Availability
Showing In Stock Items. Show All 32 Items.
ARB on-board brushless air compressors are the ultimate units, featuring brushless electric motors, built-in fans for active cooling, cutting-edge smart technology, and an impressive 50 percent increase in air output compared to ARB's current market-leading compressors. These ARB brushless compressors are compatible with their existing range of air accessories and hose kits, as well as air lockers, making the choice to upgrade your current air system super easy. Spend less time inflating and more time having fun with an ARB brushless air compressor on board. Select the single or twin motor compressor to have on-board. Features and benefits: * Active cooling system has been included with a fan in each motor/compressor assembly to achieve higher performance and longevity * Electronic speed control maintains optimum performance and operations across all pressure and ambient temperature conditions * Status reporting provides live diagnostics via audio and visual alerts * Voltage and overload protection guards the compressor and power supply from damage due to voltage spikes, drops, fluctuations, overcurrent, and motor stalls * Brushless unit constantly monitors itself and can make adjustments to account for factors, such as temperature and variations in vehicle charging systems * Camlock quick-release mounts make installation and removal a simple process * Brushless motor means no need for the mounting of relays, further reducing the installation time * Twin motor compressor features Smart Start--staggered "Power-On" for twin variants to reduce the power spike at start up, allowing brushless twins to start up on vehicles with smaller charging systems * IP67 water-resistant rating
Not Yet Reviewed
$949.95
QA1 Mustang II coilover conversion systems give you a suspension that rides like a dream. They consist of QA1 shocks, plus coil springs that are specifically designed for replacing the factory shock and spring combination with a coilover unit. These systems offer soft compression and rebound adjustability for those enthusiasts who like to fine-tune their rides.
( 32 )
$902.45
—
$917.95
Struts cycle millions of times over their lifespan. Replacing an aging air suspension with new Arnott Firestone air shocks and struts will yield the comfort, luxury, and auto-leveling desired, with an eye towards cost-effectiveness. Arnott New Firestone air shocks and struts are universal assemblies, fitting both the left and right sides, while supporting your vehicle's auto leveling functionality. They will replicate the OE-like ride and are built with Tier 1 components. Choose the ones designed for your vehicle. Features: * Dust baffles and aluminum cans protect the unit from road debris * Longer-lasting seals * Polyurethane bump stops * Heavy-duty crimping ring * CNC-machined aluminum or stamped steel top
Not Yet Reviewed
$881.61
—
$963.24
Suspension is one of the most important factors in determining your vehicle's day-to-day drivability, and the first step in suspension tuning is to upgrade your vehicle's stock springs. H&R Sport springs are high-quality units that will not set or sag, and are designed and manufactured to be strong, resilient, and durable. H&R's Sport spring kits streamline the look of your vehicle with a reduced fender well gap, as well as lower your vehicle's center of gravity, reducing body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. Additional features: * Crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance * Shot-peened to increase their life by more than 200 percent * Each spring is 100 percent tested * All production is completed in-house, so product quality is ensured * H&R's ISO9001 certified production facility in Germany
( 2 )
$768.99
—
$1,098.99
Icon Vehicle Dynamics billet rear link arms are available for upper and lower positions, and both styles are adjustable. Icon's billet aluminum link arms are significant upgrades over the factory units due to increases in strength and performance. CNC-machined in-house from 6061 aluminum and anodized for corrosion resistance, they feature PTFE-lined FK rod ends for increased suspension articulation and reduced deflection, plus multi-durometer bushings are installed that allow for noise-free operation and maximum angularity without the need for periodic greasing and/or other maintenance. Together, the quality rod ends and bushings allow your vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. The link arms also offer on-vehicle link arm length adjustability using Icon's double adjuster system. Finally, after the design phase was completed Icon engineers put these parts through the "ICON1K" real-world test cycle for a final stamp of approval. They are covered by Icon's lifetime warranty.
Not Yet Reviewed
$1,089.95
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$759.99
Unity Automotive complete strut assemblies include all the components required for a strut replacement in a single, fully-assembled unit. All the parts feature OE design, and they're pre-assembled—a breakthrough that saves on installation time by eliminating the safety hazards associated with coil spring decompression. Every assembly features application-engineered valves to optimize each vehicle's unique ride and handling characteristics. Exceed your original equipment standards with the Unity Automotive complete strut assembly designed to fit your application.
