Availability
Moeller Marine permanent fuel tanks feature robust polyethylene construction and include swivel pick-ups. They're available in a large selection of shapes, sizes, and capacities up to 150 gallons. Fuel your fun with Moeller Marine permanent fuel tanks. Tank specifications: * Machined aluminum 3/8 in. withdrawal fitting with 360 degree swivel pop lock for hook-up convenience * Ethanol and biodiesel corrosion- and pit-resistant * Complete with fill neck and withdrawal/vent fittings molded directly into the shell * ABYC-compliant fittings with seamless connections to rigid low-perm hoses * UV rating of 8 * Temperature rating of -40 to 176 degrees F * Suitable for either gasoline or diesel use with appropriate return kit * Hold-down grooves molded directly into tank shells for secure attachment with Moeller hold-down kits * Suitable as replacement tanks for boats built before 2011
( 14 )
$762.99
—
$1,168.99
Moeller Marine topside fuel tanks equal more capacity, so you can extend your fun on the lake without a trip to the gas pump! These barrier models range in capacity from 14 to 24 gallons and are EPA emissions-compliant for use in the US and Canada. Moeller barrier topside fuel tanks deliver quality, reliability, and durability to operate your boat with confidence. Features include: * Rotationally molded cross-linked polyethylene and UV-stabilized resin * Direct-sight gauge for convenient reading * EPA cap * Meets EPA permeation and emission requirements * Available in multiple sizes
Not Yet Reviewed
$825.99
—
$915.99
Holley 4160 marine carburetors include all of the same features as their street cousins--plus a few more that make them adaptable and legal for marine use. Primary differences include fuel bowl vent tubes, sealed throttle shafts, and universal marine calibration. Plus, they are designed to meet flooding and backfire requirements as defined by the U.S. Coast Guard. Other than that, they're typical Holley quality all the way, with a square bore flange, vacuum secondaries, single or dual fuel inlets, an electric or manual choke, 30cc accelerator pumps, and a 5 in. airhorn (unless noted otherwise). And last but not least, you can choose between universal or direct fit OE replacement versions.
( 10 )
$899.95
Quick Fuel M-Series carburetors launch high performance for your watercraft. QFT marine performance carburetors are specifically engineered for the positive and smooth fuel delivery that's vital to your power boat. M-Series carburetors all feature billet metering blocks for exceptional strength, interchangeable air bleeds, restrictions for fine tuning, and PTFE coated throttle shafts and bearings for smooth throttle response. Plus, they offer aluminum fuel bowls with integral sight glass windows, marine J-style vent tubes, and QuickLink secondary linkage for fast and easy changes in throttle opening rates. QFT applies a protective coating to the main carb body and fuel bowls to prevent corrosion in harsh marine environments. They are available in several cfm models, as well as a couple of special models calibrated for Roots-style 2 x 4 supercharged engines and large-displacement engines. Quick Fuel M-Series marine carburetors are hand-assembled and run-tested on real engines for precise fuel delivery and ultimate precision on the water.
( 2 )
$1,049.95
To ensure smooth, positive response from your watercraft fuel system, Quick Fuel Technology introduces Black Diamond Marine Series carburetors. The proper blend of air and fuel is critical when you're cruising miles from shore, and the innovative team at QFT has engineered carbs for every street and race application imaginable. Trust their expertise for your boat needs, as well. Depending on the Marine Series carburetor model selected, you can choose single or dual fuel inlets, vacuum or mechanical secondary, primary and secondary jet sizes, and inner and outer air bleed sizes. Quick Fuel Black Diamond Marine Series carburetors feature: * Aluminum fuel bowls with sight glass windows for quick float adjustment * Changeable idle air and high-speed bleeds * PTFE-coated throttle shafts with PTFE bearing ribbons and stainless steel plates * J tubes to prevent spillage * Black Diamond high-temperature satin coating on main body and fuel bowls for enhanced corrosion protection and appearance; coating also provides a 6 percent reduction in fuel temperature * 4-corner idle adjustment (except M-600) * Billet metering blocks with changeable primary idle feed and power valve channel restrictions (except M-600)
( 15 )
$999.95
Sierra Marine carburetors are new precision castings built to meet or exceed OEM specifications. They offer several 2- and 4-barrel replacement styles to choose from. Order the model recommended for your watercraft application. Features include: * Recalibrated to maximize fuel efficiency and performance * All carburetors are flow-tested throughout the entire throttle range * Fuel mixture and idle settings are preset to ensure that only minor idle and choke adjustments are necessary during installation
( 41 )
$758.99
—
$1,155.99
On Sale
Aeromotive Eliminator marine fuel pumps are "water warriors"! With 25 percent more flow than the A1000 model, they rid your race craft of poor performance by feeding your engine with enough fuel to maintain its winning ways. Eliminators are certified to ISO 8846, SAE J1171, and United States Coast Guard requirements for ignition protection and fire resistance. Plus, these marine pumps are built to survive over 2,000 hours of continuous run time. Battle the waters successfully with Aeromotive Eliminator marine fuel pumps on board. Other Eliminator marine features: * Compatible with all pump and racing gasoline * Up to 2300 hp--carbureted engine naturally aspirated * Up to 1700 hp--carbureted engine forced air induction * Up to 1900 hp--fuel injected engine naturally aspirated * Up to 1400 hp--fuel injected engine forced air induction
Not Yet Reviewed
$1,082.70
$974.43
Do you need to replace your marine carburetor? If so, then try one of our Summit Racing™ marine carburetor and flame arrestor Pro Packs to get the job done. They include an Edelbrock carburetor with an electric choke, a K&N stainless steel flame arrestor, and carburetor mounting studs. Change the performance and drivability of your boat with these Summit marine carburetor and flame arrestor Pro Packs.
