Free Shipping on Orders Over $109 at Summit Racing

Ballenger AFR500v3 Wideband Control Kits

Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications

Not Yet Reviewed

$549.99

Ballenger AFR500CANv3 Wideband Monitor Kits

Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output

Not Yet Reviewed

$639.98

FAST Wireless Air/Fuel Meter Kits

FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.

4.75 out of 5 stars ( 4 )

$734.95

Haltech Dual Channel CAN O2 Wideband Controller Kits

Haltech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.

Not Yet Reviewed

$550.00

On Sale

MSD Power Grid Dual NTK Wideband O2 Modules

MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units that monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with MSD's Power Grid system controller (sold separately). They come with an extension harness, the sensors, connectors, and other parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)

1.0 out of 5 stars ( 1 )

$819.95

$736.95

Racepak AF1 Single Channel Air Fuel Sensor Packages

Racepak's AF1 single channel air fuel sensor packages are designed to be utilized with any of their V-net (canbus) Series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 V enables use with standard 12 or 16 V high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat- and water-resistant controller with integrated V-net module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0 to 5 V analog output

Not Yet Reviewed

$511.95

Innovate LM-2 Digital Air/Fuel Ratio Meters

Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC

4.09 out of 5 stars ( 11 )

$551.99

FuelTech WB-O2 Sensors

Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.

Not Yet Reviewed

$699.00

Altronics O2 Alert Warning and Recording Systems

Altronics O2 Alert warning and recording systems are specifically designed to record air/fuel ratios with a warning output. Not only do they record up to two wideband oxygen sensors, they also record engine rpm and have a programmable warning output to protect against detonation. The systems feature a backlit display, one wideband O2 sensor, a warning output, and software. The warning output can be used to activate a warning light, enable fuel enrichment, shut down nitrous, or retard timing. Recording can be started by a preset rpm value or switch, and can be played back on the systems or downloaded and graphed to a PC.

1.0 out of 5 stars ( 1 )

$719.99

Classic Instruments Velocity Series Gauges

Pick up the pace with Classic Instruments Velocity Series gauges. They feature big, easy-to-read numerals; a variety of bezels, pointer styles and colors; full-sweep and short-sweep faces; and your choice of black or white backgrounds—all with track-proven precision. LED illumination provides superior visibility at night and the included wiring harness makes installation easy. Classic Velocity gauges offer street rod builders accuracy and reliability, but they're also engineered to take the abuse of competition. You can choose to outfit your vehicle from a wide range of gauges, including boost and amp gauges, transmission and oil temperature gauges, or even a clock.

4.0 out of 5 stars ( 1 )

$511.95

Haltech Elite 2000/2500 GM Gen III LS1/LS6 DBW Retrofit ReadyTerrminated Harness

Haltech's Elite 2000/2500 GM Gen III LS1/LS6 DBW Retrofit Ready terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * The quick start guide will walk you through installation * The guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. * Suits: Retrofit of a GEN IV LS2/3 DBW throttle body. Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.

Not Yet Reviewed

$670.00

Innovate LM-2 Dual Digital Air/Fuel Ratio Meter Basic Kits

Innovate LM-2 dual digital air/fuel ratio meter basic kits feature the LM-2 that combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Innovate basic kits include the accessories to display your air/fuel ratio, either on the meter and/or on your PC. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * Dual Channel A/F version * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC Innovate dual basic kits include: * LM-2 meter * Bosch wide-band oxygen sensors * 8 ft. sensor cables * Cigarette lighter power adapter * USB cable for PC connection * Weld-in bung and plug kits * Manual

2.0 out of 5 stars ( 1 )

$671.99

Haltech Elite 2000/2500 GM Gen III LS1/LS6 Non-DBW Terminated Harness

Haltech's Elite 2000/2500 GM Gen III LS1/LS6 Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * The quick start guide will walk you through installation * The guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Fully programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. * Suits: Factory EV1 injector connectors and common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 wideband controller ready (controller and sensors not included) * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040090) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.

