Availability
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$971.95
—
$1,062.95
Your 6.2L LSA ZL1 is impressive. With Lingenfelter 630hp ZL1 engine packages, it will be very impressive! These upgrade packages enhance your supercharged engine with a substantial horsepower and torque improvement over the factory 580 hp and 556 ft./lb. of torque. And they do that while maintaining a safe level of boost and supercharger rpm. Packages include: * 2.55 in. diameter powdercoated 8-rib steel supercharger drive pulley * 8-rib serpentine belt * Lingenfelter LS9 solid supercharger isolator coupling * Lingenfelter high-flow air intake kit * 160 degree thermostat
Not Yet Reviewed
$848.30
Your 6.2L LSA CTS-V is impressive. Lingenfelter 630hp CTS-V engine packages will make it very impressive! These upgrade packages enhance your supercharged engine with a substantial horsepower and torque improvement over the factory 556 hp and 551 ft./lb. of torque. And they do that while maintaining a safe level of boost and supercharger rpm. Packages include: * 2.55 in. diameter powdercoated 8-rib steel supercharger drive pulley * 8-rib serpentine belt * Lingenfelter LS9 solid supercharger isolator coupling * Lingenfelter air intake duct * Air filter * 160 degree thermostat
Not Yet Reviewed
$759.95
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
—
$1,047.95
Designed for 1988-96 Ford trucks (under 8,600 GVW) with fuel-injected 5.8L V8 engines, the modular design of these Edelbrock manifolds incorporates the latest airflow technology for maximum torque gains in the mid range. Other features include a broad power range from idle to 5,500 rpm and a removable plenum cover that allows access to runners. The base manifold is CNC port-matched to the upper manifold for maximum power, and they accept all stock hardware. The upper is powdercoated light titanium gray, and the base is as-cast.
( 11 )
$1,132.95
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$1,022.95
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
—
$1,049.00
Prepare your pony for the street and strip! The Edelbrock Performer 5.0 RPM II manifolds are designed for 1986-95 5.0L Mustangs and have shown significant gains in horsepower over existing designs in the 1,500 to 6,500 rpm range. That makes these intakes ideally suited for street and strip applications. The manifolds consist of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. The upper manifold is powdercoated light titanium gray.
( 5 )
$990.95
—
$1,081.95
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$899.99
—
$959.00
What is your engine wearing? Dressing your Chevy engine with a genuine Chevrolet Performance intercooler water pump means getting the fit and function you know will produce the desired results. These durable fluid pump assemblies are quality-built to outfit your supercharged engine with effective cooling and efficient operation. For upgrade or replacement, maintain your engine's red carpet performance by choosing parts tailor-made to fit—a Chevrolet intercooler water pump.
( 1 )
$785.99
Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds utilize a proven short runner tunnel-ram style that provides that next level of performance you have been looking for. They are both direct stock replacements for OEM equipment with all required emissions features. The Edelbrock Performer RPM Air-Gap LT1/LT4 intake manifolds are manufactured from aluminum and feature a natural finish. Edelbrock's patended Air-Gap design delivers a cooler and denser air stream for maximum power output. They are designed to work with either stock, 52mm or 58mm Edelbrock throttle bodies, and will accept OEM fuel rails.