( 2 )
$823.93
Summit Racing™ marine carburetor and fuel pump Pro Packs have taken the most popular combinations of square bore carburetors, fuel pumps, and fuel pressure regulators and put them together under one part number to save you time and money. Available with your choice of an Edelbrock or Holley carburetor, the Summit Racing™ marine carburetor and fuel pump Pro Packs are sure to improve your boat's performance.
Not Yet Reviewed
$853.90
You'll notice a definite difference in power with AED Marine Series carburetors. They're hand-built and calibrated for marine use to specifications for a balanced fuel curve. Featuring AED custom billet marine metering blocks, the carbs are test-run and blueprinted for maximum performance, right out of the box. You'll like the improved throttle response and crisp revs. If you're picky about how your boat runs (and looks), go with AED HO-Series.
Not Yet Reviewed
$759.95
Summit Bucks
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$779.95
AED HB-Series blower carburetors are designed specifically for roots-style blower applications. They feature billet metering blocks, boost referenced power valves, wet flow technology, fully machined conventional main bodies for additional signal strength and response providing exceptional acceleration. All AED HB-Series blower carburetors are blueprinted and tested for maximum performance right out of the box.
( 5 )
$759.95
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$899.95
—
$999.95
Designed with street and bracket racers in mind, AED HO-Series carburetors offer crisp throttle response, great drivability, and killer acceleration. These carbs feature CNC-machined and deburred main body surfaces, high-flow boosters and metering blocks, four corner idle, a milled choke horn, dual accelerator pumps and vacuum ports, and non-stick, reusable gaskets. All AED carburetors are tested and tuned before shipping, employing their state-of-the-art, planet-leading, computerized "wet-flow bench." They'll provide you with properly matched and balanced fuel delivery and a controlled metering signal and strength, no matter what your speed. HO-Series carburetors are available for aspirated engines, alcohol, blower, and marine applications. AED HO-Series carburetors unite "off-the-shelf" high performance with an affordable price.
( 67 )
$799.95
—
$974.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$838.95
Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor
Not Yet Reviewed
$949.95
—
$999.95
Holley Ford Hi-Ram carbureted intake manifold bases have a runner length and tapered cross section designed to perform well for a wide range of engine configurations. Holley's engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! Holley Hi-Ram specs: * Cast aluminum construction * Available in natural or black finish * Plenum top gasket type—3/32 in. round O-ring cord
( 2 )
$799.95
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$949.95
—
$999.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
Weldon DB2025-A electric fuel pumps offer flow rates to support 880 to 1,400 hp. These high performance pumps provide precise and consistent fuel delivery. The DB2025-A pumps work with both carbureted and fuel-injected engines. Features and specs include: * Self-priming * Pump element is 100 percent tool steel * Bodies are machined from billet aluminum * All billet body pumps are 100 percent serviceable * Breakaway couplings prevent pump/motor damage in the event of contamination * -12 inlet and -10 outlet O-ring ports * Weighs 5.5 lbs. * Fuel injected engines: 1,600 hp at 50 psi (naturally aspirated) 1,400 hp at 80 psi (boosted) * Carbureted engines: 1,800 hp at 7 psi (naturally aspirated) 1,700 hp at 30 psi (boosted) * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels
Not Yet Reviewed
$806.29
AED Super-Mod Series carburetors are custom-tailored for your specific application to keep you first off of the line. AED uses a specific set of parameters—engine size, rpm range, and power level—to calibrate venturi and metering sizing and properly size throttle bore and fuel circuits for maximum airflow, response, and power. AED Super-Mod Series throttle bores are fully CNC-ported, all corners are balanced, and the completed carburetors are then "wet-flow" tested to ensure top performance. Applying additional information that you provide, AED fine-tunes your selection for a custom fit for your machine. Whether you're a professional racer or an inspired amateur, AED will help you to obtain the proper carburetor to keep your runs successful.
Not Yet Reviewed
$979.99
—
$1,017.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
