Availability
Showing In Stock Items. Show All 74 Items.
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,035.00
—
$1,045.00
Chassis Engineering bolt-on IFS mounting kits eliminate bump steer and other unpleasant surprises, resulting in a safe and enjoyable ride. These custom-made, fully bolt-on crossmember kits are based on the Pinto-Mustang II independent front suspension system and will provide the best method available to get the correct height geometry. They will lower your car about 2 to 4 in. when compared to stock. Plus, with the adjustable upper coil spring pods, there is about 2 1/2 in. of additional adjustment possible to further fine-tune your setup. Chassis Engineering bolt-on IFS mounting kits features include: * Exclusive adjustment system * Interlocking design * Superior strength * Easy and accurate installation
( 4 )
$1,012.00
Classic Performance 1962-67 Chevrolet Nova front subframe kits are one of the most beneficial upgrades available for your first generation Nova. By eliminating the factory strut rods and adding adjustable forward control arms, they add stability, align-ability, improved steering response, and over 2 in. of additional ground clearance. They can accommodate both factory and aftermarket sway bars with up to 1 in. diameters and feature a unique 1-piece crossmember that ties both frame rails together by bolting in where the factory strut rod mounts were located. No cutting or welding required, the installation is all bolt-in. Kits include: * 2 one-piece, 1 1/4 in., 0.120 wall DOM tubular lower control arms with Classic Performance premium ball joints * Bolt-in, 1/4 in. thick steel crossmember * Four alignment cam kits * Grade 8 mounting hardware * Low-friction, long-life bushings * Optional upper control arm bushings
( 15 )
$838.99
Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.
( 131 )
$958.96
UniSteer Camaro/Nova rack and pinion kits are superior steering components designed with racers in mind. They're engineered to match the factory geometry for specific Chevy model years—resulting in no-bump steering. These racks come mounted on a custom bracket that makes installation a breeze. The unit mounts to the rear of the crossmember, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms; no fabrication is required. Compact and lightweight, the parts offer maximum ground clearance and can drop up to 65 lbs. off the stock front end. UniSteer rack and pinion kits also include outer tie rods, mounting bracket, hardware, and instruction sheet for installation. Order the conversion kit tailored for fitment on your vehicle. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 18 )
$768.99
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 138 )
$916.95
—
$979.95
Bilstein B8 5100 leveling kits are high performance packages that provide more ground clearance, allow for larger tires, and increase wheel travel and articulation on the front axle. They consist of B8 5100 shock absorbers combined with custom matched, longer travel, cold wound front coil springs and all necessary supporting components and hardware. These simple yet effective kits will bolt into the factory locations and allow you to run 35 in. tires with stock fenders. Bilstein B8 5100 leveling kits provide the full benefit of taller tires, while providing a smooth and stable ride both on- and off-road. Select the kit designed for your vehicle.
Not Yet Reviewed
$756.00
Are you looking for a high-quality set of air compressors for your unique ride? VIAIR 450C Dual Performance Value Pack air systems are sure to provide enough air for your vehicle's needs. These 12 V air systems are designed to fill air tanks with volumes of up to 10 gallons and feature a 110 psi cut-on/145 psi cut-off pressure switch. Whether you're filling tires or your air suspension, these VIAIR 450C Dual Performance Value Pack air systems have the capabilities to get the job done. Air systems include: * Two 450C compressors * 2 air filter assemblies * 2 remote mount brackets * 4 remote mount fittings * 4 spare air filter elements * 2 leader hose clips * 6 air line clips * Hardware kit with nuts, bolts, and lockwashers * 2 heavy-duty 40 amp relays * Heavy-duty pressure switch
Not Yet Reviewed
$917.50
All-Pro Off-Road rear suspension lift kits with Bilstein shocks package everything you need to lift the rear of your truck with quality components! You get a choice of 3, 4, 5, or 6 in. lift long-travel rear leaf springs. They're longer than stock to provide much greater travel and articulation. With an integrated lip for easy placement, mounting is a snap; simply weld the rear spring hangers onto the frame. Kits are available for 1979-88, 1989-95,1995-2004, and 2005+ Toyota applications. Kit includes: * (2) 3 in., 4 in., 5 in., or 6 in. rear 56 in. long-travel springs with bushings * (2) 5100 Bilstein shocks * (1) set of two 1.5 in. longer greaseable shackles * (1) Extended rear brake line * (1) Rear U-bolt flip kit * (2) Rear shock mounts with hardware * (2) Heavy-duty spring hangers with greaseable bolts * (2) 3-hole perches * (2) Rear shackle mounts
( 1 )
$899.99
—
$999.99
Pedders TrakRyder leveling kits provide a front lift to level your vehicle's stance, along with improved rear shock performance and durability—all without compromising comfort. These spring and shock kits are an ideal alternative to buying separate components to convert your vehicle's OE suspension to a higher performance setup. Each Pedders leveling kit supplies rear TrakRyder foam cell shocks and EziFit front struts and springs, which saves installation time as the spring, shock, and shock mount is all supplied pre-assembled--no need to use spring compressor; just unbolt the old and bolt in the new. Features and benefits: * Direct OE fitment * Lifts front 35mm * Cellular foam membrane: -- Allows full oil contact with inner and outer housing -- Provides larger cooling area -- Eliminates shock fade -- Improves shock performance * Factory-style bracketry * Reduced installation time * Exceptional load carrying
