Availability
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$780.85
—
$892.25
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$781.92
—
$886.71
Draw attention to your Type R's engine bay with a race-inspired aFe Takeda Black Series Momentum Carbon Fiber Pro 5R cold air intake system. With a massive air filter and dyno-tuned intake tube, it's sure to perform as good as it looks. Additional details: * Dyno-proven gains up to +14 hp and +16 lbs.-ft. torque * Outflows factory intake by 35 percent * Measured flow: 365 cfm @ 7 in. H2O * 100 percent twill weave carbon fiber construction * Sealed housing with opening allows for viewing of massive air filter, yet seals when hood is closed to keep out hot air * Innovative filter-to-housing interface for easy installation * Washable and reusable Pro 5R air filter for maximum performance * Large 5-Layer Performance Air Filter: Momentum's innovative filter-to-housing interface was built to feature the largest air filter possible. This 7 1/2 in. tall 360-degree radial flow air filter features aFe's pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. * Dyno-Tuned Intake Tube: A lightweight high-gloss twill weave carbon fiber tube directs filtered air from the air filter to the engine. It's computer designed and tested to increase airflow, while also reducing weight and enhancing the visual appearance of the engine bay. * Unique Computer-Designed Carbon Fiber Housing: The simple yet elegant one-piece sealed housing features aFe's patent pending filter-to-housing interface, making installation a snap. The housing is made from lightweight, high-gloss, clearcoated twill weave carbon fiber. It utilizes the OE air inlet location, as well as an auxiliary air inlet, for maximum airflow. * Hassle-Free Installation: 304 stainless-steel clamps and all couplings are included for strength and durability. A premium bellows coupling allows for ample flexibility, and features a 3/8 in. port for the crankcase tube. This system is designed with fewer parts and utilizes factory mounting locations, making it extremely simple to install.
Not Yet Reviewed
$973.35
Performance Design Carbon pTR intake manifold lids offer a replacement carbon fiber top for the Carbon pTR manifold, a custom project, or an upgrade. The plenum is constructed from high-strength carbon fiber with high-temperature epoxy for improved strength to weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the heads and houses all ports/sensors hidden in the valley. The combination of materials offers a 10 lb. weight savings over competitive aluminum tunnel ram manifolds. Select the pTR lid needed for your application. Specifications and features: * Carbon fiber plenum with five layers of carbon and foam core flange * Tested to over 50 psi of boost * Includes stainless steel hardware for installation * Anodized billet throttle flange available in red or black
Not Yet Reviewed
$899.99
On Sale
FUELAB Titanium fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank * 1/4 in.-28 hardware to mount to most fuel cell nut rings (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$925.00
—
$1,050.00
$832.50
—
$945.00
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$925.00
—
$1,050.00
$832.50
—
$945.00
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$949.95
$853.95
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$859.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