( 49 )
$788.98
—
$989.98
Who doesn't love an amazing 2-for-1 deal? VIAIR 444C dual-performance value-pack air systems furnish you with not one, but two identical air compressors for your garage, business, or vehicle. These units have countless uses, and are ideal for low-rider cars or trucks with an air suspension system. The versatile 12 V compressors can operate on their own, or connected to an air tank (10 gallons max). For some applications, you may want both compressors running off the same tank. The head assembly features a newly-developed intercooler for more efficiency. Choose from either a polished chrome or stealth black finish--and remember, when the pressure's on, make sure you're equipped with VIAIR … "the heart of your pneumatic system." VIAIR 444C dual-performance value-pack air systems include: * Two 444C compressors * 2 stainless steel braided leader hoses with inline check valve * 2 air filter assemblies * 2 remote mount brackets * 4 remote mount fittings * 4 spare air filter elements * 6 airline clips * 8 sets of nuts, bolts, washers, and lock washers
( 8 )
$819.99
Fully assembled and bench-tested ARB on-board high performance air compressors install into your vehicle and include a full, snap-together, fuse-protected wiring loom with solenoid plug-in contacts, mounting hardware with reinforcing bracket, and an OEM-quality compressor isolating switch. With the addition of an ARB-171302 pump-up kit (sold separately), they can be used to activate ARB Air Lockers, and perform other functions such as inflating camping gear. So what makes these compressors special? They're small enough to fit into even the tightest space and quiet enough to mount in the cab. They have enough output to air up four 35 in. to 37 in. tires in a single duty cycle and typically air up a 35 in. tire in just over two minutes. And, they work. ARB has tested these units in ovens, freezers, underwater, and in the silty dust of the Simpson Desert and they continue to perform. Features of ARB on-board high performance air compressors include: * Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply * Fully sealed components for moisture and dust protection * Over-pressure safety valve-equipped * Pressure switch-controlled air manifold system specially designed for ARB Air Lockers * Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life * Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing * Motor is internally thermal-protected against extreme temperature damage * Comprehensive-photo illustrated installation guide * Range of accessories available
( 9 )
$766.60
—
$813.55
Eliminate the flex found in your stock A-arms and add front-end rigidity with increased strength by installing UMI Performance 1993-2002 GM F-body front upper and lower A-arm kits. Designed to outperform your stock setup, these front upper and lower A-arm kits are made from strong DOM steel tubing, 3/16 in. thick CNC-machined ball joint mounts, and they are supplied with greasable polyurethane bushings. These rod ends feature a PTFE-lined, self-lubricating race design for quiet operation and allow free movement and travel to prevent bushing bind. The lower A-arms feature new ball joints and an adjustment if needed. UMI Performance 1993-2002 GM F-body front upper and lower A-arm kits will enhance your daily driver or race car.
( 11 )
$984.92
—
$999.99
Pedders EziFit shocks and struts are now an ideal alternative to buying separate components when converting your vehicle from original equipment suspension to a more high performance suspension setup. Reduced installation time is the key benefit from the use of the Pedders EziFit, as the spring, shock/strut, and mount are all supplied pre-assembled. No need to use the spring compressor, as the work is already done for you! Just unbolt the old and bolt in the new. Order the model recommended for your car or truck application.
Not Yet Reviewed
$1,079.96
UMI Performance complete front upper and adjustable lower A-arms were built with this in mind--to offer the strongest manufactured item on the market, while adding great weight savings over the stock piece. UMI Performance front A-arms are built using strong DOM steel tubing, 0.188 in. CNC-machined shock mounts, Moog Problem Solver greasable ball joints, and QA1 XM Endura series rod ends. A-arms can be installed on the stock K-member or any aftermarket K-member. They are designed to reduce front-end weight, as well as "unsprung" weight, providing improved handling performance to the front of your vehicle. Additional features include: * 1.250 in. x 0.120 in. mild steel tubing * TIG-welded 4130 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined ball joint cups * Grade 8 shock mounting hardware included * Durable powdercoated finish * Use OEM hardware
( 1 )
$1,029.99
The design of UMI Watts links makes their key components vital for optimizing your rear suspension. The combination of lateral locating ability and roll-center height adjustment makes a Watts link the best choice for axle location in handling cars and a must-have for any serious corner carver or handling enthusiast. Keeping lateral axle movement to a minimum will help prevent the rear-end from having a squirrelly sensation and provide the driver with more control over the car. These links also work well for drag racers, keeping the car from swaying as you shift your way down the track. Make it to the winner's circle with an assist from race-proven UMI Performance fabricated Watts link kits!