Not Yet Reviewed
$764.96
ReadyLift Suspension tubular radius arm upgrade kits are designed to correct the suspension geometry on lifted models. These new radius arms are heavy-duty and built to handle the use and abuse demanded out of Super Duty trucks. The arms are formed inward, allowing for additional clearance and providing even more space for oversized tires. The direct bolt-on design promotes quick and easy installation. The arms are available for a variety of late-model trucks. Additional details: * Heavy-duty tubular construction * Machined from steel with a black powdercoat finish * Designed to correct suspension geometry on 3.5 in. to 6 in. lifted models * Helps to correct the caster angle * Allows for larger tires to be installed * Ease of installation with direct bolt-on design * Oversized rubber bushings to better isolate road noise and vibration harshness * Notes: Will not work on Super Duty's with height sensors Includes: * Radius arm, left, assembled * Radius Arm, right, assembled * Cam bolt kit
Not Yet Reviewed
$789.95
—
$839.95
All-Pro Off-Road rear suspension lift kits offer everything you need to install their springs on your 1995-97 or 1998-2004 Tacoma (with the exception of the shocks). Select the Standard or heavy-duty Expedition leaf springs. Kit for 1995-97 applications includes: * Rear spring hangers with 120mm greasable bolts * Rear shackle hangers with bushings * Rear leaf springs (Standard or Expedition) * Rear 5 in. straight shackles with 120mm greasable bolts * Rear flip kit * Extended rear brake line with clip * Rear lower shock mounts with hardware Kit for 1998-2004 applications includes: * Rear leaf springs (Standard or Expedition) * Rear flip kit * Extended rear brake line * Rear lower shock mounts
Not Yet Reviewed
$899.99
—
$999.99
Save time and money with a full All-Pro Off-Road suspension kit. These kits (without shocks) are intended for those who plan on using adjustable coilovers and need to complement them with a rear spring lift and adjustable control arms. Choose between Standard and Expedition leaf springs; optional bump stops are available. Each kit comes with a pair of All-Pro tubular chromoly upper control arms, extended brakes lines, and a U-bolt flip kit. Order the model recommended for your vehicle application. Product details: All-Pro upper control arms: * Tubular chromoly upper A-arms * Arms use 1.25 in. uniballs * New flush-mount hardware and spacers * Uniball spacers are CNC-machined from heat-treated stainless steel * Polyurethane bushings with thick inner sleeves * Includes Grade 8 and high-strength 12 pt. hardware * Gray powdercoat finish * Maximum wheel backspacing: 4.50 in. All-Pro Leaf Pack (choose Standard or Expedition): * A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves * Double "military" wrap provides extra strength for the main leaf * "Torque Leaf," an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality * Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure * PTFE anti-friction pads between leafs provide smoother flex, lessen spring wear, and reduce noise * Leafs are shot-peened after forming to relieve stress * Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag * Comprehensive 12-month warranty for non-racing applications when properly installed (Note: Using a lifting block or shackle flip with the All-Pro Off-Road springs will void the warranty on the springs.) All-Pro rear U-bolt flip kit: * All-Pro Off-Road U-bolt flip kit turns the U-bolts upside down so the bolt ends face up, away from the rocks. This mod both prevents damage to U-bolt threads and increases ground clearance. The kit comes complete with new heavy-duty U-bolts, plus hardened U-bolt nuts and washers. Tapped plates are also included in every kit. All-Pro rear extended brake lines: * These steel braided brake lines are great for your lifted Toyota. The rear brake lines are 24 in. and designed for stock ride up to a 4 in. lift. U.S. DOT-approved, they exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106.
Not Yet Reviewed
$999.99
Who doesn't love an amazing 2-for-1 deal? VIAIR 444C dual-performance value-pack air systems furnish you with not one, but two identical air compressors for your garage, business, or vehicle. These units have countless uses, and are ideal for low-rider cars or trucks with an air suspension system. The versatile 12 V compressors can operate on their own, or connected to an air tank (10 gallons max). For some applications, you may want both compressors running off the same tank. The head assembly features a newly-developed intercooler for more efficiency. Choose from either a polished chrome or stealth black finish--and remember, when the pressure's on, make sure you're equipped with VIAIR … "the heart of your pneumatic system." VIAIR 444C dual-performance value-pack air systems include: * Two 444C compressors * 2 stainless steel braided leader hoses with inline check valve * 2 air filter assemblies * 2 remote mount brackets * 4 remote mount fittings * 4 spare air filter elements * 6 airline clips * 8 sets of nuts, bolts, washers, and lock washers
( 8 )
$819.99
QA1 Mopar K-members are direct bolt-ins for Chrysler, Dodge, and Plymouth vehicles. They are manufactured from quality materials and are engineered for maximizing strength. The K-members feature motor mount attachment points to accept factory and aftermarket motor mounts, and their tubular design also allows for increased header clearance.