( 4 )
$822.95
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$865.95
These Ford Performance Parts 4.6L 3-valve performance intake manifolds feature high-flow runners and an open plenum design for maximum flow, while still fitting underneath stock Mustang hoods. They are manufactured from lightweight composite plastic and have been tested up to 20+ psi; perfect for use in forced induction applications. Ford Performance Parts 4.6L 3-valve performance intake manifolds include a set of intake gaskets to complete the installation. Additional technical information: * Works well with Ford Performance M-6550-3V hot rod camshafts, M-6049-N3VPA high performance CNC-ported 3V cylinder heads, and M-9926-3V 62mm throttle bodies * Less heat soak than aluminum intakes * MAP sensor mounting boss for speed-density applications * Calibration required (not included) * Throttle body not included * Does not fit with Ford Performance strut tower braces
( 11 )
$786.99
Ford Performance Parts 7.3L Super Duty low-profile intake manifolds offer better hood clearance with a straight-out inlet that will fit under an S550, and deliver an increase in horsepower and torque over the stock Godzilla manifold. Built with the latest technologies, the "plug-and-play" manifolds are easy swaps for stock units, they are lightweight, and safe for boost, nitrous, or pretty much any application. Ford Performance Parts 7.3L low-profile intake manifolds utilize the 92mm GT500 throttle body (not included) and custom calibration is required. They are topped with a removable, branded Ford performance plaque.
Not Yet Reviewed
$942.99
Edelbrock Performer RPM intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM aluminum intake manifold that is coated with Edelbrock's EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer RPM intake features larger plenums and runners for engines with a camshaft, exhaust, and other performance modifications. Ready for a change? Try these Edelbrock Performer RPM intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 4 )
$946.95
—
$1,101.95
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,032.95
—
$1,149.95
Performance Design Carbon HR intake manifold lids offer owners of the Holley Ram intake models a lightweight. carbon fiber plenum upper. These top sections reduce weight, reduce heat soak, and add a unique engine aesthetic with the exposed weave cloth. Constructed from high-strength carbon fiber with high-temperature epoxy and bonded with high-temperature aerospace structural adhesive, each unit saves approximately 3 lbs. of mass versus the cast original lid. With a matching bolt pattern, the carbon plenum uppers will bolt to any existing Holley Hi-Ram, Mid-Ram, or Lo-Ram cast lowers. The throttle is moved up and rear-ward to improve the flow transition into the plenum and facilitate the carbon process. Order the model designed for your application needs. Other product features and specifications include: * Billet throttle body flange (90-105mm) * Plenum can be reversed on the Holley Ram lower * Carbon fiber-wrapped foam core plenum flange
Not Yet Reviewed
$899.99
—
$949.99
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$811.95
—
$865.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$754.95
—
$919.95
Ford Performance Parts Hi-Flow throttle bodies provide more air and produce more power than stock throttle bodies, while also providing good drivability and low-speed control. Available in a variety of styles, number and size of venturis, materials and finishes, they are precision-machined to ensure consistency and accept all stock sensors and controls. Depending on application, features include: * All factory sensors installed; no need to tear apart your original throttle body * Calibrated for idle air flow using the same procedure as production throttle bodies * Consistent high flow * Great looks and underhood "bling" * Validation through hundreds of hours of dyno, racing, and street performance driving * All cfm ratings calibrated at 28 in. of water, measured on SuperFlow SF-1020 flow bench
( 22 )
$822.99
—
$869.99
Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 8 )
$909.30
—
$937.51
On Sale
Performance Design XS intake manifolds break the mold of existing intake manifold architecture to maximize available space under the hood. When designing the optimum intake runner length and shape, the fuel rail gets in the way—so they moved it—inside the intake manifold! Those billet fuel rails feature an external quick-disconnect near the stock location. Testing proved these models, featuring injection-molded, glass-reinforced nylon construction, made horsepower and torque gains on a stock engine—with increasing gains as the engine got more aggressive with camshaft and exhaust upgrades! Other product features and specifications include: * Modular runners with three staggered lengths for best performance * Forward-facing throttle body flanges (90-101mm, 103mm, and 112mm) * Full assembly can be reversed on the engine * Fits under the cowl hood of a C6 Chevy Corvette * Factory MAP sensor location * PCV and canister purge solenoid OEM connections * Accepts standard EV6 LS3/LS7-style injectors * Injector extension wires pass through sealed grommets * Maximum recommended boost is 20 psi * Carbon fiber center bolt cover * Includes stainless steel hardware for installation * Includes molded port, plenum, and throttle seals
Not Yet Reviewed
$999.99
$899.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