Not Yet Reviewed

$670.00

Denso Air/Fuel Ratio Sensors

Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time

4.78 out of 5 stars ( 23 )

$501.99

—

$632.99

Nitrous Express Maximizer 6 Progressive Nitrous Controllers

The Maximizer 6 progressive nitrous controller from NX offer many safety features that help you push your tune-up further while protecting your engine from damage. The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, rpm, mph, throttle percentage or boost pressure. Whether your engine is naturally aspirated or forced induction, gasoline or diesel, the Maximizer 6 progressive nitrous controllers from Nitrous Express are wise choice! Features of Maximizer 6 progressive nitrous controller: * Safety features—the Max 6 monitors throttle percentage, engine rpms, nitrous PSI, boost or pan vacuum, as well as three other user defined sensors to ensure that your engine is in the correct state to accept nitrous * If the Max 6 detects any condition that is outside the safe range, the Max 6 will shut down or pull back nitrous flow to help protect your engine from damage * Display and Programming options—the Max 6 is normally setup and tuned via a simple to use windows based laptop program (an optional 4 in. touch screen display can be connected to view and adjust common tuning parameters on the fly without the need for a laptop and is sold separately) * Data Logging—the Max 6 automatically data logs all inputs (including 3 user defined inputs) so you can review important data for multiple previous runs * The Max 6 includes enough internal memory to store over 100 quarter mile runs before you need to save them to a laptop * Hardware features—the Max 6 includes internal drivers for stage one and stage two that handle 70 amps each or 140 amps in single stage mode (Stages 3 and 4 require external drivers which are available separately) The Max 6 has multiple progression options to cover a variety of racing types—these progression options are described below: -- Time based progression: A popular choice for drag racing applications where you always start from a dead stop (this option is very easy to fine tune so that you leave soft enough to eliminate wheel spin, and increases power as you go down track, the controller smoothly adds more nitrous as traction increases) -- RPM based progression: Works great for vehicles that have enough traction to handle full nitrous power at the top of first gear (this mode allows you to add a little nitrous in the lower engine RPMs and ramp into full nitrous as the engine rpm increases) -- MPH (Miles Per Hour) progression: Great for racers who sometimes begin racing from a dead stop and other times begin racing from a rolling start (the nitrous controller will automatically limit nitrous to a smaller boost at low speeds where traction is limited, while providing a larger boost at higher speeds where traction is more plentiful) Bracket racers can use this feature to set MPH nitrous cutoff for the ultimate in consistent ETs -- Throttle percentage progression: Very beneficial to road race and drifting vehicles (the throttle percentage feature is also beneficial for street cars because it allows you to introduce a small amount of nitrous at mid throttle while smoothly transitioning to full nitrous power as you press the throttle to the floor -- Boost based progression: Very useful option for turbocharged diesels and gasoline applications—the boost progression allows nitrous to come on strong to eliminate that dreaded turbo lag, then ramps out the nitrous smoothly to let the mighty turbo do its thing (the end result is monster power with zero lag, even with a huge turbo) On diesel applications it will not allow full nitrous delivery until engine starts to build adequate boost, preventing a nitrous engine stall -- AFR (Air Fuel Ratio) compensation and protection: The Max 6 monitors the engines Air Fuel Ratio (from aftermarket wide band O2 module), and automatically adjusts the fuel and nitrous solenoid output to achieve the desired Air Fuel Ratio (target AFR is user adjustable)

5.0 out of 5 stars ( 1 )

$617.27

On Sale

Racepak IQ3 Dash Displays

Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.

4.67 out of 5 stars ( 6 )

$767.95

$690.95

FiTech Ultimate LS Standalone ECUs

FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.

3.8 out of 5 stars ( 51 )

$567.00

Longacre Dual Air Fuel Ratio Gauges

Achieve peak engine performance with a Longacre dual air/fuel ratio gauge, a cutting-edge solution designed for precision and reliability. These compact 2 5/8 in. face, all-in-one gauges take the guesswork out of carburetor tuning—providing real-time, accurate data for optimal results. Perfect for professional racers and enthusiasts alike, the gauges deliver unmatched functionality to help you fine-tune with confidence. Each gauge comes with oxygen bungs, sensors, and a wiring harness. Key features: * Real-time air/fuel ratio readings: Monitor your engine's air/fuel balance instantly to optimize performance * Dual Bank Monitoring: Simultaneously measure both left and right banks for a complete diagnostic overview * Accurate tuning support: Dial in jetting with confidence, armed with precise, reliable data * Built-in tachometer: Keep track of RPMs without additional equipment * Replay functionality: Review RPM and air/fuel data to identify and fine-tune critical areas * Space-saving design: Compact and sleek, it replaces standard small tachometers with ease * Why choose the dual air/fuel ratio gauge? -- Simplifies the tuning process with real-time, actionable insights -- Compact 2 5/8 in. design seamlessly integrates into any gauge panel -- Perfect for racers, mechanics, and DIY enthusiasts Popular applications: -- Dirt Late Model -- Dirt Modified -- Drag Racing -- Road Course -- Asphalt Oval Track

Not Yet Reviewed

$734.99

18 Results Found For "wideband"