( 28 )
$861.95
Bilstein B8 6112 suspension kits are for those seeking serious off-road action to carry them over the terrain. Each of their B8 kits will optimize the off-road capabilities of your rig with a 60mm digressive piston for increased damping control, specially designed cold wound springs, and an adjustable spring seat, which allows for vehicle leveling, larger tires, and increased ground clearance. They are a direct bolt-on for many applications and utilize the OEM top mount and spring isolators. Are you searching for the ultimate solution to your off-road adventures? One of these Bilstein B8 6112 front suspension kits will be the definitive answer.
( 11 )
$885.00
—
$937.00
Classic Performance tubular control arms are designed to add up to five degrees of caster in certain applications, while providing full wheel travel. They're manufactured from 1.250 in., 0.120 in. thick wall DOM tubing, with pivot barrels made from 1.500 in., 0.188 in. thick wall DOM tubing to help eliminate distortion. These control arms use bushings made from self-lubricating, non-squeak patented material that will outlast any rubber or polyurethane bushing. The control arms are designed as bolt-in replacements for your factory originals. Classic Performance tubular control arms will tighten up your front suspension and give you that performance ride through the corners and on straight roads. Select the model and options recommended for your vehicle.
( 125 )
$973.99
—
$974.99
BMR Suspension has developed a manual rack and pinion conversion kit that will eliminate bump steer and allow for more header clearance. They started with a clean slate and came up with kits for practically any application, giving you accurate control and steering response. BMR manual rack and pinion conversion kits have a straightforward, bolt-in installation requiring no fabrication or welding. All mounting hardware and installation instructions are included.
( 1 )
$979.95
—
$1,009.95
On Sale
Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!
( 15 )
$750.95
—
$999.95
On Sale
For safer load carrying, Rough Country air spring modular kits keep your ride level when towing with their durable powdercoated steel mounting brackets and double-convoluted air bags. They can be used on stock height vehicles (the included spacers and related hardware won't be used) as well as lifted models. The air bags feature an internal bump stop and installation is simplified with the push-to-connect air fittings. Versions include those with and those without an onboard air compressor, plus complete kits with a wireless remote system. Transform your vehicle into a legend with an assist from the Rough Country air spring kit best suited for your application. More product features and items include: * Optional onboard air compressor kits and wireless remote systems can be added later * DOT-approved air line * Fittings (90-degree) * (2) Air bags (5-100 psi minimum-maximum) * Inflation valves (manual Schrader) can be hidden inside fuel door or used as license plate hold-downs * U-bolt plates * Block shims * Hardware kit with detailed instructions that include a BOM (Bill of Material) and torque specifications * Some kits will include headlight frame and air bag brackets (application dependent) * This product will not increase any vehicle's towing capacity
Not Yet Reviewed
$815.95
—
$863.95
BDS Suspension offers traction bars for a variety of applications, including many Chevy, GMC, Dodge, Ram, Ford, and Toyota vehicles from 1988 and up. Improve traction without limiting wheel travel with these kits, made with heavy-wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. They feature full float design for bind-free performance and can be installed with a range of lift heights. Additional details: * Fabricated from 2 in. O.D. x 3/16 in. wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame * Axle mount uses BDS's ultra-durable large-forged flex end and jam nut * Using a forged housing with large 1 1/4 in. x 12 threaded shank, a single-sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction * At the frame end, the bar uses a durometer-specific polyurethane bushing and free floats in the traction bar, utilizing a pair of dual-stage internal compression springs and UHMW polyurethane bearings * Adjustable axle wrap control using dual-stage resistance springs * Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation * Spring preload can be adjusted on the vehicle without disassembling the traction bar * Traction bar ends are greaseable and rebuildable * Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation
( 1 )
$904.90
—
$969.90
Trail-Gear Classic rear lift kits feature long-travel springs and shocks for super flexibility on the trail. They include welded rear spring hangers, greasable rear shackles, shock mounts, U-bolt flip kit, extended brake line, spring perches, and instructions. Best of all, you get a pair of Bilstein shocks for use with all of the increased lift height.
( 1 )
$899.99
Larger tires and a weak drag link collar can severely affect your vehicle's performance. Rock Jock offers a great setup—Currectlync steering systems! Each of these heavy-duty tie rod and drag link systems is built to be stronger than stock. Both rods are constructed of forged alloy steel, and include a heavy-duty steering stabilizer bracket and necessary hardware to facilitate an easy bolt-on installation. Enhance your strength with Rock Jock Currectlync steering systems.
( 2 )
$788.00
Clearance
Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts
( 73 )
$750.99
—
$996.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
