Free Shipping on Orders Over $125 at Summit Racing

Advance Adapters Transfer Case Adapters

Advance Adapters transfer case adapters will save you a lot of time and headaches. They allow you to retain the stock location of your transfer case for a quicker, easier transmission swap. The adapters are made from high-quality materials for excellent durability.

4.56 out of 5 stars ( 95 )

$766.42

Billet Specialties LS Valve Cover Conversion Kits

Billet Specialties LS valve cover conversion kits add classic style to modern performance. These kits allow the use of perimeter-style small block or big block Chevrolet valve covers on your LS motor, while hiding the coils underneath for a clean, classic look. The cover conversions feature recessed wire channels to drop the wires where you need them for ease of installation. Order the kit recommended for your application. Features also include: * Precision-machined from 6061-T6 billet aluminum * Works with the large LS3 coils (AC Delco D514A) * Retains the factory LS gasket for a leak-free seal * Hidden oil fill cap—on each side for ease of access * Stainless steel hardware included

5.0 out of 5 stars ( 1 )

$756.95

Mile Marker H-Series Hydraulic Winch Valve Adapter Kits

These H-Series hydraulic winch valve adapter kits are required to operate your Mile Marker H-Series winch. These H-Series hydraulic winch valve adapter kits include the following: * 12 ft. lead remote control * Hoses and fittings * Power in and power out * Remote solenoid-activated control valve--draws only 2 amps * Adapter for vehicle-specific power steering pump--rated to 7 gpm

2.0 out of 5 stars ( 1 )

$799.00

Mile Marker 34 Series Hydraulic Winch Valve Adapter Kits

Mile Marker 34 Series hydraulic winch valve adapter kits offer non-stop recovery power driven by your power steering pump! Installing Mile Marker's H-Series winches on your rig requires one of their vehicle-specific 34 Series valve adapter kits. Their kits draw only 2 amps and include everything you need for continuous pulling power from the 12 ft. lead remote control to the hoses, fittings, and solenoid-activated control valve. Get your H-Series winch powered up with the 34 Series hydraulic winch valve adapter kits from Mile Marker!

4.0 out of 5 stars ( 1 )

$799.00

Trail-Gear Trail-Creeper Dual Transfer Case Adapters

Trail-Gear Trail-Creeper dual transfer case adapters deliver quality at the right price. They have greatly increased the oiling flow in and around the adapter for cooler operation; plus, they have increased the strength of the casting with thicker walls and huge oversized gussets. Trail-Creeper adapters utilize a special retainer ring--not a light gauge snap ring--to securely stabilize the main bearing and prevent bearing play. These features, along with tighter tolerances on the coupler, ensure long life and prevent stripped gears. Trail-Gear Trail-Creeper kits include: * Heavy-duty aluminum adapter plate * Heavy-duty coupler * Cage and main bearings installed * Replacement transmission output seal * Magnetic drain plug * Shift knob * Mounting hardware * Transfer case and transmission block-off plates

Not Yet Reviewed

$799.99

CURT Custom Tow Bar Base Plates

CURT custom tow bar base plates are designed to be vehicle-specific tow bar brackets—each model fits a unique make and model, ensuring a custom fit. The tow bar base plates feature an OE-style design to fully integrate with the front of vehicle frame and maintains a factory look. These custom tow bar base plates are constructed from high-quality steel and precisely welded for a perfect fit on your vehicle and are physically tested for absolute safety and peace of mind, while dinghy towing. They also feature a unique co-cured finish of liquid A-coat and highly durable powdercoat to protect against the outdoor elements. Select the tow bar base plate model recommended for towing your truck, Jeep, SUV, or car. Key features: * Engineered with a vehicle-specific design for a custom fit * Constructed from welded steel and physically tested for safe towing * Protected by a durable high-gloss black powder coat finish * Co-cured in a rust-resistant liquid A-coat, inside and out * Provides a solid connection for dinghy towing your vehicle with tow bars * Custom base plate comes with two attachment tabs for connecting the tow bar, as well as safety cables for securing to the vehicle frame * Brackets are hidden to help maintain an OEM look and feel on vehicle

