Free Shipping on Orders Over $125 at Summit Racing

Racepak AF1 Single Channel Air Fuel Sensor Packages

Racepak's AF1 single channel air fuel sensor packages are designed to be utilized with any of their V-net (canbus) Series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 V enables use with standard 12 or 16 V high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat- and water-resistant controller with integrated V-net module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0 to 5 V analog output

Not Yet Reviewed

$511.95

Ballenger AFR500v3 Wideband Control Kits

Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications

Not Yet Reviewed

$549.99

FAST Wireless Air/Fuel Meter Kits

FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.

4.75 out of 5 stars ( 4 )

$551.95

—

$734.95

Ballenger AFR500CANv3 Wideband Monitor Kits

Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output

Not Yet Reviewed

$639.98

Ridetech Ridepro E5 Ride Height Sensor Kits

Ridetech Ridepro-HP Ride Height sensor kits upgrade your existing Ridepro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of Ridepro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. Ridetech complete Ridepro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses

2.0 out of 5 stars ( 1 )

$523.00

Lowdoller Motorsports K-Type EGT Probes

Lowdoller Motorsports K-type EGT probes, based on their design and materials, offer benefits that include high accuracy, rapid response time, and robust construction for motorsports applications. The Lowdoller probes use an Inconel sheath, a nickel-based super alloy known for its high-temperature strength and corrosion resistance. This allows the probes to withstand the extreme temperatures that are found in both high-performance and race engines. Leveraging on the reliable and widely used K-type thermocouple technology, these probes provide precise exhaust gas temperature (EGT) measurements, which are critical for both engine tuning and health.

Not Yet Reviewed

$638.50

—

$649.00

Lowdoller Motorsports Laser Ride Height Sensors

Lowdoller Motorsports laser ride height sensors are designed to provide precise information about the vehicle's height and movement, aiding in suspension setup for optimal performance. These laser sensors are used to accurately and continuously measure the vehicle's distance from the track surface, enabling precise aerodynamic tuning, suspension adjustments, and analysis of the car's behavior by calculating the cars pitch, roll, and heave movements. These sensors achieve this by projecting a laser that reflects off the track and is captured by a detector, which then sends data to a data logger or Engine Control Unit (ECU) for real-time analysis and adjustment.

Not Yet Reviewed

$504.50

Mopar Replacement Nitrogen Oxide Sensors

Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.

Not Yet Reviewed

$588.99

Haltech Dual Channel CAN O2 Wideband Controller Kits

Haltech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.

Not Yet Reviewed

$550.00

On Sale

MSD Power Grid Dual NTK Wideband O2 Modules

MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units that monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with MSD's Power Grid system controller (sold separately). They come with an extension harness, the sensors, connectors, and other parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)

1.0 out of 5 stars ( 1 )

$819.95

$736.95

Clearance

Standard Motor Battery Current and Voltage Sensors

Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.

Not Yet Reviewed

$538.99

—

$670.99

Standard Motor Camshaft Position Sensors

Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.

4.73 out of 5 stars ( 15 )

$547.99

FuelTech WB-O2 Sensors

Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.

Not Yet Reviewed

$699.00

Racepak Shock Travel Sensors

Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.

Not Yet Reviewed

$532.95

Granatelli Motor Sports Mass Airflow Sensors

Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.

3.5 out of 5 stars ( 6 )

$500.64

Standard Motor Blind Spot Detection Sensors

Standard Motor blind spot detection sensors are direct-fit OE replacements to ensure proper fit and function. They monitor the sides of your vehicle to notify the driver of unseen obstacles—helping you to avoid accidents, minor rear-end collisions, and inaccurate parking, as well as making safer lane changes on the highway. These blind spot detectors have a plug-and-play design for easy installation. Order the model recommended for your vehicle application.

1.0 out of 5 stars ( 1 )

$503.99

—

$749.99

Standard Motor Cruise Control Distance Sensors

One of the best creature comforts ever invented for drivers is cruise control. Standard Motor Products offers a full line of replacement cruise control distance sensors for fitment on a variety of vehicles. These precisely engineered sensors undergo rigorous testing to meet or exceed OE specs. Standard Motor cruise control distance sensors make long drives comfortable and safe.

Not Yet Reviewed

$517.99

—

$742.99

Denso Air/Fuel Ratio Sensors

Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time

4.67 out of 5 stars ( 24 )

$501.99

—

$527.99

Standard Motor Crankshaft Position Sensors

These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.

4.27 out of 5 stars ( 26 )

$660.99

Summit Bucks

Delphi Mass Airflow Sensors

Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.

4.65 out of 5 stars ( 104 )

$543.99

—

$600.99

Standard Motor Fuel Pressure Sensors

Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.

3.33 out of 5 stars ( 3 )

$565.99

—

$636.99

Standard Motor ABS Speed Sensors

Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.

4.88 out of 5 stars ( 17 )

$516.99

—

$689.99

Standard Motor Mass Airflow Sensors

Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.

1.0 out of 5 stars ( 2 )

$544.99

—

$659.99

Standard Motor Throttle Position Sensors

Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.

4.0 out of 5 stars ( 39 )

$523.99

—

$638.99

922 Results Found For "sensor"