). JE big block inverted dome top pistons are available in different size specs, and can be ordered individually or in larger sets.
( 1 )
$949.99
—
$1,024.99
JE Pistons 302/351W big bore dome top pistons for small block Ford are available in large bore sizes to accommodate new aftermarket race blocks and most aftermarket and factory heads. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings. Cleveland and TFS twisted wedge heads will require custom pistons.
Not Yet Reviewed
$1,024.99
—
$1,099.99
Mahle Original individual Fire-Power piston rings are engineered to withstand the punishment of today's high-powered, nitrous oxide-injected, turbocharged and supercharged race applications. PC479 compression rings will provide superior ring durability, stable radial tension, superior combustion sealing and oil control, while protecting the cylinder walls.
Not Yet Reviewed
$854.99
Mahle Motorsports offers several Pro series pistons that are designed for professional, oval, dirt, track, and drag racing. Mahle Motorsports machines the correct valve reliefs, dome profiles, and ring grooves for competition. The pins are fitted with the proper clearances and have a factory-applied phosphate and Grafal skirt coating, eliminating the expense and uncertainty of aftermarket coatings. Every piston is hand-deburred and inspected to ensure quality and performance.
( 1 )
$1,160.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