5.0 out of 5 stars ( 1 )

$772.99

Advance Adapters LS Series Gen III Manual Transmission Conversion Kits

Hook up to your GM manual transmission with Advance Adapters Gen III/LS Series flywheel and clutch kits. These conversion kits contain custom clutch components designed to adapt the Gen III/LS Series to your GM manual transmission. The flywheel is specially designed for the included high performance LUK clutch components. Do you have a special conversion? Advance Adapters LS series Gen III manual transmission conversion kits make change easier. Features include * Custom flywheel * 11mm flywheel bolts * 11 in. pressure plate and disc * Pilot bushing spacer * Throwout bearing * 10mm bellhousing bolts * 10mm lockwashers * XRP dowel bolts

3.71 out of 5 stars ( 7 )

$888.00

QuickJack Motorcycle Lift Adapters

Quickjack motorcycle lift adapters turn your portable car lift into a portable motorcycle service lift. Simply slide the Quickjack frames together, rest the lightweight aluminum platform on top and secure the assembly with a single pass-through locking pin. The stylish cold-formed diamond tread platform is light, easy to transport and made from rugged TIG-welded 6061-T6 aluminum, providing maximum grip and an attractive finish.

Not Yet Reviewed

$999.99

J. W. Speaker 8693 Adaptive 2 LED Headlights

Master the road with the brilliant illumination of J. W. Speaker 8693 Adaptive 2 LED headlights. Built with Adaptive technology that eliminates dark corners on sharp turns, they feature a "halo" DRL/front position, Dual Burn high and low beam optics for an extra punch of light, and ComfortLite high beams for improved light output. The advanced electronics and embedded sensors calculate bank angles on a real-time basis, automatically directing a light array up or down in the foreground as the motorcycle leans. Together the optics and technology create a brighter and safer path for you and your bike to follow.

Not Yet Reviewed

$799.99

Summit Racing™ Pro LS Transmission Adapters

Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.

5.0 out of 5 stars ( 1 )

$949.99

ICT Billet Intake Manifold Adapters

ICT Billet intake manifold adapters mate cylinder heads to intake manifolds or supercharges. They are offered to adapt a variety of cylinder heads and intakes. The plates are made from aerospace-grade 6061 T-6 billet aluminum. The kits come with adapter plates and O-ring seals. Depending on the specific application, different length intake manifold bolts may be required (not included).

4.0 out of 5 stars ( 9 )

$839.99

ICT Billet Bellhousing Adapter Plate Kits

ICT Billet bellhousing adapter plate kits assist with connecting a Nissan transmission onto a GM LS engine with minimal modification. Available in two kits, each one is compatible with Nissan 350Z/G35 6-speed transmissions and use all standard F-Body LS T56 flywheel, pressure plate, and bellhousing components. Plates are made from aerospace-grade billet aluminum and will take the place of the front bearing cover on the transmission. ICT Billet bellhousing adapter plate kits allow transmission and clutch servicing without removing the engine in most applications, and each kit includes the bellhousing adapter plate, pilot bushing, clutch disk, alignment tool, and mounting hardware. Choose the kit designed for your generation transmission. Notes: * Standard T56 bellhousing will bolt to adapter plate * Modification to transmission entails cutting/removing OEM bellhousing and OEM front bearing cover from transmission to allow adapter plate installation * To verify transmission generation, measure input shaft bearing OUTSIDE DIAMETER: -- Generation 1 = 3.937 or 100mm -- Generation 2 = 3.543 or 90mm * Installer must verify bellhousing/adapter plate alignment is within .005 in. during installation to prevent bearing side-loading; offset dowels may be necessary to ensure proper alignment.

5.0 out of 5 stars ( 1 )

$899.99

OTC Revolver Engine Stand Adapter Plates

OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.