Not Yet Reviewed
$999.99
Belltech anti-sway bars are designed to improve handling and steering response by minimizing body roll, while not affecting ride quality. Their anti-sway bars are manufactured from cold formed solid steel and use swedged ends for their superior strength and reliability. They are finished with a high-quality powdercoat and include polyurethane bushings and high-grade hardware.
( 211 )
$884.00
Old Man Emu BP-51 Bypass shocks feature revolutionary, patent pending technology engineered to deliver unparalleled on and off-road performance for your 4x4. Developed and extensively tested under the harshest conditions in Australia, these big bore, position-sensitive bypass shock absorbers with remote reservoir bolt onto your vehicle without any vehicle modifications. They combine considerable ride comfort around town, with significant amounts of end-zone damping for exceptional chassis control and handling off-road. Order the model designed for your vehicle application. Key features of Old Man Emu BP51 Bypass shocks include: * 6061 grade aluminum remote oil canister (for increased oil volume, resulting in lower oil temperatures) * Durable Dash 6 high-temp PTFE hose (incorporates high-flow fittings for optimum oil flow) * Large PTFE-lined spherical bearings * Spring seat (6061 grade aluminum) * High-quality X5K grade steel coil (incorporates application-specific design for use on various coilover models) * Adjustor (for adjustment of spring preload and ride height) * Top hat (6061 grade aluminum) * Rubber bushings (oversized) * Shaft guard (replaceable, impact resistant, high-density polyethylene) to prevent damage to shock absorber shaft * Pinion shaft (hard chromed, for strength and durability) * Adjuster (allows fine-tuning for ride comfort and control to suit varying vehicle and trip requirements) * Shock absorber body (6061 grade aluminum with hardened finish for increased heat dissipation and corrosion resistance) * Piggy back clamp (allows easy connection of remote oil reservoir to main shock absorber body)
Not Yet Reviewed
$949.95
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$839.95
Add the ultimate lateral differential location device to your vehicle with BMR Watts link kits. They locate the rear-end housing and eliminate lateral axle movement by keeping the differential centered under the car throughout the suspension's entire range of motion. Manufactured from heavy-duty rectangular or drawn over mandrel (DOM) steel tubing and laser-cut steel plate, BMR's kits are the ultimate in strength. Double-shear link mounts connect the adjustable links to the center pivot for strength and zero deflection. Center pivots use a double-shear mount with a greasable Delrin bushing for smooth, bind-free movement. The links are built from heavy-duty aluminum with left and right hand threaded rod ends for easy on-car adjustability. They feature zinc-plated, heat-treated, chromoly, self-lubricating, PTFE-lined rod ends and, where applicable, high-durometer polyurethane bushings. They also feature 304 stainless steel, custom-designed rod end spacers. BMR designed their Watts link kits to work well for street performance, drag race, and road race applications. They are 100 percent bolt-in and require no cutting or modifying of the chassis. The kits are adjustable, allowing for fine-tuning and bind-free suspension articulation. Center pivots can be installed in several positions for multiple roll center locations. With strength, adjustability, and zero lateral axle movement, they are the perfect upgrade for the enthusiast that requires maximum performance from their suspension. BMR Suspension's Watts link kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3 to 4-hours.
( 1 )
$989.95
Aldan American TrueLine shocks are designed to work with factory or aftermarket control arms, air bag shock replacements, and rear-end shock absorber setups. Available in a variety of lengths with polyurethane or spherical bearing mounts for stock or lowered car and truck applications, TrueLine shocks feature 2 in. bodies machined from 6061 T-6 billet aluminum—providing a lightweight, high-strength solution for reducing unsprung weight. They use factory shock mounting locations for an OEM-quality fit, and they offer single shock adjustment for fine shock tuning and a smoother, more consistent ride. The shocks are also fully rebuildable and serviceable for a lifetime of use. Gain improved handling and better ride-quality with Aldan American TrueLine rear shocks.
( 2 )
$1,049.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
