Availability
Showing In Stock Items. Show All 1919 Items.
Schroth Racing Flexi 2x2 harnesses are the benchmark for professional racing. They feature Frontal Head Restraint (FHR) specific 2 in. shoulder belts, 2 in. Flexi lap belts, and a T-bar adjustable sub strap. The shoulder belts are designed to make FHR use safer and more comfortable, and the full 2 in. webbing fits perfectly on a FHR device, creating optimal force distribution on the surface of the device. Flexi lap belts can be changed from a pull-up configuration to a pull-down by simply rewrapping the lap hardware, allowing you to set the belt up just the way you want it for your specific situation. This also allows bolt-in brackets to be wrapped in for the lap belts if needed.
( 3 )
$569.00
—
$665.00
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$785.99
—
$802.99
Engineered for drag racing, Calvert Racing split mono-leaf springs have a higher spring rate and a stiffer ride than stock springs. Tested on the fastest stock suspension cars in the world, they are designed to control and reduce excessive body separation in rear suspension and plant the rear tires without unloading. The parabolic rear-half design distributes the main spring pressure point through the length of the half, reducing spring breakage. Calvert Racing split mono-leaf springs are assembled to order with Grade 8 hardware, heavy-duty alignment clamps, front aluminum bushings, and rear polyurethane bushings. They are stress-relieved and arch verified, available in several ride height options, and have been proven to withstand over 2,500 hp at 1/4 mile ETs in the 6s. Choose the springs designed for your vehicle.
( 47 )
$620.00
Schroth Racing Porsche GT3 Profi 2x2 belts are designed specifically for street cars with Porsche's factory one-piece carbon bucket seats. Unlike standard belts that require additional fabrication and a spacer to work with the factory seats, these GT3 lap belts use specific sewn-in brackets that fit perfectly on the factory mount of the Porsche carbon buckets. Schroth Racing Porsche GT3 Profi 2x2s feature Frontal Head Restraint (FHR)-specific 2 in. shoulder belts, 2 in. sewn GT3 laps, and an adjustable T-bar sub strap. The shoulder belts are designed to make FHR use safer and more comfortable, as the full 2 in. shoulder webbing fits perfectly on a Frontal Head Restraint device, creating optimal force distribution on the surface of the device. Available in several colors; choose your favorite. Specs: * Shoulders: Pull-down 2 in. * Laps: Pull-down 2 in. * Subs: Pull-up 2 in. * Homologation: FIA 8853-2016
Not Yet Reviewed
$765.00
Calvert Racing mono-leaf springs are available in various ride heights. The parabolic design helps to distribute the main spring pressure point through the entire length of the spring, thus, reducing spring breakage. Additional features include: * Direct replacement for most applications * Steel bushings in front eyes and Delrin® bushings in rear eyes * Center locator pins * Stress-relieved and arch verified * Substantially lighter than multi-leaf springs
Not Yet Reviewed
$620.00
GTA Racing cockpits from GTR Simulator offer an unrivaled level of precision and design. The groundbreaking design delivers the ultimate driving experience without causing discomfort or fatigue. The frame is manufactured from a durable alloy steel and then powdercoated in your choice of black, silver, or white. GTA racing cockpits also offer adjustable pedal angles, steering wheel position, steering wheel angle, and frame length. Select models are available with an optional fully reclinable racing seat that includes seat sliders. An optional large triple monitor stand is also available, which accommodates three 39 inch monitors.
( 6 )
$699.99
GTA Revolution racing simulators are the ultimate sim racing cockpit, delivering unparalleled rigidity and stability for the most immersive racing experience. Designed and engineered by GTR Simulator, these sim racing cockpits are the most rigid on the market, thanks to their thicker-walled aluminum profile and heavy-duty brackets. The GTA Revolution is available in different configurations to suit your needs, with the option to bring your own seat or choose from GTR Simulator's range of sim racing-specific seats. Whether you're a professional or a casual gamer, GTA Revolution racing simulators are the ultimate choice for an immersive, realistic racing experience. Features include: * GTA single seat slider * Adjustable steering wheel plate * Adjustable frame length * Adjustable pedal angle * Seat covers available in different colors Specifications: * Length: 57 in. * Steering height: 25 in. * Total heights: 40-45 in. * Width: 26 in. * Pedal plate angle: Adjustable * Gross weight: 26 kg * Frame material: Aluminum * Seat Material: Steel, synthetic leather
Not Yet Reviewed
$629.99
GTR Simulator's GTA Pro model simulators are professional-grade, and a step-up from the GTA models. They were designed and tested by professional racers, then tailored for ages three and up. They can comfortably accommodate drivers from 32 inches tall up to 7 feet! The frame is manufactured from a durable alloy steel and then powdercoated in your choice of black, silver, or white. GTA Pro model simulators also offer adjustable pedal angles, steering wheel position, steering wheel angle, adjustable shifter mount, and frame length. Select models are available with an optional fully reclinable racing seat. Racing seats are fixed, seat sliders are available separately. An optional large triple monitor stand is also available, which accommodates three 39 inch monitors.