5.0 out of 5 stars ( 2 )

$806.99

Scott Drake T5 Transmission Conversion Plates

Scott Drake conversion plates will allow you to install a late model T5 transmission on to your early model vehicle using your factory style 6-bolt bellhousing. The adapter plate installs between the transmission and the early model bellhousing and comes with everything necessary to install it.

Not Yet Reviewed

$767.95

Advance Adapters GM LS Adapter Flywheels

Advance Adapters GM LS adapter flywheels are designed to bridge the gap between modern GM LS engines (Gen III/IV) and older GM or popular aftermarket manual transmissions. These specialized replacements feature a unique offset and bolt pattern to accommodate the LS crank's depth, ensuring full clutch disc engagement for conversions in Jeeps, trucks, and classic vehicles where you want an LS engine with a manual stick shift. Additional details: * Corrects crank depth: LS engines have a crankshaft that sits slightly further in than older small blocks, so these flywheels are thicker (or designed to offset) to position the clutch disc correctly for proper input shaft engagement * Specific bolt patterns: They feature the correct bolt pattern for the LS engine's crank and are designed for specific pressure plates, often for 11 in. clutches * Internal balancing: LS engines are internally balanced, which is different from older externally balanced V8s, so the flywheel itself is designed for the LS platform * Lightweight and strong: Made from billet steel, designed for durability and sometimes relieved to maintain a specific weight * Why you need one: When putting an LS engine into an older vehicle or swapping from an automatic to a manual transmission, you can't just use a standard flywheel. You need an Advance Adapters flywheel to make the clutch system function correctly and fully engage the transmission's input shaft.

Not Yet Reviewed

$763.68

OTC Powertrain Lift Differential Adapters

OTC powertrain lift differential adapters mount to your OTC 5295 powertrain lift table for proper handling of differential axle assemblies during service. Two axle tube stands support each side of the axle housing while the highly-versatile pinion adapter's reversible head stabilizes the differential by not allowing it to rotate. All OTC powertrain lift differential adapters feature height adjustability and hook points for attaching hold-down straps to keep your axle assembly firmly positioned. Product features, items, and specs include: * Capacity of 800 lbs. * (2) Axle housing stand assemblies * Pinion stand assembly * (12) Hex head cap screws * Hold-down safety strap * Axle housing stands height range is 7 in. to 9 1/4 in. * Pinion support height range is 6 1/2 in. to 10 1/2 in.

Not Yet Reviewed

$999.99

RainGear Hidden Wiper Systems

RainGear offers hidden wiper systems—modern, high-quality replacements for your old system. They're the only replacement wiper system that is completely hidden, fitting entirely within the air box in the cowl, which allows you to remove the stock wiper motor. The wiper motor hole in the firewall can be covered up with the supplied cover plate in these kits, or you can weld-in a patch panel to eliminate the hole entirely—giving you options! These assemblies are perfect for Pro Street cars, or if you just desire a clean looking firewall. RainGear kits include a wiring harness, windshield wiper motor, switch, adapter plate, and the mounting hardware. Order the model designed for your specific vehicle.

5.0 out of 5 stars ( 4 )

$751.99

—

$981.99

Allstar Performance LS Timing Cover Conversion Kits

Allstar Performance LS timing cover conversion kits adapt a standard small block Ford distributor into CT525 crate and LS Series engines, allowing timing adjustment and ability to change mechanical advance curve. This also provides an alternative to installing complete computer and fuel injection systems when swapping a late model LS engine into an older street performance vehicle. Enjoy the performance and durability of the GM LS Series engine with the simplicity and tune-ability of a distributor and carburetor. The Allstar kits include all internal components and new timing cover for converting LS Series engines to utilize a standard distributor ignition system and a carburetor with a belt-driven or electric fuel pump.

5.0 out of 5 stars ( 1 )

$819.99

OTC Transmission Support Brackets

OTC's automatic transmission adapters are the perfect solution for those hard-to-install transmissions. They're made from durable materials to ensure performance.

