Availability
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,049.95
—
$1,099.95
$943.95
—
$988.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$949.95
—
$1,016.95
$853.95
—
$914.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$949.95
$763.95
—
$899.95
On Sale
Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.
( 7 )
$1,099.95
$988.95
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$927.95
$834.95
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
$844.95
Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor
Not Yet Reviewed
$949.95
—
$999.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
—
$949.95
$799.95
—
$853.95
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,449.95
—
$1,549.95
$797.95
—
$1,007.95
On Sale
Holley modular Ultra Lo-Ram intake manifold kits feature a design custom-made for LS engines equipped with LS cathedral port cylinder heads, as well as OEM or aftermarket models. They provide an ideal solution for forced-induction (supercharged or turbocharged) engine applications and select throttle bodies—plus the base intake manifold features a lower overall height to fit under a stock or mildly modified hood. The included fuel rail kits come with two sets of brackets: a set for long (usually standard length) fuel injectors and a set for short (such as Pico or LS7) fuel injectors. The Holley LS modular Ultra Lo-Ram EFI intake manifolds best suited for your application also allow the use of front-feed plenum entry. More product features, items, and notes include: * Designed for forced-induction engine applications with peak power at 7,000 to 8,000 rpm (depending on the application) * Intake design facilitates custom inlet duct and throttle body placement * Allows design and fabrication of special throttle body adapters or inlet ducts for custom installations * Different finishes available for the best look to match your ride * Mounting hardware * With forced induction and the short runner length, the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger you use
Not Yet Reviewed
$999.95
—
$1,049.95
$898.95
—
$943.95
On Sale
Holley EFI Coyote Hi-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on Ford Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finishes, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20 percent more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration. Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup * Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds
( 1 )
$899.95
—
$927.95
$799.95
—
$834.95
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$949.95
—
$1,049.95
$853.95
—
$943.95
On Sale
Holley introduces a new addition to their manifold line up—the SBF Hi-Ram EFI intake manifolds that come with an LS throttle body flange top (in either 95mm or 105mm throttle body sizes). Their runner length and tapered cross-section design will perform well for a wide range of engine configurations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. With the aggressive, bold, race-bred styling, there's no doubt that these Hi-Ram EFI manifolds will make your bad intentions clear for drag racing, muscle car, marine, off-road, sandrails, pulling trucks, competition track, street rod applications, and more! Additional features and specs include: * Cast aluminum construction * Available in natural cast aluminum or black powdercoat finish * Manifold is designed for an 8.2 in. SBF deck height * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * A low-profile distributor will be needed when using this manifold (sold separately)
( 5 )
$1,249.95
$812.95
On Sale
Holley LS Modular Hi-Ram intake manifold bases could be the foundation for your custom induction system. Aggressive looks and bold styling make your bad intentions clear, whether you're drag racing, truck pulling, or making waves in your boat when you start with one of these Hi-Ram bases. Their modular design allows them to accept a wide range of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. When there's no limit on height, start your build with one of Holley's cost-effective LS Modular Hi-Ram intake manifold bases.
( 2 )
$775.95
—
$799.95
Put your LS on the high road to performance with Holley LS modular Hi-Ram carbureted intake systems. Aggressive, bold, race-bred styling with the potential for outstanding performance makes these intakes perfect for creating your custom induction system. They are cost-effective and constructed from cast aluminum with runner lengths and tapered cross-sections designed to perform well with a wide range of engine configurations. If you don't have hood restrictions, the coolest look with the hottest power possibilities is available with Holley LS modular Hi-Ram carbureted intake systems--and they won't burn your budget, either!
Not Yet Reviewed
$999.95
On Sale
Get your LS on the high road to performance with Holley modular Hi-Ram EFI intake systems. Aggressive, bold, race-bred styling makes these Hi-Ram intake systems perfect for creating your custom induction system. These cost-effective Holley systems are constructed from cast aluminum with runner lengths and tapered cross-sections designed to perform well with a wide range of engine configurations. If you don't have hood restrictions, the coolest look with the hottest power possibilities is available with Holley LS modular Hi-Ram EFI intake systems--and they hurt your budget either!
Not Yet Reviewed
$899.95
$808.95
—
$999.95
On Sale
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$999.95
$898.95
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$849.95
—
$949.95
$763.95
—
$853.95
On Sale
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$899.95
—
$999.95
$808.95
—
$898.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$899.95
—
$1,099.95
$849.95
—
$949.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$899.95
—
$999.95
$849.95
On Sale
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,449.95
$797.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
