Free Shipping on Orders Over $125 at Summit Racing

Wildside Composites Carbon Fiber Sheets

Wildside Composites carbon fiber sheets have several uses—from interior/exterior accent customization to entire body panel builds and more. Cosmetically appealing without paint, their natural corrosion resistance make them ideal for nearly anything you can dream up. These sheets are available in several unique configurations, such as silver aluminized fiberglass with silver carbon fiber; a combination of fiberglass backing/core mat center/black carbon fiber front; all shiny black carbon fiber; etc. They also offer a considerable variety of sizes and thicknesses. The only limit is your imagination when it comes to Wildside Composites carbon fiber sheets.

2.5 out of 5 stars ( 2 )

$542.68

—

$645.15

Mittler Brothers Shrinker/Stretcher with Foot Operation Stand

Mittler Brothers' shrinker/stretcher with foot operation stand leaves your hands free to move the metal. These quality-built sheetmetal tools allow you to work the metal to the perfect angle. Shrink metal for inside angles, and stretch it for outside angles easily, using your hands and feet with Mittler Brothers foot-operated shrinker/stretcher shop machines. Maximum capacities: * 16 gauge (.059 in.) Mild Steel * 14 gauge (.064 in.) Aluminum * 19 gauge (.043 in.) Stainless

4.0 out of 5 stars ( 5 )

$731.40

Woodward Fab Slip Rollers

When it comes to fabricating sheet metal parts for your project, you need quality tools that perform with accuracy. Woodward Fab has been providing metalworking tools since 1966, so they know a thing or two about quality. These slip rollers have a heavy cast iron frame, solid precision-ground rollers (not tubing), hardened steel gears, and a quick-release top roll.

4.65 out of 5 stars ( 26 )

$583.99

Mittler Brothers Standard Power Kits

Mittler Brothers standard power kits assist your shrinkers and stretchers, so you can work easier and with more control. The rugged construction of these units allows you to use the traditional hand-operated shrinkers/stretchers by pneumatic operation, via the included foot pedals. That means your hands stay on your project for maximum working efficiency. The cylinders feature quick-release pins for fast changeovers.

Not Yet Reviewed

$506.00

Mittler Brothers Punch and Flare Tool Sets

Mittler Brothers punch and flare tool sets are designed to give your sheet metal a unique, clean look. Just drill a pilot hole for the draw bolt and then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. They can also be used as a hole punch, simply by using the punch and die. These sets can be used on aluminum material with a thickness of 0.040 in. to 0.062 in., mild steel with a thickness of 0.040 in. to 0.062 in., and stainless steel with a 0.040 in. thickness.

4.94 out of 5 stars ( 18 )

$662.40

FAST LS Cathedral Port Sheet Metal Intake Manifolds

FAST LS cathedral port sheet metal intake manifolds provide race-developed technology for the street. They offer great aesthetics often associated with high-budget race engines. These fabricated manifolds are the perfect way to complete your engine—from each high-strength and durable TIG weld to the clean sheet metal bends and contoured runners. They don't just look good; they will help your engine achieve peak potential. Features of FAST LS cathedral port sheet metal intake manifolds include: * Black anodizing with a textured finish * Scalloped fuel rails further set this intake apart * Excellent performance in high-rpm naturally aspirated engines, as well as boosted applications * Big plenum, short runner design optimal performance * High-quality, durable construction ensures great fitment and reliability * 3mm thick aluminum construction resists flexing * Tested to over 25 psi of boost * Includes billet aluminum fuel rails, fittings, hardware, and gaskets

Not Yet Reviewed

$649.95

Black Horse Off-Road Heavy-Duty Sheet Metal Fender Flares

Swap out your plastic fender flares for something better--Black Horse Off-Road heavy-duty sheet metal fender flares. Constructed from 11-gauge high-quality steel and powdercoated for added durability, these wide, aggressive looking fender flares will keep dirt and debris off your vehicle. They mount to the OE fender flare locations with the included black steel fasteners. Black Horse Off-Road heavy-duty sheet metal fender flares are available in two styles, and can be purchased in pairs for front or rear, or in a set of four to cover front and rear. Protect your vehicle with something more than plastic; choose the fender flares designed for your vehicle.

