Availability
Showing In Stock Items. Show All 120 Items.
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$1,049.95
On Sale
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$892.25
—
$1,109.80
$803.02
—
$998.82
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$849.95
—
$1,049.95
S&B Filters fuel tanks maximize the space under your diesel truck and empower you to fly by more gas stations like a compact, fuel-efficient car. The folks at S&B know even lifted trucks often sacrifice clearance for larger holds. That's why they design their tanks with a contour around the driveshaft area, helping you maximize clearance. A transfer pump fitting allows you to pull fuel from your now larger tank for equipment—saving valuable space in your truck's bed. Spend less time at the pump and more time driving with the S&B high-capacity replacement fuel tank designed to fit your vehicle. Features, items, and specs: * Brass vent and rollover vent valve * Included baffles cut down on fuel sloshing * Integrated fuel sump for aftermarket fuel pumps * Integrated OEM-style fitting for sending unit installation ease * Front cradle support design (instead of a band that wraps under) to help avoid band debris damage and failure where it's most likely to occur * Front support skid plate on some models * No modifications necessary for installation
( 5 )
$849.00
On Sale
Aeromotive 340 Stealth fuel tanks conceal impressive power components. Hiding inside the tank is the high-output electric fuel pump mounted to a quality material hanger assembly and boasting an impressive 340 lph flow! They also feature an innovative baffling/tray system to control fuel slosh and keep the fuel pump submerged. Their design provides superior EFI street performance with OEM fitment while also supporting daily driving down to very low levels of fuel in the tank. Order the Aeromotive 340 Stealth fuel tank best suited to match your vehicle's specifications for enhanced fuel storage and delivery!
( 43 )
$1,093.85
—
$1,127.30
$984.46
—
$1,014.57
Rhodes Race Cars fuel tanks are made from .100 thick, 5051 aircraft-grade aluminum alloy—ensuring the best quality material and craftsmanship go into every tank. They're designed with your safety in mind. Fully baffled and designed to relocate the fuel tank from the cab area to under the bed near the rear axle, they can increase your fuel capacity to 20 gallons. Rhodes Race Cars fuel tanks come with all necessary mounting hardware.
( 5 )
$799.95
—
$899.95
On Sale
One of the most popular updates for older vehicles is swapping out the carburetor(s) for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and can be difficult to mount properly. Holley Sniper Universal EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They give you the option to install an EFI tank into a vehicle not normally offered. Features include: * Supports up to 550 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Include new tank straps
( 2 )
$949.95
Omix-Ada fuel tanks are available for a wide variety of Jeep applications. These high-quality restoration fuel tanks are direct replacements for your Jeep's original components to ensure a perfect fit and proper operation.
( 13 )
$919.99
On Sale
Brothers Trucks fuel tanks are the result of a creative solution for an easy under bed gas tank conversion when you want to move the classic or vintage stock setup from in or near the cab. They combine a Brothers tank with appropriate hardware for easy installation. While modifications are required for the new fill neck location, in most cases, the rear frame crossmember is unaffected by this installation. Increase the safety factor of your classic truck or SUV with an assist from Brothers Trucks fuel tanks. More product features and specifications include: * Classic applications model includes straps, lock ring, and hardware * Vintage applications model includes special mounting brackets and will require an application-specific sender (original spare tire crossmember removal may be required)
( 1 )
$875.95
Rick's Hot Rod Shop fuel injected fuel tanks are TIG-welded and hand-formed from 304 Grade stainless steel. They feature an electric fuel pump installed and ready to run. The ACDelco fuel pump can support up to 450 hp and puts out 51 psi at 13.5 V. Built into a specially designed chamber, the fuel pump will not suffer from fuel starvation, as flow is provided through -6 AN supply and return ports. Rick's fuel injected gas tanks use a unique baffle system that is designed to control fuel tank slosh. These tanks feature mounting flanges manufactured from 3/8 in. thick, CNC-machined 304 stainless steel stock to ensure a proper seal. They include stainless steel mounting straps and hardware and will accept any aftermarket sending unit, sold separately. Make the switch to EFI--install one of these Rick's Hot Rod Shop fuel injected fuel tanks and your fuel system will have a rock-solid foundation.
Not Yet Reviewed
$884.99
Body Parts offers fuel tanks for a wide range of vehicles. These replacement units are designed to OE specs, and are available in a variety of configurations and tank capacities. Order the model recommended for your application.
Not Yet Reviewed
$851.99
Rhodes Race Cars offers several direct-fit fuel cells. They are made from .100 thick, 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship. Designed with your safety in mind, most options are internally baffled, will include a factory-style, standard, or sumped pickup, and are available with or without a single or dual internal fuel pump. Select the Rhodes vehicle-specific fuel cell needed for your ride.