5.0 out of 5 stars ( 1 )

$891.99

H&R Sport Springs

Suspension is one of the most important factors in determining your vehicle's day-to-day drivability, and the first step in suspension tuning is to upgrade your vehicle's stock springs. H&R Sport springs are high-quality units that will not set or sag, and are designed and manufactured to be strong, resilient, and durable. H&R's Sport spring kits streamline the look of your vehicle with a reduced fender well gap, as well as lower your vehicle's center of gravity, reducing body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. Additional features: * Crafted from a special (hf) 54SiCr6 spring steel to ensure premium quality and performance * Shot-peened to increase their life by more than 200 percent * Each spring is 100 percent tested * All production is completed in-house, so product quality is ensured * H&R's ISO9001 certified production facility in Germany

5.0 out of 5 stars ( 2 )

$798.99

—

$998.99

Wilson Manifolds High-Flow Elbows

Wilson Manifolds' lightweight, 100 degree elbows provide the most efficient method of adapting their high-flow, single-bore throttle bodies to 4150 or 4500 series intake manifolds. Wilson Manifolds' elbows incorporate a computer-optimized transition from the throttle body to the intake manifold plenum for maximum airflow and distribution. Wilson Manifolds' elbows are CNC-machined to match each throttle body size.

Not Yet Reviewed

$875.00

—

$987.50

Nitrous Express EFI Single Nozzle Nitrous Systems

It used to be that big horsepower increases required major internal engine modifications. However, Nitrous Express has a way that's a whole lot easier--and cheaper. Just bolting one of their EFI single nozzle nitrous systems onto your domestic or import can add from 35 to 150 hp to a V8, with intermediate choices of 50, 75, and 100 hp (with a maximum of 75 hp for fours and sixes.) These systems rely on a Nitrous Express Shark performance nozzle and will work with standard fuel pumps, without any timing retard. The kits include the nitrous bottle, nozzle, hoses, solenoids, wiring, and mounting hardware.

5.0 out of 5 stars ( 2 )

$781.77

—

$905.00

Body Parts Headlight Assemblies

Are you in search of quality OEM replacement headlight assemblies to get your ride back on the road? Body Part headlight assemblies are direct fit, easy-to-install reproductions made from quality materials. They're designed to replace old or damaged parts and are perfect for collision repair or restoration projects. Body Parts headlight assemblies are made for specific applications, and will help make your car, truck, or van look like it just rolled off the assembly line. Order the model designed for fitment on your ride.

4.65 out of 5 stars ( 106 )

$773.99

—

$995.99

VacuumMate Allweather Carburetor Synchronizer Tools

VacuumMate Allweather carburetor synchronizer tools are an electronic device for accurately synchronizing multiple carburetors or fuel injection throttle valves on engines, especially for outdoor and marine use. They use electronic pressure transducers instead of traditional mercury gauges, include a built-in tachometer, and feature four bright LED displays that are readable in sunlight. Their "Allweather" design makes the tools suitable for harsh conditions, and the "DYN" mode aids in diagnosing problems that prevent proper synchronization. Key features: * Engine synchronization: Precisely synchronizes up to four carburetors or fuel injection throttle valves on 2- and 4-stroke engines. * All-weather design: Features a rugged, water-resistant casing and bright, LED displays that are clear even in sunlight, making it ideal for outdoor and marine use. * Electronic sensors: Uses four industrial/medical-grade pressure transducers, which are less susceptible to mechanical shock and self-calibrate for atmospheric pressure changes. * Built-in tachometer: Displays engine speed in RPM, assisting with synchronization adjustments. * Diagnostic mode: The "DYN" (Dynamic) mode helps troubleshoot issues like a leaking valve that would prevent proper synchronization. * Expandable: Can be expanded to six cylinders with an optional adapter. * The TS-71 model kit includes a rechargeable internal battery for portable use, providing about six hours of autonomy; plus flexible, durable hoses and adapters for easy connection to various manifold configurations.

Not Yet Reviewed

$899.95

243 Results Found For "adapter"