Not Yet Reviewed

$624.15

—

$695.48

Zirgo UltraMat Heat and Sound Barrier Mats

Zirgo UltraMat heat and sound barrier mats reduce road noise while reflecting heat at the same time. The micro-ceramic and infrared reflectant resin compounds utilize the dynamics of thermal radiance in your favor to reflect infrared energy—keeping you warmer in the winter and cooler in the summer. The air gap deadens sound vibrations for a much more relaxing ride that's easier on the ears, too!

2.0 out of 5 stars ( 1 )

$539.95

—

$657.95

Body Parts Radiator Supports

Body Parts radiator supports are aftermarket replacement products for your old or damaged factory units. Keep your radiator secure and your cooling system in tip-top shape with their steel supports parts. An affordable solution for your replacement needs.

4.0 out of 5 stars ( 79 )

$530.99

—

$642.99

BluePrint Engines EFI Fabricated Intake Manifolds

BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders

3.0 out of 5 stars ( 1 )

$599.99

Doug's Headers

Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 726 )

$528.73

—

$742.30

Real Deal Steel Recessed Smoothie Steel Firewalls

Real Deal Steel brings you 16-gauge recessed Smoothie steel firewalls from Hot Rod Dynamics—panels developed to help you create a custom, fluid look under your hood. Factory firewalls are often full of holes and dings, and have a seam running through them that will cause cracks if not covered with metal. RDS upgrade panels are weld-in pieces that can be installed by anyone with basic sheet metal fabrication and welding skills. Thicker than stock for rigidity, they install overtop of the factory firewalls, and feature a deep 4 in. recess for all big block and LS engine installations. Their rounded recessed corners look better in a classic vehicle than square corner firewalls on the market, and they allow the use of Vintage Air Gen IV A/C systems and Raingear wiper systems. They truly are the Real Deal!

5.0 out of 5 stars ( 1 )

$688.99

United Pacific 1939-40 Ford Passenger Car Floor Panels

United Pacific 1939-40 Ford passenger car floor panels are excellent stamped 19-gauge sheet metal reproductions with all the original contour details. They feature spot welded bow-tie style brackets with four caged 3/8 in.-24 nuts for seat rail mounting. United Pacific 1939-40 Ford floor pans are coated in weldable primer.

Not Yet Reviewed

$540.99

ICEngineworks 1875 Series Basic Kits

ICEngineworks 1875 Series basic kits make your dreams of the perfect fitting headers a reality. Mocking up exhaust headers—simple or complicated—has mostly been a chore not eagerly undertaken, and would usually be followed up with a "good enough" attitude. No longer. ICEngineworks 1875 basic kits simple but highly effective 3D modeling block systems for precision exhaust headers. You can revise, correct, and rearrange without spending all your money and time reaching perfection. These tough ABS plastic modeling blocks are precision-molded and can be used over and over. ICEngineworks 1875 Series basic kits provide you with enough model blocks, plus adapters, an instruction manual, control sheets, and a storage case to get you started.

Not Yet Reviewed

$549.99

OER Authorized Complete Door Shells

If your restoration project entails completely replacing the vehicle doors, you're in luck! OER offers these OER Authorized complete door shells for a variety of popular applications and they're just what you need when replacing just the outer sheet metal panel won't do. OER Authorized complete door shells include the outer door shell and inner structure, complete and ready to install! Their correct outer sheet metal panel is ready to prep and paint, while the accurate inner structure allows the original door components to reinstall correctly. Simply remove the factory door components and reinstall them on the new door. It's that easy--a restorer's dream come true!

4.0 out of 5 stars ( 9 )

$609.99

—

$639.99

Scott Drake Floor Pans

Replace you're rusted out trunk floor pan with reproduction Scott Drake Floor Pans. Original gauge sheet metal is used in manufacturing these beautiful parts. Made to exact specifications for a perfect fit. Some applications may require modifications.