( 4 )
$569.99
—
$784.99
Computech RaceAir Pro weather stations are competition weather analyzers and computers that will help you perfect your setup for the variable conditions around you. These top-of-the-line all-in-one electronic drag racing weather stations utilize highly precise digital sensors to detect even the smallest changes in atmospheric conditions that will impact your tuning and ET prediction decisions. They feature internal fan and automatic air sampling to provide highly accurate and repeatable results. RaceAir Pro features multi-line LCD displays that provide weather data and calculated values. Also extensive programs for drag racing, circle track, road racing, tractor pulling, and karting--all of which are accessed through the user-friendly keypad--no computer is necessary. One thing that will directly impact your racing performance, but you have no control over is the weather--especially when your day racing turns into night racing. Computech RaceAir Pro Weather Stations allow you to account and adjust for these changes to maintain racing consistency and success. Calculations and formulas: * Dial-in programs - Single run ET prediction - Database ET prediction * Throttle stop program * Multiple car prediction * Run completer * Test and tune - Holley - Precision jets - Fuel injection - Blower overdrive - Mikuni jets - Keihin jets - High speed - Square area * Drag racing performance - Full run standardizing - Intermediate run - Estimated 1/8 and 1/4 mile hp - Estimated ET and mph * Drag racing formulas - Gear ratio - Trap rpm - Converter slippage * Engine builder formulas - Calculate ratio - Calculate and pour chamber - Calculate and pour dome * Circle Track formulas - Gearing and tires - Engine rpm vs tire/gear change - Gear ratio - Tire size - MPH calculator - Tire stagger * Chassis setup by weight and percent * Fuel mileage * Liquid weights
( 5 )
$749.95
Altronics PerformAIRE Eclipse weather stations can measure the density of air in the atmosphere. These PerformAIRE computers contain a database that stores runs and then uses this data to automatically predict ETs and throttle stop settings. The predicted values are continually updated with each new sample of air, and the density altitude will be stored with each run. The stored runs are also tagged with a time and date stamp to allow for later referencing. The expandable database is capable of storing hundreds of runs in separate databases, which can be labeled for specific cars or tracks.
( 5 )
$584.99
—
$674.99
CVR mechanical vacuum pumps can be used on wet or dry sump engines and are designed with precision-sealed roller bearings. They are precision-machined from T-6 6061 aluminum and clear hard-anodized for extended wear. CVR pumps achieve greater vacuum sooner and are maintenance-free. They're also available as a kit with a mounting bracket for small block and big block Chevrolet cylinder heads, or any engine using a motor plate.
( 1 )
$560.99
Computech RaceAir weather stations utilize the same digital sensors as their Pro model, but without the extra calculations and formulas. These portable, hand-held analyzers feature automatic air sampling with an internal fan to deliver highly accurate results. And they provide the weather data and calculated values to assist in ET prediction and engine tuning. These RaceAir units are also upgradeable should your requirements change in the future. You can't control the weather—but with Computech RaceAir weather stations, you'll have every weather variable needed for consistent, successful runs at the track. Weather variables include: * Temperature * Humidity * Barometric pressure * Standard correction factor * Density altitude * Air density ratio * Dry barometer * Dew point * Wet bulb * Vapor pressure * Water vapor (grains) * Pressure altitude
( 1 )
$699.95
Altronics PerformAIRE weather stations are motorsports' most accurate and only patented air-quality computers. They monitor temperature, absolute barometric pressure, and relative humidity through their state-of-the-art electronic sensors. This information is transmitted into a microprocessor, where density, altitude, and predicted values are calculated and displayed. They offer incredible accuracy through exact scientific equations, formulated specifically for internal combustion engines.