Not Yet Reviewed
$889.95
—
$999.95
Moeller Marine permanent fuel tanks feature robust polyethylene construction and include swivel pick-ups. They're available in a large selection of shapes, sizes, and capacities up to 150 gallons. Fuel your fun with Moeller Marine permanent fuel tanks. Tank specifications: * Machined aluminum 3/8 in. withdrawal fitting with 360 degree swivel pop lock for hook-up convenience * Ethanol and biodiesel corrosion- and pit-resistant * Complete with fill neck and withdrawal/vent fittings molded directly into the shell * ABYC-compliant fittings with seamless connections to rigid low-perm hoses * UV rating of 8 * Temperature rating of -40 to 176 degrees F * Suitable for either gasoline or diesel use with appropriate return kit * Hold-down grooves molded directly into tank shells for secure attachment with Moeller hold-down kits * Suitable as replacement tanks for boats built before 2011
( 14 )
$841.99
—
$1,027.99
DeatschWerks staged surge tanks are the universal answer to your high-performance fueling needs. From high cornering speeds to hard launches, these aluminum surge tanks prevent fuel starvation, low fuel pressure, and air in your fuel lines. Keep your fuel right where it needs to be with a DeatschWerks staged surge tank! Order the model you need. Features include: * Configurable for single, dual, triple, or external pumps * Vertical or horizontal mounting * Anodized for E85 and methanol compatibility * Available with or without DeatschWerks fuel pumps
( 1 )
$899.00
—
$1,099.00
On Sale
FUELAB dual pump fuel surge tank systems are ideal for Autocross or off-road use—where fast changes in g-forces can allow air to be picked up by the main fuel pump. FUELAB fuel surge tank systems maintain a small amount of fuel to operate their own internal fuel pump that can supply high fuel flow rates, while only needing a relatively low fuel flow rate from the main fuel pump. A return line is required to return excess fuel back to the vehicle's fuel tank. Every FUELAB surge tank features a high-quality billet aluminum construction and long-lasting finish. There are two different sizes available to fit your specific needs.
Not Yet Reviewed
$897.00
—
$905.00
$807.30
—
$814.50
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
Keep your engine cool and improve your vehicle's performance with one of Granatelli Motor Sports radiator expansion tanks. Built to match your exact requirements from 6061 T-6 aluminum for superior strength and styling, these one-piece tanks are much stronger than the factory plastic 2-piece design. On top of that, these coolant tanks feature a unique design that mimics the taper and angles of a factory engine cover for a more custom appearance and have a stock-style threaded neck to allow re-use of your factory coolant cap. Offered in different finishes, these overflow and recovery tanks will provide impressive styling in the engine bay. For performance cooling parts with increased capacity and heat transfer capability, a winning choice is Granatelli Motor Sports products!
Not Yet Reviewed
$881.11
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$999.95
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
—
$1,049.00
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$949.95
The FiTech Go Street EFI 400 hp self-tuning fuel injection systems with Go Fuel in-tank modules makes it easy to convert your carbureted engine to self-tuning fuel injection at budget-friendly pricing. Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance on your gas- or E85-powered vehicle. You don't have to mess with the ignition at all. This FiTech system comes with the latest Bosch 4.2 wideband O2 sensor, throttle linkage that suits most transmissions, three fuel inlet connections, and a built-in fuel pressure regulator. This system is designed for applications making at least six inches of vacuum at idle. To make getting fuel easier these FiTech Go Street EFI 400 hp kits also include FiTech's Go Fuel In-Tank fuel pump module. The unique universal design allows you to install the pump in most tanks ranging from 6 to 15 inches deep. The supplied 340 lph fuel pump is compatible with gasoline, E85, ethanol, methanol and alcohol based fuels. Kits include a billet aluminum module with -6AN O-ring boss fittings, 2 different styles of filters, hardware, seals, and terminals.
( 2 )
$1,063.99
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$899.95
On Sale
Summit Bucks
FUELAB in-tank twin screw brushless fuel pump kits are available for a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. The pumps are black anodized for protection and long-lasting performance—and include a 65 micron straining filter. These aftermarket replacements offer an array of features: --- Pump features: * Compatible with gasoline, diesel, methanol, and ethanol * Twin screw rotor pumping mechanism * 125 psi max operating pressure * 650 to 2,800 hp power support (depending on model) at continuous speed (pump gas, naturally aspirated) * Higher efficiency means less current draw and less noise * Superior priming capabilities * Greater resistance to cavitation (vapor lock) --- Motor features: * Lightweight super-efficient DC brushless motor to minimize current draw * Powerful high flux density Neodymium rare earth magnets * No motor brushes to wear out or corrode (low-sulfur diesel, no problem) * Wet motor design, no dynamic shaft seals that can wear out --- Controller features: * 12 to 16 V vehicle electrical system compatibility * Pump controller included for full speed, PWM (or 0-5 V input speed control, some models) * Continuous duty motor speed --- Construction features: * Compact, lightweight design, less than 3 lbs. * Billet aluminum construction with anodize per MIL-A-8625, Type II * Long life, multi-fuel compatible fluorosilicone static seals * Accepts standard or port style -8 AN fittings --- Pulse Width Modulation compatibility (PWM) * Compatible with most aftermarket ECU's with PWM output frequency * Compatible from 100Hz to 5000Hz * AEM * ECU Masters * Fueltech * Haltech * Holley * Link Engine Management * Megasquirt
Not Yet Reviewed
$1,099.00
—
$1,199.00
$989.10
—
$1,079.10
FiTech Go Street 400 HP EFI system in-tank pump fuel injection master kits include fuel delivery solutions to make converting your carbureted vehicle to EFI easier. These systems feature the Go Street EFI ready-to-run throttle body that sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. It delivers the benefits of quick starts, smooth idle, and self-learning technology. It works with most ignition systems and fits most intake patterns to replace your old carburetor. Each Go Street EFI throttle body is supplied with a handheld touch screen controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. Options for your fuel delivery system: * Go Fuel single fuel cell pump module is ideal for running a fuel cell or custom tank. It features a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go Fuel in-tank pump modules--choose either a 255 lph or 340 lph in-tank pump. Both can be used on tanks with a depth of 6 to 15 in., and each has a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included.
( 1 )
$1,047.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