4.14 out of 5 stars ( 14 )

$585.95

—

$587.95

On Sale

Holley G-Body Fuel System Kits

Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit

4.5 out of 5 stars ( 2 )

$767.95

$690.95

Eddie Motorsports Door Sill Plates

Eddie Motorsports door sill plates are completely precision-machined from a solid piece of aluminum. You read that right--Eddie didn't quickly machine or bend a thin sheet to produce them! Durability is a key with any car sill plate, as you are climbing over them each time you get in or out of the vehicle. These essential trim items are available in multiple finishes to complement your vehicle's interior.

3.88 out of 5 stars ( 8 )

$503.95

—

$534.95

Sikky Manufacturing LSX Swap Oil Pans

Sikky Manufacturing LSX swap oil pans are made to help simplify your LS swap conversion. These pans are built with a 1/2 in. thick 6061 billet aluminum flange and back plate to provide superior strength that will outlast and outperform other pans available. The 100 percent aluminum design allows Sikky oil pans to be lightweight and extremely durable, unlike flimsy steel sheet metal pans. All pans are tested under rigorous track conditions to ensure that customers are provided with only the highest quality parts for their LS swap. The LSX swap pans are available in a variety of styles—such as front sump and mid-sump—for recommended fitment on specific applications. Most kits include the oil pan, magnetic drain plug, and hardware kit (some factory hardware is utilized).

2.0 out of 5 stars ( 1 )

$531.99

—

$745.34

HushMat Floor Kits

HushMat floor kits are created to reduce thermal transfer into your interior that comes from the engine, headers, exhaust, and catalytic converter. HushMat's proprietary USA-manufactured visco-elastic chemistry dissipates heat insulating your interior, causing less load on your air conditioning system to make your vehicle significantly cooler and more comfortable. Additional features and benefits include: * HushMat butyl sheets are available in stealth black or silver * Self-adhesive peel-and-stick installation (no glue required, no alcohol or acetone wash needed; no installation tools required) * Universal application (can be applied to firewall, floor pan, tunnel, doors, roof, rear wheel wells, trunk, and quarter panels) * Reduces heat and thermal transfer by over 40 percent * Lightweight and super-flexible (less than 1/8 in. thick and 0.47 lbs. per sq. ft.) * Trims easily with standard razor knife or household scissors * Stay warmer in the winter and cooler in the summer (insulates from -30 degrees up to 550+ degrees F) * Reduces road noise and vibration (low-frequency noise from 0 to 1,000 Hz) * OEM approved * Installs in half the time vs. other brands

4.65 out of 5 stars ( 23 )

$508.48

—

$707.32

On Sale

Holley Sniper EFI Fabricated Intakes

Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.

3.71 out of 5 stars ( 17 )

$805.95

—

$849.95

$566.61

—

$736.95

RESTOPARTS® Manufactured Door Shells

If your door is beyond repair, these RESTOPARTS® Manufactured door shells are the solution you've been looking for. These units are full-replacement doors that include the outer door skin welded to the inner door sheet metal, just like GM did years ago. The door shells are EDP (electro deposit plating)-coated, making them impervious to rust and other forms of corrosion, and are ready to bolt directly onto your existing hinges. They do not include glass, the window regulator assembly, or inner door latching mechanism.

1.0 out of 5 stars ( 2 )

$609.99

—

$708.99

Baileigh Industrial BR18E Adjustable Height Bead Roll Tables

One of the biggest segments in metal art is making custom designs with a bead roller in sheet metal panels. But keeping your material flat has always been a problem, until now. The Baileigh Industrial BR18E adjustable height bead roller tables solve that by giving the operator a stable place to rest and guide their project. They can be easily attached without the need to tap and drill holes into the base of the machine, and once installed you can still change the tooling, plus table height is adjustable up and down to accommodate different diameter tooling.

Not Yet Reviewed

$529.20

On Sale

Holley Sniper Carbureted Fabricated Intake Manifolds

Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo

2.25 out of 5 stars ( 40 )

$912.95

$515.07

—

$707.99

55 Results Found For "sheet"