( 12 )
$774.99
Summit Racing™ Pro LS forged H-beam connecting rods deliver industry-leading fit, finish, and durability at an affordable price. They're available in different size options, individually or in a set of 8. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Designed for up to 5,000 ft. per minute avg. piston speed in Street and Drag applications * ARP 2000 rod bolts with 200,000 psi tensile strength * Dual ribbing on rod cap for maximum strength * Stroker clearanced--minor cylinder notching may be required * Accommodates most camshafts with 4.250 stroke * Bores finished to +/- .0001 in. * Balanced to within +/- 1 gram per end * Full-floating with precision-honed bronze bushing * Small-end supports the wrist pin with minimal side clearance for maximum shear strength * Each rod is magnetic particle tested to ensure flawlessness * Shot-peened finish to remove potential for stress risers
( 19 )
$699.99
Summit Racing™ link bar hydraulic lifters are drop-in retrofit lifters designed to allow conversion to street hydraulic roller camshafts. These lifter bodies are machined from cold formed steel with clipped axles. They feature .700 in. diameter wheels and are designed for street use up to 6,500 rpm.
( 18 )
$620.99
—
$668.99
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 362 )
$564.99
$509.99
On Sale
RaceQuip Composite FIA racing seats are Pro Racing designed seats with thigh and hip support, integral shoulder and rib bolsters, and accommodates all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners
( 8 )
$599.95
$538.95
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 14 )
$624.99
—
$709.99
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
—
$779.99
Pull an engine, lift a cab, move heavy shop equipment, load your truck—the possibilities are endless with this 2,200 lb. capacity Summit Racing™ gantry crane! The all-steel unit adjusts from 94 1/4 in. to 141 1/2 in. in height to adapt to different jobs, and spans 94 in. to accommodate the widest vehicles. It rolls smoothly on four rubber-coated 5 in. locking swivel casters, and disassembles quickly (without tools) for storage and transport. The I-beam measures 3 in. wide by 4 3/4 in. tall, and the crane base is 47 1/4 in. wide.
( 23 )
$729.99
The Kirkey 81 Series aluminum road race seat and cover kits are designed for road racing, kit cars, and club racing. The 81 Series seats are a true road race design with built-in shoulder support and are MIG-welded from .100 in. and .190 in. thick 5052 grade aluminum. The aluminum extrusion around the seats perimeter provides extra strength and safety. Extra support at rib height provides support for high G force cornering but is designed to not interfere with shifting. The seats unique three-piece design allows for maximum vertical adjustment. Shoulder and back adjusts 2 1/2 in. vertically and head restraint adjusts an additional 3/4 in. vertically. The contoured high-density foam bottom provides inner thigh support. The 81 Series seats are designed to accommodate all head and neck restraint systems, as well as 5-point or 6-point seat belts. These seat and cover kits consists of aluminum seat and comes with a black cloth seat cover. The seats are available in five sizes, 14 in., 15 in., 16 in., 17 in., and 18.5 in., order the seat size for your application needs. Additional features include: * MIG-welded aluminum seat has a modular design * Reinforced head and shoulder restraints provide additional support * Energy absorbing impact padding on head restraint * The head is designed for easy entry and exit from the race car * Molded rubber inserts for all seat belt openings * 20-degree layback * Easy-to-install black cloth cover
( 1 )
$699.00
—
$739.00
On Sale
We understand that it doesn't matter whether you're cruising or racing--a comfortable set of seats is a must-have for any vehicle. These Summit Racing™ sport seat combos include two Summit Racing™ sport seats, two Scat seat mounting brackets, and two Summit Racing™ bracket adapters. With adjustable sliders, lumbar and shoulder supports, cutouts for safety harnesses, and recline and tilt forward mechanisms, these Summit Racing™ sport seat combos offer perfect adjustability and comfort for any road or track vehicle.
( 26 )
$693.94
—
$736.94
$593.94
—
$636.94
Building or refurbishing an engine is one of the most exciting endeavors a hobbyist can undertake. What's the next step after the engine build is complete? Take it for a test run on one of our Summit Racing™ engine run stands! These heavy-duty engine stands allow for a place to bolt a motor, then fire it up and run it for break-in, tuning, and to find and fix any problems, like leaks, before doing the final motor installation. The engine run stands are made from sturdy steel with a powdercoat finish for lasting service. They include threaded mounting posts to adjust engine mounts for proper height, and feature four sturdy, easy-roll casters with wheel lock to keep the unit from moving about. Take a test run you can trust with a Summit Racing™ engine run stand!
( 57 )
$731.99
On Sale
RaceQuip Composite Full Containment FIA racing seats are Pro Racing designed seats with right and left head supports, extra-tall thigh and hip support, integral deep shoulder and rib bolsters, and they accommodate all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners
( 1 )
$849.95
$763.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
